YAGEO CC0402MRX5R9BB103 Surface mount multilayer ceramic capacitor Datasheet

DATA SHEET
SURFACE MOUNT MULTILAYER
CERAMIC CAPACITORS
General purpose & High capacitance
Class 2, X5R
4 V TO 50 V
100 pF to 220 µF
Product Specification – January 12, 2017 V.23
RoHS compliant & Halogen free
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP
This specification describes X5R
series chip capacitors with leadfree terminations.
CTC & 12NC
APPLICATIONS
PCs, Hard disk, Game PCs
Power supplies
DVD players
Mobile phones
Data processing
GLOBAL PART NUMBER (PREFERRED )
2
18
All part numbers are identified by the series, size, tolerance, TC material,
packing style, voltage, process code, termination and capacitance value.
YAGEO BRAND ordering code
CC
XXXX X X
(1)
X5R
(2) (3)
X
BB
XXX
(4)
(5)
(1) SIZE – INCH BASED (METRIC)
0201 (0603)
0402 (1005)
FEATURES
Supplied in tape on reel
Nickel-barrier end termination
RoHS compliant
Halogen free compliant
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
(2) TOLERANCE
K = ± 10%
M = ± 20%
(3) PACKING STYLE
R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
C = Bulk case
(4) RATED VOLTAGE
4=4V
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
(5) CAPACITANCE VALUE
2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 103 = 10 x 103 = 10,000 pF = 10 nF
www.yageo.com
Jan. 12, 2017 V.23
3
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
18
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered
with a layer of plated tin (NiSn).
The terminations are lead-free. A
cross section of the structure is
shown in Fig.1.
Fig. 1 Surface mount multilayer ceramic capacitor construction
DIMENSION
OUTLINES
Table 1 For outlines see fig. 2
TYPE
0201
0402
0603
0805
1206
1210
L1 (mm)
W (mm)
L2 / L3 (mm)
L4
(mm)
min.
max.
min.
T (MM)
DIMENSION
CODE
0.6 ± 0.03
0.3 ± 0.03
0.3 ± 0.03
0.1
0.2
0.2
BA
0.6 ± 0.05
0.6 ± 0.09
0.3 ± 0.05
0.3 ± 0.09
0.3 ± 0.05
0.3 ± 0.09
0.1
0.1
0.2
0.25
0.2
0.2
BB
BC
0.6 ± 0.15
1.0 ± 0.05
0.3 ± 0.15
0.5 ± 0.05
0.3 ± 0.15
0.5 ± 0.05
0.1
0.15
0.25
0.35
0.2
0.4
BD
CA
1.0 ± 0.10
1.0 ± 0.15
0.5 ± 0.10
0.5 ± 0.15
0.5 ± 0.10
0.5 ± 0.15
0.15
0.15
0.35
0.35
0.4
0.4
CB
CC
1.0 ± 0.20
1.6 ± 0.10
0.5 ± 0.20
0.8 ± 0.10
0.5 ± 0.20
0.8 ± 0.10
0.15
0.2
0.35
0.6
0.4
0.4
CD
DA
1.6 ± 0.15
1.6 ± 0.20
0.8 ± 0.15
0.8 ± 0.20
0.8 ± 0.15
0.8 ± 0.20
0.2
0.2
0.6
0.6
0.4
0.4
DB
DC
2.0 ± 0.20
2.0 ± 0.20
1.25 ± 0.20
1.25 ± 0.20
0.85 ± 0.10
1.25 ± 0.20
0.25
0.25
0.75
0.75
0.55
0.55
EA
EB
3.2 ± 0.3
3.2 ± 0.3
1.6 ± 0.2
1.6 ± 0.2
1.15 ± 0.10
1.25 ± 0.20
0.25
0.25
0.75
0.75
1.4
1.4
FA
FB
3.2 ± 0.3
3.2 ± 0.3
1.6 ± 0.2
1.6 ± 0.3
1.6 ± 0.2
1.6 ± 0.3
0.25
0.3
0.8
0.9
1.4
1.4
FC
FD
3.2 ± 0.20
3.2 ± 0.20
2.5 ± 0.20
2.5 ± 0.20
1.25 ± 0.20
1.9 ± 0.20
0.25
0.25
0.75
0.75
1.4
1.4
GA
GB
3.2 ± 0.20
3.2 ± 0.30
2.5 ± 0.20
2.5 ± 0.30
2.5 ± 0.20
2.5 ± 0.30
0.25
0.25
0.75
0.75
1.0
1.0
GC
GD
For dimension see Table 1
Fig. 2 Surface mount multilayer
ceramic capacitor dimension
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
CAPACITANCE RANGE & THICKNESS FOR X5R
Table 2 Sizes from 0201 to 0402
0201
CAP.
4V
General Purpose & High Cap.
10 V
16 V
25 V
50 V
100 pF
BA
BA
BA
BA
BA
150 pF
BA
BA
BA
BA
BA
220 pF
BA
BA
BA
BA
BA
330 pF
BA
BA
BA
BA
BA
470 pF
BA
BA
BA
BA
BA
680 pF
BA
BA
BA
BA
BA
1.0 nF
BA
BA
BA
BA
BA
1.5 nF
BA
BA
BA
BA
2.2 nF
BA
BA
BA
BA
3.3 nF
BA
BA
BA
BA
4.7 nF
BA
BA
BA
BA
6.8 nF
BA
BA
BA
BA
10 nF
BA
BA
BA
BA
15 nF
BA
BA
BA
22 nF
BA
BA
BA
33 nF
BA
BA
47 nF
BA
68 nF
100 nF
4V
6.3 V
10 V
16 V
25 V
50 V
CA
CA
CA
CA
CA
BA
CA
CA
CA
CA
CA
BA
BA
CA
CA
CA
CA
CA
BA
BA
BA
CA
CA
CA
CA
CA
BA
BA
BA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CB
CB
CB
CA
CA
BA
BB
150 nF
BA
BA
BA
BA
330 nF
470 nF
BA
4 V to 50 V
0402
6.3 V
220 nF
X5R
4
18
BA
BA
BA
680 nF
1.0 µF
BB
BB
BB
CA
CA
CA
CA
2.2 µF
BC
BC
BC
CA
CA
CC
CD
4.7 µF
BD
CC
CC
CC
CC
10 µF
CD
CD
CD
22 µF
CD
CD
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is available on request
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
CAPACITANCE RANGE & THICKNESS FOR X5R
Table 3 Sizes from 0603 to 0805
0603
CAP.
4V
General Purpose & High Cap.
X5R
4 V to 50 V
5
18
0805
6.3 V
10 V
16 V
25 V
50V
220 nF
DA
DA
DA
DA
DA
330 nF
DA
DA
DA
DA
DA
470 nF
DA
DA
DA
DA
DA
680 nF
DA
DA
DA
DA
DA
1.0 µF
DA
DA
DA
DA
DA
2.2 µF
DA
DA
DA
DB
DC
4.7 µF
DA
DA
DB
DB
10 µF
DB
DC
DC
DC
22 µF
DC
DC
4V
6.3 V
10 V
16 V
25 V
50V
EA
EA
EA
EB
EB
EB
EB
EB
EA
EA
EA
EB
EB
EB
EB
EB
EA
EA
EA
EB
EB
EB
EB
EB
EA
EA
EA
EA
EB
EB
EB
EB
EA
EA
EB
EB
EB
EB
EB
EA
EA
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
10 nF
15 nF
22 nF
33 nF
47nF
68 nF
100 nF
150 nF
47 µF
DC
DC
100 µF
EB
EB
EB
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is available on request
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
6
18
Table 4 Sizes from 1206 to 1210
CAP.
1206
4V
1210
6.3 V
10 V
16 V
25 V
50V
6.3 V
10 V
16 V
25 V
50V
1.0 µF
FA
FA
FA
FA
FC
GA
GA
GA
GA
GA
2.2 µF
FA
FA
FA
FA
FC
GB
GB
GB
GB
GB
4.7 µF
FC
FC
FC
FC
FC
GB
GB
GB
GB
GC
10 µF
FC
FC
FC
FC
FD
GB
GB
GB
GB
GC
22 µF
FC
FC
FC
FD
GC
GC
GC
GD
47 µF
FC
FC
FD
GC
GC
GC
100 µF
FD
GD
GD
GD
10 nF
15 nF
22 nF
33 nF
47nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
220 µF
FD
GD
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is available on request
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
7
18
THICKNESS CLASSES AND PACKING QUANTITY
Table 5
SIZE
CODE
0.3 ± 0.03 mm
8 mm
15,000
---
50,000
---
---
0.5 ± 0.05 / 0.1 mm
8 mm
10,000
---
50,000
---
50,000
0.5 ± 0.15 / 0.2 mm
8 mm
10,000
---
40,000
---
---
0.8 ± 0.1 mm
8 mm
4,000
---
15,000
---
15,000
0.6 ± 0.1 mm
8 mm
4,000
---
20,000
---
10,000
0.85 ± 0.1 mm
8 mm
4,000
---
15,000
---
8,000
1.25 ± 0.2 mm
8 mm
---
3,000
---
10,000
5,000
0.6 ± 0.1 mm
8 mm
4,000
---
20,000
---
---
0603
0805
1206
Ø 330 MM / 13 INCH
Paper
Blister
TAPE WIDTH
QUANTITY PER REEL
0201
0402
Ø 180 MM / 7 INCH
Paper
Blister
THICKNESS
CLASSIFICATION
QUANTITY
PER BULK CASE
0.85 ± 0.1 mm
8 mm
4,000
---
15,000
---
---
1.00 / 1.15 ± 0.1 mm
8 mm
---
3,000
---
10,000
---
1.25 ± 0.2 mm
8 mm
---
3,000
---
10,000
---
1.6 ± 0.15 mm
8 mm
---
2,500
---
10,000
---
1.6 ± 0.2 mm
8 mm
---
2,000
---
8,000
---
0.6 / 0.7 ± 0.1 mm
8 mm
---
4,000
---
15,000
---
0.85 ± 0.1 mm
8 mm
---
4,000
---
10,000
---
1.15 ± 0.1 mm
8 mm
---
3,000
---
10,000
---
1.15 ± 0.15 mm
8 mm
---
3,000
---
10,000
---
1.25 ± 0.2 mm
8 mm
---
3,000
---
---
---
1.5 ± 0.1 mm
8 mm
---
2,000
---
---
---
1.6 / 1.9 ± 0.2 mm
8 mm
---
2,000
---
---
---
---
---
---
---
---
---
1210
2.0 ± 0.2 mm
8 mm
---
2,000
1,000
2.5 ± 0.2 mm
8 mm
---
1,000
500
www.yageo.com
Jan. 12, 2017 V.23
8
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
18
4 V to 50 V
ELECTRICAL CHARACTERISTICS
X5R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all tests and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
Temperature: 15 °C to 35 °C
-
Relative humidity: 25% to 75%
Air pressure: 86 kPa to 106 kPa
-
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 6
VALUE
DESCRIPTION
Capacitance range
100 pF to 220 µF
Capacitance tolerance
± 10% and ± 20%
Dissipation factor (D.F.)
X5R
≤ 6.3V
0201
0402
0603
0805
1206
1210
D.F.
100pF to 10nF
22nF to 100nF
220nF to 1uF
470nF to 680nF
1uF to 10uF
1uF to 10uF
≤ 5%
22uF
≤ 7%
47uF to 220uF
≤ 10%
120nF to 220nF
12nF to 1uF
330nF to 10uF
2.2uF to 47uF
1uF to 100uF
2.2uF
10V
16V
100uF, 220uF
4.7uF
22uF
100pF to 10nF
22nF to 100nF
220nF to 470nF
470nF to 680nF
120nF to 220nF
680nF
1uF
330nF to 10uF
1uF to 22uF
2.2uF to 47uF
12nF to 220nF, 1uF
22uF to 47uF
≤ 15%
≤ 20%
1uF to 4.7uF
1uF to 4.7uF
≤ 7%
10uF to 47uF
10uF to 100uF
≤ 15%
2.2uF
≤ 20%
100pF to 10nF
22nF to 100nF
220nF to 470nF
470nF to 680nF
120nF to 220nF
680nF to 1uF
1 uF to 2.2μF
470nF to 4.7uF
2.2uF to 10uF
4.7uF to 22uF
1uF to 4.7uF
1uF to 4.7uF
100pF to 10nF
≤ 5%
≤ 7%
10uF to 47uF
10uF to 100uF
470nF
50V
≤ 10%
470nF
12nF to 220nF
25V
≤ 5%
≤ 10%
≤ 20%
22nF
470nF to 1uF
1uF to 2.2uF
1uF to 4.7uF
≤ 3.5%
2.2uF
4.7uF
10uF
≤ 5%
27nF to 100nF
220nF to 470nF
120nF to 220nF
680nF to 1uF
22nF, 100nF
470nF to 2.2uF
2.2uF to 10uF
100pF to 1nF
22nF
≤ 3.5%
27nF to 120nF
≤ 5%
150nF to 220nF
≤ 7%
470nF
Insulation resistance after 1 minute at Ur (DC)
220nF to 2.2uF
Maximum capacitance change as a function of temperature
(temperature
characteristic/coefficient):
Operating
temperature
range:
≤ 7%
4.7uF to 22uF
470nF to 10uF
10uF to 22uF
1uF to 10uF
22uF
1uF to 10uF
≤ 10%
≤ 10%
Rins ≥ 10 GΩ or Rins × Cr ≥ 500(50)* seconds whichever is less
± 15%
–55 °C to +85 °C
NOTE
* For individual I.R specification, please contact local sales.
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
Fig. 3
General Purpose & High Cap.
X5R
4 V to 50 V
9
18
Typical capacitance change as a function of
temperature
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
10
18
Size 0201 10 nF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0603 1 µF / 10 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
11
18
Size 0805 10 µF / 6.3 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 1206 10 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
12
18
Size 1210 10 µF / 25 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
SOLDERING RECOMMENDATION
Table 7
SIZE
SOLDERING
0201
METHOD
Reflow
Reflow/Wave
Reflow only
0402
0603
0805
1206
≥ 1210
> 100 nF
> 1µF
> 2.2 µF
> 2.2 µF
Reflow only
≤ 100 nF
≤ 1µF
≤ 2.2 µF
≤ 2.2 µF
---
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
13
18
TESTS AND REQUIREMENTS
Table 8 Test procedures and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Mounting
IEC 60384- 4.3
21/22
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Any applicable method using × 10 magnification
In accordance with specification
Visual
Inspection and
Dimension
Check
4.4
Capacitance (1)
4.5.1 Class 2:
At 20 °C, 24 hrs after annealing
Within specified tolerance
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Dissipation
Factor (D.F.) (1)
4.5.2 Class 2:
At 20 °C, 24 hrs after annealing
In accordance with specification
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Insulation
Resistance
4.5.3 At Ur (DC) for 1 minute
In accordance with specification
NOTE
1. The figure indicates typical inspection. Please refer to individual specifications.
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
TEST
TEST METHOD
Temperature
4.6
Characteristic
General Purpose & High Cap.
X5R
REQUIREMENTS
Capacitance shall be measured by the steps shown in the
following table.
<General purpose series>
Class1:
∆ C/C: ± 30ppm
The capacitance change should be measured after 5 min at
each specified temperature stage.
Step
Temperature(℃)
a
25± 2
b
Lower temperature± 3℃
c
25± 2
d
Upper Temperature± 2℃
e
25± 2
18
4 V to 50 V
PROCEDURE
14
Class2:
X7R: ∆ C/C: ± 15%
Y5V: ∆ C/C: 22~-82%
<High Capacitance series>
Class2:
X7R/X5R: ∆ C/C: ±15%
Y5V: ∆ C/C: 22~-82%
(1) Class I
Temperature Coefficient shall be calculated from the
formula as below
C2 - C1
106 [ppm/℃]
Temp, Coefficient =
C1 xΔT
C1: Capacitance at step c
C2: Capacitance at 125℃
∆T: 100℃(=125℃-25℃)
(2) Class II
Capacitance Change shall be calculated from the formula
as below
C2 - C1
∆C =
x 100%
C1
C1: Capacitance at step c
C2: Capacitance at step b or d
Adhesion
Bending
Strength
IEC 6038421/22
4.7
A force applied for 10 seconds to the line joining the
terminations and in a plane parallel to the substrate
Force
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
4.8
Mounting in accordance with IEC 60384-22 paragraph 4.3
No visible damage
Conditions: bending 1 mm at a rate of 1 mm/s, radius jig
5 mm
∆C/C
Class2:
X5R: ± 12.5%
Test Substrate:
b
C
4.5
Dimension(mm)
YNSC147
40
a
100
Unit: mm
Type
a
b
c
0201
0.3
0.9
0.3
0402
0.4
1.5
0.5
0603
1.0
3.0
1.2
0805
1.2
4.0
1.65
1206
2.2
5.0
1.65
1210
2.2
5.0
2.0
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
TEST
TEST METHOD
Resistance to
Soldering
Heat
4.9
General Purpose & High Cap.
X5R
4 V to 50 V
15
18
PROCEDURE
REQUIREMENTS
Precondition: 150 +0/–10 °C for 1 hour, then keep for
24 ± 1 hours at room temperature
Dissolution of the end face plating shall
not exceed 25% of the length of the
edge concerned
Preheating: for size ≤ 1206: 120 °C to 150 °C for 1
minute
Preheating: for size >1206: 100 °C to 120 °C for 1
minute and 170 °C to 200 °C for 1 minute
<General purpose series>
Solder bath temperature: 260 ± 5 °C
∆C/C
Class2:
X5R: ± 10%
Dipping time: 10 ± 0.5 seconds
<High Capacitance series>
Recovery time: 24 ± 2 hours
∆C/C
Class2:
X5R: ± 10%
D.F. within initial specified value
Rins within initial specified value
Solderability
4.10
Preheated the temperature of 80 °C to 140 °C and
maintained for 30 seconds to 60 seconds.
The solder should cover over 95% of
the critical area of each termination
1. Temperature: 235± 5°C / Dipping time: 2 ± 0.5 s
2. Temperature: 245± 5°C / Dipping time: 3 ± 0.5 s
(lead free)
Depth of immersion: 10mm
Rapid Change
of
Temperature
IEC 6038421/22
4.11
Preconditioning;
150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at
room temperature
No visual damage
<General purpose series>
∆C/C
5 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
Class2:
X5R: ± 15%
<High Capacitance series>
Recovery time 24 ± 2 hours
∆C/C
Class2:
X5R: ± 15%
D.F. meet initial specified value
Rins meet initial specified value
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
TEST
Damp Heat
with Ur Load
TEST METHOD
4.13
General Purpose & High Cap.
X5R
4 V to 50 V
PROCEDURE
REQUIREMENTS
1. Preconditioning, class 2 only:
No visual damage after recovery
150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour
at room temp
2. Initial measure:
Spec: refer to initial spec C, D, IR
3. Damp heat test:
500 ± 12 hours at 40 ± 2 °C;
90 to 95% R.H. 1.0 Ur applied
4. Recovery:
Class 2: 24 ± 2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be preconditioned
according to “IEC 60384 4.1” and then the
requirements shall be met.
16
18
<General purpose series>
∆C/C
Class2:
X5R: ± 15%
D.F.
Class2:
X5R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
Rins
Class2:
X5R: ≥ 500 MΩ or Rins x Cr ≥ 25s
whichever is less
<High Capacitance series>
∆C/C
Class2:
X5R: ± 20%
D.F.
Class2:
X5R: 2 x initial value max
Rins
Class2:
Rins x Cr ≥ 5s
whichever is less
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
TEST
Endurance
General Purpose & High Cap.
X5R
TEST METHOD
PROCEDURE
REQUIREMENTS
IEC 6038421/22
1. Preconditioning, class 2 only:
No visual damage
4.14
150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour at
room temp
2. Initial measure:
Spec: refer to initial spec C, D, IR
3. Endurance test:
Class2:
X5R: ± 15%
0201: 100nF/25V, 220nF/10V,/ 1uF, 2.2uF/ 4V, 6.3V
0402: 4.7uF/16V, 10V, 6.3V; 10uF/4V, 6.3V
Class2:
X5R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s
0603: 10uF/ 10V; 22uF/6.3V, 10V; 47uF/4V
whichever is less
1206: 10uF/ 50V;
4. Recovery time: 24 ± 2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be preconditioned
according to “IEC 60384 4.1” and then the requirements
shall be met.
* General product:
0201 ≤ 10nF
0402 ≤ 100nF
0603 ≤ 470nF
0805, 1206, 1210 ≤ 1uF
4.6
∆C/C
D.F.
47uF/ 6.3V, 10V; 100uF/ 4V
* High cap product:
0201 > 10nF
0402 > 100nF
0603 > 470nF
0805, 1206, 1210 > 1uF
Specified stress voltage applied for 1~5 seconds
Ur ≤ 100 V: series applied 2.5 Ur
18
<General purpose series>
Temperature: X5R: 85 °C
Specified stress voltage applied for 1,000 hours:
Applied 2.0 x Ur for general product*.
Applied 1.5 x Ur for high cap. product*.
Applied 1.0 x Ur for high cap. product*.
0805: 10uF/ 25V, 50V; 22uF/ 6.3V, 10V, 16V
Voltage
Proof
4 V to 50 V
17
Class2:
X5R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
Rins
<High Capacitance series>
∆C/C
Class 2:
X5R: ± 20%
D.F.
Class 2:
X5R: 2 x initial value max
Rins
Class 2:
Rins x Cr ≥ 10s
whichever is less
No breakdown or flashover
100 V < Ur ≤ 200 V series applied
(1.5 Ur + 100)
200 V < Ur ≤ 500 V series applied
(1.3 Ur + 100)
Ur > 500 V: 1.3 Ur
Ur ≧ 1000 V: 1.2 Ur
Charge/Discharge current is less than 50 mA
www.yageo.com
Jan. 12, 2017 V.23
Product specification
Surface Mount Multilayer Ceramic Capacitors
General Purpose & High Cap.
X5R
4 V to 50 V
18
18
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 23
Nov. 15, 2016
-
- Dimension updated
Version 22
Oct. 3, 2016
-
- Dimension and Soldering recommendation updated
Version 21
Jan. 28, 2016
-
- Tests and requirements updated
Version 20
Dec. 04, 2015
-
- Size updated
Version 19
Apr. 09, 2015
-
- Voltage updated
Version 18
Jul. 07, 2014
-
- Voltage updated
Version 17
Mar. 31, 2014
-
- Test condition updated
Version 16
Nov. 29, 2012
-
- Test condition updated
Version 15
Sep. 03, 2012
-
- Test condition updated
Version 14
May 16, 2012
-
- Product range updated
Version 13
May 02, 2012
-
- Product range updated
Version 12
Feb 10, 2012
-
- Product range updated
Version 11
Oct 21, 2011
-
- Product range updated
Version 10
Jun 21, 2011
-
- Product range updated
Version 9
Mar 23, 2011
-
- Product range updated
Version 8
Jan 25, 2011
-
- Rated voltage of 0201 extend to 50V
Version 7
Jan 05, 2011
-
- Product range updated
Version 6
Jul 27, 2010
-
- Dimension on 0603 and 1206 case size updated
Version 5
Apr 21, 2010
-
- The statement of "Halogen free" on the cover added
- Dimension updated
Version 4
Jan 13, 2010
-
- Thickness updated
Version 3
Aug 17, 2009
-
- Dimension updated
Version 2
Jun 09, 2009
-
- Ordering code updated
Version 1
May 15, 2009
-
- Product range updated
Version 0
Apr 15, 2009
-
- New datasheet for general purpose and high capacitance X5R series with
RoHS compliant
- Replace the "6.3V to 50V" part of pdf files: UP-X5R_X7R_HighCaps_6.3to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11
- Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2
and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2
- Define global part number
- Description of "Halogen free compliant" added
- Test method and procedure updated
www.yageo.com
Jan. 12, 2017 V.23
Similar pages