J860 RoHS Compliant E197851 15.0 x 7.5 x 9.4 mm Features • • • • • Monostable Passes FCC part 68 & Telcordia surge test Ultra low weight, small package size UL/CUL certified Bifurcated Contacts Contact Data* Contact Arrangement 2C = DPDT Contact Resistance < 50 milliohms initial Contact Rating 2A @ 30VDC Contact Material AgNi, Au clad - bifurcated .5A @ 125VAC Maximum Switching Power 60W Maximum Switching Voltage 250VAC, 220VDC Maximum Switching Current 2A Coil Data* Coil Voltage VDC Rated Max 5 6.5 Coil Resistance Ω ± 10% Pick UP Voltage VDC (max) Release Voltage VDC (max) 75% of rated voltage 10% of rated voltage 3.75 .45 178 6 7.8 257 4.50 .60 9 11.7 579 6.75 .50 12 18.0 1028 9.00 1.2 24 36.0 2880 18.00 2.4 Coil Power W Operate Time ms Release Time ms .14 4 4 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 1500V rms min. @ sea level initial Contact to Contact 1000V rms min. @ sea level initial Between Poles 1000V rms min. @ sea level initial Initial Surge Voltage, Coil to Contact Contact to Contact * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 2500V (Telcordia, 2x10us) 1500V (FCC part 68, 10x60us) Shock Resistance 750m/s2 for 11 ms Vibration Resistance 3mm double amplitude 10~40Hz Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 2g www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J860 Ordering Information 1. Series J860 2C S 12VDC J860 2. Contact Arrangement 2C = DPDT 3. Sealing Option S = Sealed 4. Operating Function Blank = Monostable 5. Coil Voltage 5VDC 6VDC 9VDC 12VDC 24VDC Dimensions Schematic Units = mm page 2 Bottom View www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice.