Bi HA72T-06R68LF High power high performance molded surface mount inductor Datasheet

Magnetics
Make Possible
High Power High Performance
Molded Surface Mount Inductors
Model HA72T-06 Series
Features
Operating & Storage Temperature -55°C to +180°C
Temperature Rise, Maximum 50°C
Operating Frequency Up to 3MHz
AEC-Q200 CERTIFIED
Specification @ 25°C
HA72T-06R10LF
HA72T-06R20LF
HA72T-06R33LF
HA72T-06R47LF
HA72T-06R68LF
HA72T-061R0LF
HA72T-061R5LF
HA72T-062R2LF
HA72T-063R3LF
HA72T-064R7LF
HA72T-066R8LF
HA72T-068R2LF
HA72T-06100LF
HA72T-06330LF
DCR (mΩ)
Inductance
μH±20%
Heating
Current(2)
(Adc)
Isat
(Adc)
Typ.
Max.
0.10
0.20
0.33
0.47
0.68
1.00
1.50
2.20
3.30
4.70
6.80
8.20
10.0
33.0
26.2
20.3
18.0
16.1
14.4
10.3
8.4
8.3
6.6
5.4
4.1
3.5
3.2
1.8
45.0
34.0
22.0
19.0
16.5
15.0
10.0
8.5
8.0
6.5
5.0
4.2
4.0
2.5
1.5
2.5
3.2
4.0
5.0
9.0
13.0
18.0
26.5
39.0
62.0
80.0
100.0
302.0
1.7
2.8
3.9
4.2
5.5
10.0
14.0
20.0
30.0
42.0
68.0
100.0
105.0
332.0
(1)
Part Number
(3)
Notes:
(1) Inductance is measured at 100 kHz, 0.1Vac without DC current.
(2) The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by soldering
the component on a typical application PCB, and then applying the current to the device for 30 minutes.
(3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value.
(4) The part temperature (ambient + temperature rise) should not exceed 180°C.
Outline Dimensions (mm)
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsmagnetics.com
© TT Electronics plc
Rev. 01
High Power High Performance
Molded Surface Mount Inductors
Make Possible
Model HA72T-06 Series
Electrical Characteristic @ 25°C
Packaging / Ordering Information
One reel (13”)
2000 pcs
One shipping carton (6 reels)
12000 pcs
Ordering Information
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsmagnetics.com
© TT Electronics plc
Rev. 01
Similar pages