BNC75 Receptacle Connector for Broadcast BNC75 Series for 12G-SDI RoHS Compliant Compliant Characteristic Impedance 75 Ω Lock Type Bayonet OUTLINE ◆ BNC75 series for broadcasting equipment is a high performance 75 Ω connector which is compliant with the 12G-SDI standard by improving impedance matching of the conventional product. APPLICATIONS Broadcast equipment (Switcher, Professional video camera, Monitor) FEATURES ◆ Excellent high-frequency characteristics（12G-SDI compliant） ◆ Angle type and straight type are available. CONNECTOR TYPES Angle type for PCB （Automatic mounting）： 2 ～ 3 page Angle type for PCB （Manual mounting） ： 4 ～ 6 page Straight type for PCB（Manual mounting） ： 7 ～ 8 page ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. 170810 http://www.ddknet.co.jp BNC75 Series for 12G-SDI Unit：mm ○ Angle type for PCB (Automatic mounting) RoHS Compliant Compliant OUTLINE ◆ Hybrid type utilized advantage of angle type and edge mounting type ◆ Excellent high-frequency characteristics in the industry Hybrid type Hybrid type APPLICATIONS Broadcast equipment (Switcher, Angle type Angle type Professional video camera, Monitor)・Ease mouting <Advantage> <Advantage> ・Good characteristics ・Easy structure and low cost ・Good characteristics ・Easy structure and low cost <Disadvantage> <Disadvantage> ・Tendency of poor high ・No positioning mouting <Disadvantage> part ・No positioning mouting part <Disadvantage> frequency characteristics ・Tendency of・High poor complexity high and high cost frequency characteristics ・High complexity and high cost FEATURES Edge mouting type Edge mouting type Resolve both disadvantages！ Resolve both disadvantages！ <Advantage> <Advantage> ・Ease mouting ◆ Excellent high-frequency characteristics（12G-SDI compliant） ◆ The protrusions of the mounting part improve the positional accuracy (Patent pending). ◆ Significant weight saving（less than 50% in comparison with our conventional angle type) Return Loss 〔dB〕 【High-frequency characteristic】 Adsorption surface ！ Return Loss（BNC75-LR1-PCE） 0 5 10 15 20 25 30 35 40 45 50 Ensure adequate solder area! 【Automatic mounting】 Ensure adequate solder area! Adsorption surface ！ Mounting part Mounting part PCB Automatic PCB Through hole PCB Automatic 12G-SDI spec This protrusions improve the positional accuracy! BNC75-LR1-PCE 0 2 4 6 8 Frequency 〔GHz〕 10 PCB Through hole 12 SPECIFICATIONS Material / Finish Characteristic Impedance 75 Ω Frequency Range 12GHz Max. Rated Voltage AC500V(r.m.s.) Item Contact Dielectric Withstanding Voltage AC1,000V(r.m.s.) ／ 1 minute Insulation Resistance Return Loss Operating Temperature This protrusions improve the positional accuracy! 1,000M Ω Min. at 500V DC Material ／ Finish Copper Alloy / Au Plating Outer Contact Zinc Alloy Die cast / Ni plating Insulator PTFE 20dB Min.( ～ 3GHz) 10dB Min.( ～ 12GHz) -40 ～ +85℃ ※ Specifications may vary depending on the connector. Please check the specifications before use. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 2 BNC75 Series for 12G-SDI ○ Angle type for PCB (Automatic mounting) BNC75-LR1-PCE BNC75-LR1-PCE 15 14.5 11 6.5 Ø 6.5 8.5 (13.65) 6.5 +0.2 0 9.9 4.95 8.5 6.5 (13.65) .2 +0 0 7 2. 4.95 Panel mounting dimensions (t=2 Max.) +0.2 1.25 4-Ø1.65 0 （Through hole inner diameter） End face of PCB 2.8 Position of Body and contact：2.5 3（Pad dimention） 12.8 （Outer diameter of contact：Ø0.6） PCB mounting dimensions (t=2.6) Pad（Signal） 1.25 7 11 13 5.7 3（Pad dimention） Pad（Signal） (29) 3 11 （Through hole inner diameter） Position of Body and contact：2.5 （Outer diameter of contact：Ø0.6） 7 11 4-Ø1.5 M2.6×0.45 Panel mounting dimensions (t=2 Max.) 4.85 0.7 Width across flats：9.7 Width across flats：9.7 0.7 8.85 4.8 4-3.3 4-3.3 +0.2 4-Ø1.65 0 2 5.7 .2 +00 8.85 1. .2 +0 0 7 2. Ø .4 11 (29) Ø1 5.7 M2.6×0.45 15 Ø 4.8 2 .2 +00 14.5 5.7 1. .4 11 2 4-Ø1.5 Ø1 13 4.85 2 +0.2 0 13 16 16 9.9 ■ BNC75-LR1-PCE （Single） Ø 12.8 3 13 End face of PCB 2.8 PCB mounting dimensions (t=2.6) BNC75-2LR1-PCE ■ BNC75-2LR1-PCE （Double） 3.5 6-Ø1.9 31 +0 0 .2 7 6.5 +0.2 0 9.9 9.7 BNC75-2LR1-PCE 4.85 4-3.3 6.5 .4 0.7 Ø1 .2 +0 0 8.85 1.2 2. M2.6×0.45 2 11 4.8 8±0.1 8 Ø 13 ±0.1 28.5 16 Ø ±0.1 16 Panel mounting dimensions (t=2 Max.) 14.5 (29) (5.5) 29.3 +0.2 9.9 0 ±0.05 PCB mouting dimensions (t=2.6) Position of body and contact：2.5 （Outer diameter of contact：Ø0.6） 3 1.2 +0.1 -0.05 6-Ø2.1 （Through hole inner diameter) Pad （Signa (5.5) Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. Panel mounting di 3 ±0.1 (29) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. http://www.ddknet.co.jp 1 11.8 31 7.5 12 ±0.05 9.7 5.5 ±0.1 2.8 4.85 5.5 2.8 16 16 8 6.5 5.5 0.7 14.5 5.5 4-3.3 3 .4 27 1.2 Ø1 3.5 6-Ø1.9 8±0.1 End face of PCB .2 +0 0 8.85 8 （Through hole inner diameter) 11 M2.6×0.45 2 Pad（Signal） 8 （Outer diameter of contact：Ø0.6） 1.2 +0.1 6-Ø2.1-0.05 1.25 Position 13 of body and contact：2.5 27 16 3 28.5 Ø 4.8 Unit：mm En BNC75 Series for 12G-SDI Unit：mm ○ Angle type for PCB (Manual mounting) RoHS Compliant Compliant OUTLINE ◆ High performance connector of angle type for PCB. ◆ Various variations are possible, because it is produced by machining. APPLICATIONS Broadcast equipment (Switcher, Professional video camera, Monitor) FEATURES ◆ Excellent high-frequency characteristics（12G-SDI compliant） ◆ Lineup of middle mount type and edge mount type (bulkhead) Return Loss 〔dB〕 【High-frequency characteristic】 Return Loss（BNC75-LBR-PC-2） 0 5 10 15 20 25 30 35 40 45 50 12G-SDI spec BNC75-LBR-PC-2 0 2 4 6 8 Frequency 〔GHz〕 10 12 Material / Finish SPECIFICATIONS Characteristic Impedance 75 Ω Frequency Range 12GHz Max. Rated Voltage AC500V(r.m.s.) Item Contact Dielectric Withstanding Voltage AC1,000V(r.m.s.) ／ 1 minute Insulation Resistance Return Loss Operating Temperature 1,000M Ω Min. at 500V DC Material ／ Finish Copper Alloy / Au Plating Outer Contact Copper Alloy / Ni plating Insulator PTFE 20dB Min.( ～ 3GHz) 10dB Min.( ～ 12GHz) -40 ～ +85℃ ※ Specifications may vary depending on the connector. Please check the specifications before use. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp ４ BNC75-LBR-PC-2 BNC75 Series for 12G-SDI Unit：mm ○ Angle type for PCB (Manual mounting) ■ BNC75-LBR-PC-2 （Middle mount type） Hex nut Spring washer 16.2 Ø16 0.25 3.3 7 13.5 15 3.1 6.3 14 HEX 1/2-28UNEF-2A 16 Ø0.5 30.6 Width across flats：11.1 .8 +0 0 .2 4-□1.2 Ø0.7 9.8 9.8 Ø 12 4-Ø2.2 11.3 8.8 8.8 +0.2 0 Panel mounting dimensions (t=2 Max.) PCB mounting dimensions (t=2.6 Max.) ■ BNC75-LR1-PC （Middle mount type） (15.2) 14.5 5.7 9.5 BNC75-BR-PCE 7 2.5 M2.6×0.25 0.25 (28.8) 1.5 (9) Ø16 7 4-Ø1.6 8 Ø0.7 1.5 3.7 7.4 +0 0 .2 7 6.5 3 3.5 1/2-28UNEF-2A 7 14 HEX 2.8 ° 3.5 2.6 ±0.1 2. Ø 20 7 6.5 16.2 6.3 Ø16 1 Ø0.5 7 1 Hex nut Ø1 18.5 10.6 (25) 1.4 Ø1 2.8 Spring washer b .2 4-□1 11 e th 11 on si en m di e ding :2.4 ut O otru face Pr d en om fr Ø er et am i rd c of 5 0. t:φ ody ac t on 20° 4.75 2.8 11.25 10.4 3.7 7.4 End face of PCB MAX. 2.6 Panel mounting dimensions (t=2 Max.) PCB mounting dimensions (t=2 Max) 11.3 +0.2 0 Panel mounting dimensions (t=2.4) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp ５ BNC75-BR-PCE BNC75 Series for 12G-SDI Unit：mm ○ Angle type for PCB (Manual mounting) ■ BNC75-BR-PCE （Edge mount type） o er et am i rd c of on si en m ro e th bo Spring washer Hex nut f 16.2 Ø16 2.6 ±0.1 1 Ø16 1 m di g e in .4 ut trud ce:2 O o fa Pr d en 5 0. :φ dy ct a nt 14 HEX 7 3 1.5 Ø1 7 +0 0 .2 1/2-28UNEF-2A 6.5 18.5 (25) 11.3 +0.2 0 Panel mounting dimensions (t=2.4) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 6 BNC75 Series for 12G-SDI Unit：mm ○ Straight type for PCB (Manual mounting) RoHS Compliant Compliant OUTLINE ◆ High performance connector of straight type for PCB. ◆ Various variations are possible, because it is produced by machining. APPLICATIONS Broadcast equipment (Switcher, Professional video camera, Monitor) FEATURES ◆ Excellent high-frequency characteristics（12G-SDI compliant） 【High-frequency characteristic】 Return Loss（BNC75-SR-PC） 0 5 10 15 20 25 30 35 40 45 50 Return Loss 〔dB〕 Return Loss 〔dB〕 【High-frequency characteristic】 12G-SDI spec BNC75-SR-PC 0 2 4 6 8 Frequency 〔GHz〕 10 75 Ω Frequency Range 12GHz Max. Rated Voltage AC500V(r.m.s.) 2 4 6 8 Frequency 〔GHz〕 Item Contact Dielectric Withstanding Voltage AC1,000V(r.m.s.) ／ 1 minute Operating Temperature BNC75-SR-PC-3 10 12 Material / Finish Characteristic Impedance Return Loss 12G-SDI spec 0 12 SPECIFICATIONS Insulation Resistance Return Loss（BNC75-SR-PC-3） 0 5 10 15 20 25 30 35 40 45 50 1,000M Ω Min. at 500V DC Material ／ Finish Copper Alloy / Au Plating Outer Contact Copper Alloy / Ni plating Insulator PTFE 20dB Min.( ～ 3GHz) 10dB Min.( ～ 12GHz) -40 ～ +85℃ ※ Specifications may vary depending on the connector. Please check the specifications before use. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 7 BNC75-SR-PC BNC75-SR-PC BNC75 Series for 12G-SDI Unit：mm ○ Straight type for PCB (Manual mounting) ■ BNC75-SR-PC （Outer contact: 3 pins） 1 8 0. □ 3- Ø0.5 Ø1 1 Ø1 0.25 3.8 8 0. □ 3- Ø0.5 4.5 13.5 Ø0.7 0.25 4.5 6.22 3.8 13.5 3.11 (18) 3-Ø1.25 (18) 3.11 6.22 3.11 Ø0.7 6.22 3-Ø1.25 PCB mounting dimensions (t=2.6 Max.) 3.11 6.22 PCB mounting dimensions (t=2.6 Max.) BNC75-SR-PC-3 BNC75-SR-PC-3 ■ BNC75-SR-PC-3 （Outer contact: 4 pins） □6.44 Ø11.94 Ø0.4 0.25 Ø11.94 4-□0.91 0.25 5.59 Ø0.4 4-5.53 4-5.53 4-□0.91 15.36 6.44 20.95 2.01 3.22 5.59 15.36 6.44 20.95 3.22 PTH：4-Ø1.5 PCB mounting dimensions (t=1.6 Max.) 6.44 22.96 PTH：Ø0.5 3.22 2.01 PTH：4-Ø1.5 3.22 □6.44 6.44 22.96 PTH：Ø0.5 PCB mounting dimensions (t=1.6 Max.) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 8