GOOD-ARK DFL1006J Surface mount glass passivated single-phase bridge rectifier Datasheet

DFL1002J thru DFL1010J
Surface Mount Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 200~1000V Output Current 1.0A
Features
•
•
•
•
•
•
Glass passivated Bridge Rectifiers
Ideal for automated placement
Very low profile - typical body height 1.5 mm
High surge current capability
Moisture sensitivity: level 1, per J-STD-020
High temperature soldering guaranteed: 260℃/10 seconds
DFL J
Mechanical Data
• Case:DFL,Molding compound meets UL 94V-0 flammability rating
Typical Applications
General purpose use in ac-to dc bridge full wave rectification for
SMPS,lighting,adapter,charger,home appliances,office equipment,and telecommunication
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
DFL1002J
DFL1006J
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified output current
VRRM
VRMS
VDC
Io(AV)
200
600
800
1000
V
140
420
560
700
V
200
600
800
1000
V
Peak forward surge current 8.3 ms single half sinewave superimposed on rated load
Rating for fusing (t≤8.3ms)
Operating junction and storage temperature range
Electrical Characteristics
Parameter
Test Conditions
4.0 V, 1 MHz
Thermal Characteristics
1.0
A
IFSM
40
A
I2 t
TJ, TSTG
6.7
A2s
- 55 to + 150
°C
(TA = 25 °C unless otherwise noted)
Maximum instantaneous forward IF=0.5A,Ta=25℃
voltage
IF=1.0A,Ta=25℃
Maximum DC reverse current at Ta=25℃
rated DC blocking voltage
Ta=125℃
IF=0.5A,IR=1.0A,
Typical reverse recovery time
Irr=0.25A
Typical junction capacitance
DFL1008J DFL1010J Unit
Symbol
DFL1002J
DFL1006J
DFL1008J DFL1010J Unit
1.0
VF
Volts
1.1
5
IR
µA
50
trr
2
uS
CJ
10.5
pF
(TA=25℃ unless otherwise noted)
Parameter
Test Conditions
Typical thermal resistance1)
juntion to ambient
juntion to case
Symbol
RθJA
RθJC
DFL1002J
DFL1006J
DFL1008J DFL1010J Unit
29
℃/W
9
Note: 1) The thermal resistance from junction to ambient and case,mounted on P.C.B with 13×13mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2017.04-Rev.A
DFL1002J thru DFL1010J
Surface Mount Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 200~1000V Output Current 1.0A
Ratings and Characteristics Curves
Peak Forward Surge Current
(A)
Bridge Output Full Wave
Rectified Current, (A)
(TA = 25℃ unless otherwise noted)
1.25
1
0.75
0.5
0.25
60
40
20
0
0
0
1
25 50 75 100 125 150
Case temperature(℃)
10
Number of Cycles at 60Hz
100
Figure 2.Maximum Non-Repetitive Peak
Forward Surge Current
Figure 1.Forward Current Derating Curve
100
100
Junction Capacitance (pF)
Instantaneous Forward
Current (A)
Ta=25℃
8.3ms single half
sine-wave
10
1
25℃
0.1
85℃
125℃
150℃
0.01
0
0.4
0.8
1.2
1.6
2
10
Tj=25℃
f=1.0MHZ
Vsig=50mVp-p
1
2.4
0.1
Instantaneous Forward Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
1
Reverse Voltage (V)
10
Figure 4. Typical Junction Capacitance
Instantaneous Reverse
Current (uA)
10000
1000
25℃
85℃
125℃
150℃
100
10
1
0.1
0.01
0.001
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Figure 5. Typical Reverse Characteristics
www.goodark.com
2/4
2017.04-Rev.A
DFL1002J thru DFL1010J
Surface Mount Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 200~1000V Output Current 1.0A
Package Outline Dimensions
DFLJ
DFL G
Dim
A
A1
B
C
D
E
HE
L
P
DFL J
Min
1.40
0.10
1.02
0.22
8.00
7.10
8.00
1.02
5.00
unit:mm
Max
1.60
0.25
1.20
0.33
8.30
7.40
8.50
1.52
5.20
Dim
A
A1
B
C
D
E
HE
L
P
Min
0.055
0.004
0.040
0.009
0.315
0.280
0.315
0.040
0.197
unit:inch
Max
0.063
0.010
0.047
0.013
0.327
0.291
0.335
0.060
0.205
Dim
A
A1
B
C
D
E
HE
L
P
Min
1.40
0.05
1.02
0.22
8.00
7.10
9.70
0.75
5.00
unit:mm
Max
1.60
0.20
1.20
0.33
8.30
7.40
10.20
1.25
5.20
Dim
A
A1
B
C
D
E
HE
L
P
Min
0.055
0.002
0.040
0.009
0.315
0.280
0.382
0.030
0.197
unit:inch
Max
0.063
0.008
0.047
0.013
0.327
0.291
0.402
0.049
0.205
Footprint
www.goodark.com
3/4
2017.04-Rev.A
DFL1002J thru DFL1010J
Surface Mount Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 200~1000V Output Current 1.0A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Goo-Ark product best suited to the customer’s application; they do not convey any license under
any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co.,
Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement
of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs
and algorithms represents information on products at the time of publication of these materials,
and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product
improvements or other reasons. It is therefore recommended that customers contact Suzhou
Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the
latest product information before purchasing a product listed herein. The information described
here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics
Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these
inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark
Electronics Co., Ltd. by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Suzhou
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss
resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or
reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further
details on these materials or the products contained herein.
www.goodark.com
4/4
2017.04-Rev.A
Similar pages