API M26T Triple balanced mixer Datasheet

Triple Balanced Mixer
Model M26T
RF 1.0 to 3400 MHz
RF Band
Electrical Specifications
:
(1)
Conditions
Parameter
SSB Conversion loss:
Isolation
LO to RF:
(2)(3)
1.0-1500
1.0-3400
1.0-1500
1.0-3400
LO to IF:
RF to IF:
Input 1-dB
Compression Point:
Input Third Order
Intercept Point:
LO Power:
(4)
Specifications
RF (MHz) LO (MHz) IF (MHz)
1.0-1500
1.0-1000
1.0-1500
1.0-3400
1.0-2000
1.0-3400
Min
30
25
30
25
1.0-3400
dB
dB
dB
dB
Typical
7.5 dB
8.5 dB
38
35
35
32
30
dB
dB
dB
dB
dB
1.0-3400
1.0-3400
1.0-2000
+3 dBm
1.0-3400
1.0-3400
1.0-2000
+15 dBm
1.0-3400
1.0-3400
1.0-2000
+13 dBm
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz.
3. Conversion loss typically degrades less than ±0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C.
4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
M26T
Max
9.5 dB
10.5 dB
Typical
Performance
at 25˚C
Outline: A
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001
REV A
6/18/09
Similar pages