API MC137MS-26 Double balanced mixer Datasheet

Model MC137MS-26
Double Balanced Mixer
Communications Band
Electrical Specifications
RF 12.0 to 18.0 GHz
:
(1)
Specifications
Conditions
RF (GHz)
17.0-24.0
17.0-24.0
Parameter
SSB Conversion
loss:(2) (3)
Isolation
LO to RF:
LO to IF:
RF to IF:
Input 1 dB
Compression Point:
Input Third Order
Intercept Point:
LO Power: (4)
LO (GHz)
15.0-26.0
15.0-26.0
IF (MHz)
DC-2000
DC-4000
Min
Typical
7.5 dB
8.5 dB
15.0-26.0
DC-4000
38 dB
30 dB
40 dB
+3 dBm
17.0-24.0
15.0-26.0
DC-4000
+13 dBm
17.0-24.0
15.0-26.0
DC-4000
+17 dBm
17.0-24.0
17.0-24.0
15.0-26.0
15.0-26.0
Max
9.5 dB
10.5 dB
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz.
3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C.
4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
5. See Application note M112, for aid in selecting the outline and for mounting and installation information.
MC137MS-26
Outline: MS3AL
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532
Rev.
4/27/07
www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001
Similar pages