Coilcraft MSS7348-684MEC Shielded power inductor Datasheet

Document 879-1
Shielded Power Inductors – MSS7348
•
•
•
•
Very low DCR – as low as 0.015 Ohms
Current handling as high as 5.7 A
Magnetically shielded
Wide range of inductance values available
Core material Ferrite
Terminations RoHS compliant matte tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight 0.58 – 0.72 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 250/7″ reel; 1000/13″ reel; Plastic tape: 16 mm wide,
0.4 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part number1
MSS7348-332ME_
MSS7348-472ME_
MSS7348-682ME_
MSS7348-103ME_
MSS7348-153ME_
MSS7348-223ME_
MSS7348-333ME_
MSS7348-473ME_
MSS7348-683ME_
MSS7348-104ME_
MSS7348-154ME_
MSS7348-224ME_
MSS7348-334ME_
MSS7348-474ME_
MSS7348-684ME_
MSS7348-105ME_
Inductance2
±20% (µH)
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
DCR (Ohms)
typ max
0.015
0.018
0.024
0.029
0.029
0.035
0.038
0.045
0.047
0.056
0.067
0.080
0.106
0.120
0.132
0.150
0.196
0.225
0.297
0.320
0.461
0.520
0.586
0.624
0.886
0.980
1.28
1.38
1.64
1.82
2.50
2.73
SRF typ3
(MHz)
131
87
43
27
23
18
13
12
8.1
7.0
5.6
4.8
3.7
3.1
2.6
2.2
1. When ordering, please specify termination and packaging codes:
MSS7348-105MEC
Termination: L = RoHS compliant matte tin over nickel over phos
bronze
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (250 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (1000 parts per
full reel).
Isat (A)4
10% drop 20% drop 30% drop
4.3
5.2
5.7
3.2
3.8
4.2
2.8
3.3
3.6
2.2
2.6
2.9
1.7
2.1
2.4
1.5
1.8
2.0
1.2
1.6
1.7
1.0
1.2
1.4
0.83
1.0
1.1
0.71
0.84
0.92
0.58
0.68
0.75
0.50
0.58
0.64
0.39
0.46
0.51
0.35
0.41
0.45
0.28
0.32
0.36
0.22
0.27
0.29
Irms (A)5
20°C rise 40°C rise
3.2
4.4
2.5
3.4
2.3
3.1
2.2
3.0
2.0
2.7
1.7
2.3
1.3
1.7
1.2
1.6
0.94
1.2
0.77
1.0
0.63
0.84
0.55
0.74
0.44
0.60
0.37
0.50
0.32
0.42
0.26
0.35
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD‑A
fixture in an Agilent/HP 4263B LCR meter.
3. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD­‑D test fixture.
4. DC current at which the inductance drops the specified amount from its
value without current.
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 879-1
Revised 06/12/13
Document 879-2
Shielded Power Inductors – MSS7348
Typical L vs Frequency
Typical L vs Current
10000
10000
1000 µH
1000 µH
1000
330 µH
Inductance (µH)
Inductance (µH)
1000
100 µH
100
33 µH
10 µH
10
330 µH
100 µH
100
33 µH
10 µH
10
3.3 µH
3.3 µH
1
0.1
1
10
100
1
0.01
1
0.1
Frequency (MHz)
10
Current (A)
XXX
Irms Derating
0.276 ±0.012
7,0 ±0,3
Dash
number
0.276 ±0.012
7,0 ±0,3
0.189
max
4,8
0.049
1,25
0.177
4,5
Recommended
Land Pattern
0.079
2,0
0.087
2,2
0.063
1,6
Dimensions are in
0.173
4,4
inches
mm
Document 879-2
Revised 05/21/13
Similar pages