Technical Data10488 Effective February 2016 Class J modular ferrule and knifeblade fuse blocks Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with up to four mounting holes per pole increase installation flexibility. All knifeblade blocks meet UL creep and clearance requirements for Industrial Power Circuits (UL 508 and UL 845). Additionally, the 200 to 600 amp blocks meet the higher UL creep and clearance requirements for Power Distribution Standards (UL 98, UL 67, UL 489, UL 891 and UL 869A) All blocks have optional IP20 finger-safe high clarity, see-through covers for inspecting wire terminations or thermography measurements without removal. All covers enhance safety by featuring probe holes for easier, safer testing and a lockout/tagout capability. These covers also have optional open fuse indication to speed troubleshooting. Easy circuit identification is available for 30 and 60 amp blocks and covers with universal marker labels. Catalog symbol: • JM60_ Description: Bussmann® series Class J modular fuse blocks increase versatility, reduce labor and enhance safety for any panel or electrical system design. Available for the full Class J fuse amp range. Specifications: Ratings • Volts 600V • Amps up to 600 • Withstand 200kA RMS Sym Agency information • These fuse blocks feature a standard fuse clip reinforcing spring for enhanced electrical contact between the blcok and fuse. All blocks are available as single-pole versions that snap together for the required number of poles, or as factory configured 2-, and 3-pole versions to meet stocking requirements. The modular design permits reducing inventory, assembly time and labor with tool-less assembly of multiple poles at point of use. Ferrule fuse blocks up to 60 amps save panel space with the smallest width dimension on the market and feature DIN-Rail and panel mount versatility so that one product can be used for multiple applications with lower inventory cost. • Blocks: • UL® Listed E14853 — IZLT and IZLT7 • CSA® Certified 47235-6225-01 • CE • RoHS Compliant • REACH declaration available upon request Covers: • UL Listed E58836 - JDVS • CSA Certified 47235-6225-01 (30 and 60A) • RoHS Compliant • REACH declaration available upon request Technical Data 10488 Class J modular ferrule and knifeblade fuse blocks Effective February 2016 Poles • 1-, 2-, 3-pole units factory assembled • Single-pole units snap together to create desired number of poles Flammability ratings • Blocks: UL 94V0, self-extinguishing • Covers: UL 94HB, self-extinguishing Optional see-through covers provide IP20 finger-safe protection and feature a lockout/tagout provision to improve electrical safety. These covers are also available with open fuse indicating version for faster troubleshooting. Order separately, one cover per block pole. Operating and storage temperature range • Blocks -40°C to +120°C • Covers; • Non-Indicating -40°C to +120°C • Indicating -20°C to +90°C* * Indication requires minimum 90V and closed circuit to illuminate. Materials • Base: Thermoplastic • Terminals: • • Tin-plated copper brass (30 and 60A) • Tin-plated aluminum (box lug) Covers: Thermoplastic Conductors • See catalog numbers for details and torque specifications. Standard dual lugs on 600A blocks and optional dual lugs on 400A blocks for easier wiring using two, smaller conductors. Modular Class J ferrule and knifeblade fuse blocks 30 and 60 amp ferrule fuse blocks have DIN-rail and panel mounting capability, the modular designs allows blocks toand snap together for the desired number of poles. They accept optional snap-on covers for IP20 finger-safe protection and feature a lockout/tagout to improve electrical safety. On blocks rated from 100 to 600A, the optional covers can be completely removed for servicing or simply hinged open. 100 to 600 amp knifeblade fuse blocks are panel mount with multiple holes for installation flexibility and the modular design allows blocks to snap together for the desired number of poles. They accept optional snap-on covers for IP20 finger-safe protection and feature a lockout/tagout provision to improve electrical safety. 2 Eaton.com/bussmannseries Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Table 1: 30 and 60 amp block catalog numbers Fuse amp range Terminal type Poles Box lug/slot screw 1 JM60030-1CR Box lug/hex screw JM60030-1CHR #10-32 Phil-slot screw Pressure plate JM60030-1SR JM60030-1PR up to 30 2 JM60030-2CR JM60030-2CHR JM60030-2SR JM60030-2PR 3 JM60030-3CR JM60030-3CHR JM60030-3SR JM60030-3PR — — 35 to 60 1 JM60060-1CR JM60060-1CHR 2 3 JM60060-2CR JM60060-3CR JM60060-2CHR JM60060-3CHR Optional covers* Indicating** Non-indicating CVRI-J-60030 CVR-J-60030 CVRI-J-60060 CVR-J-60060 * Covers sold separately, one cover per pole. ** Open fuse indication requires 90 volts minimum and closed circuit to operate. Table 2: 30 and 60 amp block terminals and conductors Terminal type AWG type/range Box lug 75°C Cu 2-14, AL 2-8 #10-32 Phil-slot screw 75/90°C Cu 10-18 AWG 2-3 4-6 8 10-14 Torque N•m (lb-in) 5.6 (50) 5.1 (45) 4.5 (40) 4.0 (35) 10-18 2.3 (20) Pressure plate Recommended Bussmann series fuses: Description Ultimate protection Low-Peak® LPJ timedelay fuses Advanced protection Limitron™ JKS fastacting fuses Description Marker labels Standard phase barriers for additional safety Data sheet no. up to 60 1006 up to 600 1026 Recommended accessories for 30 and 60 amp blocks: DIN-Rail end stops Finger grips on cover for easy removal Amps Catalog no. BRKT-ND BRKT-NDSCREW2 TM26CB Marker label provision for easy circuit dientification Optional see-through, snap-on cover for easy visual inspection Optional open fuse indication speeds troubleshooting Vent slots improve cooling* Toolless interlocking modular design for easy point-of-use assembly Lockout/tagout feature improves safety DIN-rail or panel mounting on each pole provides installation flexibility Probe holes for easy testing without removing cover *No fuse derating necessary. Eaton.com/bussmannseries 3 Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Dimensions; 30A Class J block - in (mm) 55 2.2 28 1.1 JM60030-1CR R3 .1 87 12 3.4 .5 PROVISION FOR MARKING LABEL 46 1.8 17 .7 JM60030-2CR 28 1.1 29 1.1 56 2.2 58 2.3 83 3.3 PROVISION FOR MARKING LABEL 110 4.3 JM60030-3CR 84 3.3 CVR-J-60030 (NON INDICATING) CVRI-J-60030 (WITH INDICATION) LOCKOUT TAGOUT RINGS JM60030-1CR SHOWN WITH COVER 4 Eaton.com/bussmannseries Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Dimensions; 60A Class J block - in (mm) 39 1.5 7 .3 76 3.0 R3 .1 JM60060-1CR 94 3.7 38 1.5 38 1.5 PROVISION FOR MARKER LABEL 53 2.1 JM60060-2CR 5 .2 18 .7 18 .7 114 4.5 75 3.0 65 2.6 PROVISION FOR MARKER LABEL PROVISION FOR MARKER LABEL 119 4.7 JM60060-3CR 113 4.5 CVR-J-60060 (NON INDICATING) CVRI-J-60060 (WITH INDICATION) LOCKOUT TAGOUT RINGS JM60060-1CR SHOWN WITH COVER Eaton.com/bussmannseries 5 Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Installing/removing covers For larger conductors, trim center tab at notch as show in detail A. Install cover: Position cover over block and push straight down until it snaps/clicks into place. Trim tab here A Open cover: Using both outside handles, pull straight up. Detail A Installing blocks on DIN-Rail Place one edge of DIN-Rail in fuse block base, then rotate block down until it clicks into place. 6 Eaton.com/bussmannseries Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Table 6: Class J 100 to 600 amp knifeblade blocks and covers Fuse amp range 70-100 110-200 225-400 450-600 Covers* Poles Catalog nos. 1 JM60100-1CR 2 JM60100-2CR Conductors*** Indicating** CVR-J-60100 Non-indicating Solid and stranded CVRI-J-60100 Fine stranded Torque N•m (lb-in) — Cu 1-3 AWG 6.2 (55) 1/0-3 AWG; (2) Cu 4-6 AWG Cu 4-6 AWG 5.6 (50) 2 4-6 AWG; (2) Cu 8 AWG Cu 8 AWG 5.1 (45) 8 AWG; (2) Cu 10-14 AWG — 4.5 (40) 3 JM60100-3CR Cu 10-14 AWG; Al 10-12 AWG — 4.0 (35) 1 JM60200-1CR 250kcmil-1 AWG Cu 3/0-1 AWG 42 (375) 2 JM60200-2CR 3 JM60200-3CR 2-6 AWG; (2) Cu 2-6 AWG Cu 2-6 AWG 31 (275) 1 JM60400-1CR 2 JM60400-2CR 3 JM60400-3CR 1 JM60400-1MW22 2 JM60400-2MW22 3 JM60400-3MW22 1 JM60600-1CR 2 JM60600-2CR 3 JM60600-3CR CVR-J-60200 CVRI-J-60200 600kcmil 57 (500) 500kcmil-4 AWG CVR-J-60400 CVRI-J-60400 51 (450) N/A (2) Cu 3/0 - 4 AWG (2) Al 3/0 - 4 AWG CVR-J-60600 CVRI-RH-60600 * Covers sold separately. ** Open fuse indication requires 90 volts minimum and closed circuit to operate. *** Ratings for copper and aluminum conductors except where otherwise noted. 34 (300) 2 (2) 500kcmil-4 AWG N/A 51 (450) Recommended Bussmann series fuses: Description Ultimate protection Low-Peak® LPJ timedelay fuses Advanced protection Limitron™ JKS fastacting fuses Probe holes for easy testing without removing cover 57 (500) Optional see-through, snap-on cover for easy visual inspection Amps Data sheet no. 70 to 600 1007 up to 600 1026 Optional open fuse indication speeds troubleshooting Lockout/tagout feature improves safety Finger grips on cover for easy removal Vent slots improve cooling* Standard phase barriers for additional safety Finger-safe wire entry with cutout tabs for larger wires on all versions Multiple mounting holes for each pole provide flexible, secure mounting Toolless interlocking modular design for easy point-of-use assembly *No fuse derating necessary. Standard dual lugs on 600A blocks and optional dual lugs on 400A blocks for easier wiring using two, smaller conductors. Eaton.com/bussmannseries 7 Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Dimensions; 100A Class J block - in (mm) 53 2.1 51 2.0 104 4.1 102 4.0 22 TYP .9 JM60100-1CR 1 TYP .04 29 TYP 1.1 8 TYP .3 71 2.8 29 TYP 1.1 138 TYP 5.4 JM60100-2CR 13 TYP .5 ALLEN KEY 9/32" TYP 77 3.0 55 TYP 2.2 35 TYP 1.4 51 TYP 2.0 37 TYP 1.5 155 6.1 JM60100-3CR 153 6.0 CVR-J-60100-M (NON INDICATING) CVRI-J-60100-M (WITH INDICATION) 152 6.0 REMOVE FOR WIRE LARGER THAN 6 AWG JM60100-1CR (SHOWN WITH COVER) 8 Eaton.com/bussmannseries Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Dimensions; 200A Class J block - in (mm) 69 TYP 2.7 67 TYP 2.6 136 5.4 134 5.3 35 TYP 1.4 8 TYP .3 32 TYP 1.2 172 TYP 6.8 81 TYP 32 TYP 3.2 1.3 9 TYP .3 19 TYP .8 JM60200-1CR JM60200-2CR ALLEN KEY 3/8" TYP. 97 TYP 3.8 75 TYP 3.0 45 TYP 1.8 67 TYP 2.6 46 TYP 1.8 203 8.0 200 7.9 JM60200-3CR 186 7.3 CVR-J-60200-M (COVER NON-INDICATING) CVRI-J-60200-M (COVER WITH INDICATION) REMOVE FOR WIRES LARGER THAN 2 AWG JM60200-1CR (SHOWN WITH COVER) Eaton.com/bussmannseries 9 Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Dimensions; 400A Class J block - in (mm) 91 TYP 3.6 88 TYP 3.5 50 TYP 2.0 179 7.1 38 TYP 1.5 8 TYP .3 41 TYP 1.6 9 TYP .3 201 TYP 7.9 JM60400-1CR 176 6.9 19 TYP .8 90 TYP 3.5 JM60400-2CR ALLEN KEY 1/2" TYP 27 TYP 1.1 125 TYP 4.9 67 TYP 2.6 44 TYP 1.7 JM60400-1MW22 JM60400-3CR 104 TYP 4.1 88 TYP 3.5 88 TYP 3.5 67 TYP 2.6 268 10.5 JM60400-2MW22 265 10.4 216 8.5 CVR-J-60400-M (COVER NON-INDICATING) CVRI-J-60400-M (COVER WITH INDICATION) REMOVE ONLY FOR DUAL LUG JM60400-1CR (SHOWN WITH COVER) 10 Eaton.com/bussmannseries REMOVE FOR WIRES LARGER THAN 250KCMIL Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 Dimensions; 600A Class J block - in (mm) 123 TYP 4.8 120 TYP 4.7 ALLEN KEY 3/8" TYP 71 TYP 2.8 244 9.6 241 9.5 8 TYP .3 51 TYP 2.0 52 TYP 2.1 JM60600-1CR 9 TYP .3 234 TYP 100 TYP 9.2 3.9 JM60600-2CR 19 TYP .8 151 TYP 5.9 134 TYP 5.3 43 TYP 1.7 73 TYP 2.9 121 TYP 4.8 29 TYP 1.1 363 14.3 365 14.4 253 10.0 JM60600-3CR CVR-JM60600 (COVER NON-INDICATING) CVRI-JM60600 (COVER WITH INDICATION) REMOVE FOR WIRE LARGER THAN 250KCMIL JM60600-1CR (SHOWN WITH COVER) Eaton.com/bussmannseries 11 Class J modular ferrule and knifeblade fuse blocks Technical Data 10488 Effective February 2016 The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 Eaton.com For Eaton’s Bussmann series product information, call 1-855-287-7626 or visit: Eaton.com/bussmannseries Bussmann Division 114 Old State Road Ellisville, MO 63021 United States Eaton.com/bussmannseries © 2016 Eaton All Rights Reserved Printed in USA Publication No. 10488 — BU-MC16XXX February 2016 Eaton and Bussmann are valuable trademarks of Eaton in the U.S. and other countries. You are not permitted to use the Eaton trademarks without prior written consent of Eaton. Follow us on social media to get the latest product and support information.