Lumileds L1C1-DRD1000000000 Multiple colors, a single focal length Datasheet

Illumination
LUXEON C Color Line
Multiple colors, a single focal length
The LUXEON C Color Line is an optically advanced portfolio of Color and
White LEDs. Designed for flawless color mixing, LUXEON C Color Line
has one focal length for all colors, which provides consistent radiation
patterns from secondary optics and maximizes optical efficiency. With
low dome design, it keeps effective source size small while still improving
light extraction. Designed for smooth color mixing and maximum punch,
LUXEON C Color Line is the optimal LED solution for architecture,
entertainment and emergency vehicle lighting applications.
Features and Benefits
Primary Applications
One focal length allows flawless color mixing, maximum optical efficiency
and removes halos
Architectural & Entertainment
Low dome design eliminates trade-offs between flux and source size
Lamps
Hot tested—removes guesswork for designers
Industry’s lowest thermal resistance means greater light output
and lower heatsink costs
Small symmetrical 2x2mm² package enables dense packing and
limits the impact of rotation during reflow
DS144 LUXEON C Color Line Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved.
–– Color Tunable
Specialty Lighting
–– Emergency Vehicle
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Dominant Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON C LEDs are tested and binned with a DC drive current of 350mA at a junction temperature, Tj, of 85ºC.
Part Number Nomenclature
Part numbers for LUXEON C Colors follow the convention below:
L 1 C 1 – A A A 1 0 0 0 0 0 0 0 0 0
Where:
A A A
– designates color (FRD=Far Red, DRD=Deep Red, RED=Red, RNG=Red-Orange, AMB=Amber,
PCA=PC Amber, MNT=Mint, LME=Lime, GRN=Green, CYN=Cyan, BLU=Blue, RYL=Royal Blue)
Therefore, the following part number is used for a LUXEON C Red:
L 1 C 1 – R E D 1 0 0 0 0 0 0 0 0 0
Part numbers for LUXEON C White follow the convention below:
L 1 C 1 – A A B B 0 0 0 0 0 0 0 0 0
Where:
A A
– designates nominal CCT (27= 2700K, 30=3000K, 40=4000K, 50=5000K, 57=5700K, 65=6500K)
B B
– designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI)
Therefore, the following part number is used for LUXEON C White at 4000K 70CRI:
L 1 C 1 – 4 0 7 0 0 0 0 0 0 0 0 0 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON C is
compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1a. Product performance of LUXEON C Colors at 350mA, Tj=85ºC.
Color
DOMINANT or
PEAK WAVELENGTH [1] (nm)
Luminous Flux (lm) or
Radiometric Power [2] (mW)
Part
Number
MINIMUM
MAXIMUM
MINIMUM
TYPICAL
Far Red
720
750
190
230
L1C1-FRD1000000000
Deep Red
655
675
280
315
L1C1-DRD1000000000
Red
624
634
35
49
L1C1-RED1000000000
Red-Orange
614
624
45
60
L1C1-RNG1000000000
Amber
585
600
20
30
L1C1-AMB1000000000
PC Amber
–
–
80
94
L1C1-PCA1000000000
Mint
–
–
140
152
L1C1-MNT1000000000
Lime
–
–
125
135
L1C1-LME1000000000
Green
520
540
90
115
L1C1-GRN1000000000
Cyan
490
510
65
90
L1C1-CYN1000000000
Blue
465
485
25
41
L1C1-BLU1000000000
Royal Blue
440
460
480
532
L1C1-RYL1000000000
Notes for Table 1a:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. PC Amber, Mint and Lime are binned by chromaticity coordinates. Far Red, Deep Red and Royal Blue are binned by
peak wavelength. All other colors are binned by dominant wavelength.
2. Far Red, Deep Red and Royal Blue are binned by radiometric power. All other colors are binned by luminous flux.
Table 1b. Product performance of LUXEON C White at 350mA, Tj=85°C.
TYPICAL
TYPICAL
LUMINOUS EFFICACY
(lm/W)
Part
Number
116
121
L1C1-4070000000000
100
117
122
L1C1-5070000000000
70
100
118
124
L1C1-5770000000000
70
100
119
124
L1C1-6570000000000
Luminous Flux (lm)
NOMINAL
CCT
MINIMUM
CRI
MINIMUM
4000K
70
100
5000K
70
5700K
6500K
2700K
80
90
94
98
L1C1-2780000000000
3000K
80
90
102
106
L1C1-3080000000000
4000K
80
100
113
117
L1C1-4080000000000
5700K
90
80
93
94
L1C1-5790000000000
Notes for Table 1b:
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2a. Optical characteristics for LUXEON C Colors at 350mA, Tj=85°C.
COLOR
Part
Number
Typical Spectral
Half-width [1]
(nm)
Typical Temperature
Coefficient of Dominant
or Peak Wavelength
(nm/°C)
Typical Total
Included
Angle [2]
Typical
Viewing
Angle [3]
Far Red
L1C1-FRD1000000000
20
0.06
175°
162°
Deep Red
L1C1-DRD1000000000
20
0.06
175°
162°
Red
L1C1-RED1000000000
20
0.06
175°
162°
Red-Orange
L1C1-RNG1000000000
20
0.06
175°
162°
Amber
L1C1-AMB1000000000
20
0.06
175°
162°
PC Amber
L1C1-PCA1000000000
80
-0.01
175°
150°
Mint
L1C1-MNT1000000000
80
-0.01
175°
150°
Lime
L1C1-LME1000000000
80
-0.01
175°
145°
Green
L1C1-GRN1000000000
30
0.04
175°
170°
Cyan
L1C1-CYN1000000000
30
0.03
175°
170°
Blue
L1C1-BLU1000000000
20
0.03
175°
170°
Royal Blue
L1C1-RYL1000000000
20
0.03
175°
165°
Notes for Table 2a:
1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Table 2b. Optical characteristics for LUXEON C White at 350mA, Tj=85°C.
Part Number
Typical Total Included Angle [2]
Typical Viewing Angle [3]
L1C1-xxx0000000000
170°
150°
Notes for Table 2b:
1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON C Color Line at 350mA, Tj=85ºC.
COLOR
Part Number
Forward Voltage [1] (Vf)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
Typical Thermal
RESISTANCE—JUNCTION
to Solder Pad (°C/W)
Far Red
L1C1-FRD1000000000
1.50
1.73
2.30
-1.7
2.8
Deep Red
L1C1-DRD1000000000
1.50
1.95
2.30
-1.7
2.8
Red
L1C1-RED1000000000
1.75
2.00
2.50
-1.6
2.8
Red-Orange
L1C1-RNG1000000000
1.75
2.05
2.50
-1.6
2.8
Amber
L1C1-AMB1000000000
1.75
2.05
2.50
-2.0
2.8
PC Amber
L1C1-PCA1000000000
2.50
2.75
3.50
-1.7
3.0
Mint
L1C1-MNT1000000000
2.50
2.75
3.50
-2.7
2.8
Lime
L1C1-LME1000000000
2.50
2.75
3.50
-2.7
2.8
Green
L1C1-GRN1000000000
2.50
3.05
3.50
-2.4
3.5
Cyan
L1C1-CYN1000000000
2.50
3.05
3.50
-2.4
3.5
Blue
L1C1-BLU1000000000
2.50
2.84
3.50
-2.6
3.5
Royal Blue
L1C1-RYL1000000000
2.50
2.75
3.50
-1.7
2.8
White
L1C1-xxx0000000000
2.50
2.75
3.50
-1.7
2.8
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 85°C.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
4
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON C Color Line.
Parameter
DC Forward Current [1,2]
Peak Pulsed Forward Current
[1,3]
LED Junction Temperature [1] (DC & Pulse)
ESD Sensitivity
(ANSI/ESDA/JEDEC JS-001-2012)
FAR RED
AND DEEP RED
RED, RED-ORANGE,
Amber AND PC AMBER
GREEN
AND Cyan
Blue
and Royal Blue
MINT, LIME
AND WHITE
700mA
1050mA
1050mA
1050mA
1225mA
875mA
1300mA
1300mA
1300mA
1500mA
135°C
120°C
135°C
135°C
135°C
Class 3B
LED Storage Temperature
-40°C to 135°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
LUXEON C LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. At 10% duty cycle with pulse width of 10ms.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
5
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for LUXEON C Colors at 350mA, Tj=85ºC.
Figure 1b. Typical normalized power vs. wavelength for LUXEON C White at 350mA, Tj=85ºC.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
6
Light Output Characteristics
Figure 2a. Typical normalized radiant power vs. junction temperature
for LUXEON C Far Red and Deep Red at 350mA.
Figure 2b. Typical normalized light output vs. junction temperature
for LUXEON C Red, Red-Orange and Amber at 350mA.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
7
Figure 2c. Typical normalized light output vs. junction temperature for LUXEON C PC Amber at 350mA.
Figure 2d. Typical normalized light output vs. junction temperature for LUXEON C Mint and Lime at 350mA.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
8
Figure 2e. Typical normalized light output vs. junction temperature for LUXEON C Green, Cyan and Blue at 350mA.
Figure 2f. Typical normalized light output vs. junction temperature for LUXEON C Royal Blue at 350mA.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
9
Figure 2g. Typical normalized light output vs. junction temperature for LUXEON C White at 350mA.
Figure 3a. Typical normalized radiant power vs. forward current
for LUXEON C Far Red and Deep Red at Tj=85°C.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
10
Figure 3b. Typical normalized light output vs. forward current
for LUXEON C Red, Red-Orange and Amber at Tj=85°C.
Figure 3c. Typical normalized light output vs. forward current for LUXEON C PC Amber at Tj=85°C.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
11
Figure 3d. Typical normalized light output vs. forward current for LUXEON C Mint and Lime at Tj=85°C.
Figure 3e. Typical normalized light output vs. forward current for LUXEON C Green, Cyan and Blue at Tj=85°C.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
12
Figure 3f. Typical normalized light output vs. forward current for LUXEON C Royal Blue at Tj=85°C.
Figure 3g. Typical normalized light output vs. forward current for LUXEON C White at Tj=85°C.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
13
Forward Current Characteristics
Figure 4a. Typical forward current vs. forward voltage for LUXEON C Far Red, Deep Red, Red, Red-Orange and Amber at Tj=85ºC.
Figure 4b. Typical forward current vs. forward voltage for LUXEON C PC Amber at Tj=85ºC.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
14
Figure 4c. Typical forward current vs. forward voltage for LUXEON C Mint and Lime at Tj=85ºC.
Figure 4d. Typical forward current vs. forward voltage for LUXEON C Green, Cyan and Blue at Tj=85ºC.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
15
Figure 4e. Typical forward current vs. forward voltage for LUXEON C Royal Blue at Tj=85ºC.
Figure 4f. Typical forward current vs. forward voltage for LUXEON C White at Tj=85ºC.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
16
Radiation Pattern Characteristics
Figure 5a. Typical radiation pattern for LUXEON C Far Red, Deep Red, Red, Red-Orange,
Amber, PC Amber, Green, Cyan and Blue at 350mA, Tj=85ºC.
Figure 5b. Typical radiation pattern for LUXEON C Mint, Lime, Royal Blue and White at 350mA, Tj=85ºC.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
17
Figure 6a. Typical polar radiation pattern for LUXEON C Far Red, Deep Red, Red,
Red-Orange, Amber, PC Amber, Green, Cyan and Blue at 350mA, Tj=85ºC.
Figure 6b. Typical polar radiation pattern for LUXEON C Mint, Lime, Royal Blue and White at 350mA, Tj=85ºC.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
18
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux, radiometric power, color point, peak
wavelength, dominant wavelength and forward voltage.
LUXEON C Color Line LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:
A B C D
Where:
A
–
designates luminous flux or radiometric power bin (example: A=20 to 25 lumens, B= 25 to 30 lumens,
H=480 to 520mW, J=520 to 560mW)
B C –
designates color, peak or dominant wavelength bin (example: Red 40=624 to 634nm, Cyan 20=496 to 500nm,
Royal Blue 50=450 to 455nm)
D
–
designates forward voltage bin (example: A=1.7 to 1.9V, B=1.9 to 2.1V)
Therefore, a LUXEON C Red LED with a lumen range of 20 to 25, a dominant wavelength of 624 to 634nm and a forward voltage
range of 1.7 to 1.9V has the following CAT code:
A 4 0 A
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
19
Luminous Flux Bins
Table 5 lists the standard photometric luminous flux bins for LUXEON C Color Line emitters. Although several bins are outlined,
product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON C Color Line.
LUMINOUS FLUX [1] (lm)
Bin
Minimum
Maximum
A
20
25
B
25
30
C
30
35
D
35
40
E
40
45
F
45
50
G
50
55
H
55
60
J
60
65
K
65
70
75
L
70
M
75
80
N
80
90
P
90
100
Q
100
110
R
110
120
S
120
130
T
130
140
U
140
150
V
150
170
W
170
190
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
Radiometric Power Bins
Table 6. Radiometric power bin definitions for LUXEON C Far Red, Deep Red and Royal Blue.
COLOR
Far Red
Deep Red
Royal Blue
PART NUMBER
L1C1-FRD1000000000
L1C1-DRD1000000000
L1C1-RYL1000000000
Bin
RADIOMETRIC POWER [1] (mW)
Minimum
Maximum
A
190
240
B
240
280
C
280
320
D
320
360
E
360
400
C
280
320
D
320
360
E
360
400
F
400
440
G
440
480
H
480
520
J
520
560
K
560
600
L
600
640
Notes for Table 6:
1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
20
Color Bin Definitions
Note: Color bin space
illustration for 2700K,
3000K, and 3500K. For CCTs
4000K and above the ellipse
centers are all above the
blackbody line.
0.430
0.420
5B
3U
5C
0.410
3L
5A
0.400
5D
485
Color Space Definition for above and below blackbody
480
475
470
460
455
450
445
440
435
0.380
465
3-step MacAdam ellipse
5-step MacAdam ellipse
BBL
"Quadrant" lines
0.390
Figure 7. Color bin structure for LUXEON C Color Line.
Figure 8. 3- and 5-step MacAdam ellipse illustration for Table 7.
Table 7a. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON C White at 350mA, Tj = 85°C.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.7°
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.4030)
0.00834
0.00408
53.2°
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.7°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.7°
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.4030)
0.01390
0.00680
53.2°
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.01565
0.00670
53.7°
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.01370
0.00590
59.6°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.1°
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.6°
Notes for Table 7a:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
Table 7b. MacAdam ellipse color bin definitions for LUXEON C Color Line.
Bin
SDCM
30
3-step MacAdam ellipse (90CRI)
3U
3-step MacAdam ellipse (80CRI)
3L
3-step MacAdam ellipse 80CRI)
50
5-step MacAdam ellipse (70 and 90CRI)
5A
5-step MacAdam ellipse (80, 90CRI)
5B
5-step MacAdam ellipse (80, 90CRI)
5C
5-step MacAdam ellipse (80, 90CRI)
5D
5-step MacAdam ellipse (80, 90CRI)
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
21
Dominant Wavelength Bins
Table 8. Dominant wavelength bins for LUXEON C Red, Red-Orange, Amber, Green, Cyan and Blue at 350mA, Tj=85ºC.
COLOR
PART NUMBER
Bin
DOMINANT WAVELENGTH [1] (nm)
Minimum
Maximum
Red
L1C1-RED1000000000
40
624.0
634.0
Red-Orange
L1C1-RNG1000000000
20
614.0
624.0
10
585.0
590.0
Amber
L1C1-AMB1000000000
20
590.0
594.5
30
594.5
600.0
10
520.0
525.0
20
525.0
530.0
30
530.0
535.0
40
535.0
540.0
10
490.0
496.0
20
496.0
500.0
30
500.0
505.0
Green
Cyan
Blue
L1C1-GRN1000000000
L1C1-CYN1000000000
L1C1-BLU1000000000
40
505.0
510.0
10
460.0
465.0
20
465.0
470.0
30
470.0
475.0
40
475.0
480.0
50
480.0
485.0
Notes for Table 8:
1. Lumileds maintains a tolerance of ±0.5nm on dominant wavelength measurements.
Peak Wavelength Bins
Table 9. Peak wavelength bins for LUXEON C Far Red, Deep Red and Royal Blue.
COLOR
Far Red
Deep Red
Royal Blue
PART NUMBER
L1C1-FRD1000000000
L1C1-DRD1000000000
L1C1-RYL1000000000
Bin
Peak Wavelength [1] (nm)
Minimum
Maximum
10
720
730
20
730
740
30
740
750
10
655
665
20
665
675
30
440
445
40
445
450
50
450
455
60
455
460
Notes for Table 9:
1. Lumileds maintains a tolerance of ±2.0nm on peak wavelength measurements.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
22
0.59
0.57
0.44
Lime Bin 10
0.55
PC Amber
Mint Bin 22
0.53
0.51
0.43
Mint Bin 24
CIE 1931 y
0.49
y
Mint Bin 27
0.47
0.45
0.42
0.43
0.41
0.39
0.41
0.55
0.56
0.57
0.58
0.59
0.37
0.31
CIE 1931 x
0.33
0.35
0.37
0.39
0.41
0.43
x
Figure 9. Color bin structure for LUXEON C PC Amber for Table 10.
Figure 10. Color bin structure for Mint and Lime for Table 10.
Table 10. Color bin definitions for LUXEON C PC Amber, Mint and Lime.
COLOR
PC Amber
PART NUMBER
L1C1-PCA1000000000
Bin
20
22
Mint
L1C1-MNT1000000000
24
27
Lime
L1C1-LME1000000000
10
x
y
0.5622
0.4372
0.5576
0.4326
0.5775
0.4132
0.5843
0.4151
0.3972
0.4986
0.3830
0.5077
0.3703
0.4825
0.3846
0.4749
0.3846
0.4749
0.3703
0.4825
0.3608
0.4639
0.3752
0.4572
0.3752
0.4572
0.3608
0.4639
0.3515
0.4453
0.3659
0.4396
0.3819
0.5055
0.4191
0.5790
0.4327
0.5655
0.3972
0.4986
Notes for Table 10:
1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates measurements.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
23
Forward Voltage Bins
Table 11. Forward voltage bin definitions for LUXEON C Color Line.
Bin
Forward Voltage [1] (Vf)
Minimum
Maximum
Z
1.50
1.70
A
1.70
1.90
B
1.90
2.10
C
2.10
2.30
D
2.30
2.50
E
2.50
2.70
F
2.70
2.90
G
2.90
3.10
H
3.10
3.30
J
3.30
3.50
Notes for Table 11:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
24
NOTE: For internal used dimension please refer to the layer
"Spec_InternalUsedOnly" inside the electronic copy of this file.
Mechanical Dimensions
Figure 11. Mechanical dimensions for LUXEON C Color Line.
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
25
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 12. Visualization of the acceptable reflow temperature profile as specified in Table 12.
Table 12. Reflow profile characteristics for LUXEON C Color Line.
PROFILE FEATURE
Lead-Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 13. Moisture sensitivity levels for LUXEON C Color Line.
level
1
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
26
Solder Pad Design
Figure 13. Recommended PCB solder pad layout for LUXEON C Color Line.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB).
Packaging Information
Pocket Tape Dimensions
B
A
A
B
Cross section view A-A and B-B in
this drawing are not drawn to scale
in order to depict the details clearly
Figure 14. Pocket Tape dimensions for LUXEON C Color Line.
Notes for Figure 14:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
27
Reel Dimensions
Figure 15. Reel dimensions for LUXEON C Color Line.
Notes for Figure 15:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Maximum 1000 pieces per reel.
DS144 LUXEON C Color Line Product Datasheet 20180219 ©2018 Lumileds Holding B.V. All rights reserved.
28
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2018 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS144 LUXEON C Color Line
Product Datasheet 20180219
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
Similar pages