ON NGTB25N120FL2WG Igbt - field stop ii Datasheet

NGTB25N120FL2WG
IGBT - Field Stop II
This Insulated Gate Bipolar Transistor (IGBT) features a robust and
cost effective Field Stop II Trench construction, and provides superior
performance in demanding switching applications, offering both low
on state voltage and minimal switching loss. The IGBT is well suited
for UPS and solar applications. Incorporated into the device is a soft
and fast co−packaged free wheeling diode with a low forward voltage.
www.onsemi.com
Features
•
•
•
•
•
•
25 A, 1200 V
VCEsat = 2.0 V
Eoff = 0.60 mJ
Extremely Efficient Trench with Field Stop Technology
TJmax = 175°C
Soft Fast Reverse Recovery Diode
Optimized for High Speed Switching
10 ms Short Circuit Capability
These are Pb−Free Devices
C
Typical Applications
• Solar Inverter
• Uninterruptible Power Inverter Supplies (UPS)
• Welding
G
E
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector−emitter voltage
VCES
1200
V
Collector current
@ TC = 25°C
@ TC = 100°C
IC
Pulsed collector current, Tpulse
limited by TJmax
ICM
Diode forward current
@ TC = 25°C
@ TC = 100°C
IF
Diode pulsed current, Tpulse limited
by TJmax
IFM
100
A
Gate−emitter voltage
Transient gate−emitter voltage
(Tpulse = 5 ms, D < 0.10)
VGE
$20
±30
V
Power Dissipation
@ TC = 25°C
@ TC = 100°C
PD
A
50
25
G
C
100
A
E
A
50
25
MARKING DIAGRAM
25N120FL2
AYWWG
W
385
192
TSC
10
ms
Operating junction temperature
range
TJ
−55 to +175
°C
Storage temperature range
Tstg
−55 to +175
°C
Lead temperature for soldering, 1/8”
from case for 5 seconds
TSLD
260
°C
Short Circuit Withstand Time
VGE = 15 V, VCE = 500 V, TJ ≤ 150°C
TO−247
CASE 340AL
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
NGTB25N120FL2WG
© Semiconductor Components Industries, LLC, 2016
December, 2016 − Rev. 2
1
Package
Shipping
TO−247 30 Units / Rail
(Pb−Free)
Publication Order Number:
NGTB25N120FL2W/D
NGTB25N120FL2WG
THERMAL CHARACTERISTICS
Symbol
Value
Unit
Thermal resistance junction−to−case, for IGBT
Rating
RqJC
0.39
°C/W
Thermal resistance junction−to−case, for Diode
RqJC
0.59
°C/W
Thermal resistance junction−to−ambient
RqJA
40
°C/W
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
VGE = 0 V, IC = 500 mA
V(BR)CES
1200
−
−
V
VGE = 15 V, IC = 25 A
VGE = 15 V, IC = 25 A, TJ = 175°C
VCEsat
−
−
2.00
2.40
2.40
−
V
VGE = VCE, IC = 400 mA
VGE(th)
4.5
5.5
6.5
V
Collector−emitter cut−off current, gate−
emitter short−circuited
VGE = 0 V, VCE = 1200 V
VGE = 0 V, VCE = 1200 V, TJ = 175°C
ICES
−
−
−
2.5
0.4
−
mA
Gate leakage current, collector−emitter
short−circuited
VGE = 20 V , VCE = 0 V
IGES
−
−
200
nA
Cies
−
4420
−
pF
Coes
−
151
−
Cres
−
81
−
Qg
−
178
−
Qge
−
39
−
Qgc
−
83
−
td(on)
−
87
−
tr
−
28
−
td(off)
−
179
−
STATIC CHARACTERISTIC
Collector−emitter breakdown voltage,
gate−emitter short−circuited
Collector−emitter saturation voltage
Gate−emitter threshold voltage
Input capacitance
Output capacitance
VCE = 20 V, VGE = 0 V, f = 1 MHz
Reverse transfer capacitance
Gate charge total
Gate to emitter charge
VCE = 600 V, IC = 25 A, VGE = 15 V
Gate to collector charge
nC
SWITCHING CHARACTERISTIC, INDUCTIVE LOAD
Turn−on delay time
Rise time
Turn−off delay time
Fall time
TJ = 25°C
VCC = 600 V, IC = 25 A
Rg = 10 W
VGE = 0 V/ 15V
tf
−
136
−
Eon
−
1.95
−
Turn−off switching loss
Eoff
−
0.60
−
Total switching loss
Ets
−
2.55
−
Turn−on delay time
td(on)
−
84
−
Turn−on switching loss
Rise time
Turn−off delay time
Fall time
TJ = 150°C
VCC = 600 V, IC = 25 A
Rg = 10 W
VGE = 0 V/ 15V
tr
−
29
−
td(off)
−
185
−
ns
mJ
ns
tf
−
245
−
Eon
−
2.39
−
Turn−off switching loss
Eoff
−
1.26
−
Total switching loss
Ets
−
3.65
−
VGE = 0 V, IF = 25 A
VGE = 0 V, IF = 50 A, TJ = 175°C
VF
−
−
2.10
2.30
2.60
−
V
TJ = 25°C
IF = 25 A, VR = 400 V
diF/dt = 200 A/ms
trr
−
154
−
ns
Qrr
−
1.3
−
mc
Irrm
−
15
−
A
Turn−on switching loss
mJ
DIODE CHARACTERISTIC
Forward voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
2
NGTB25N120FL2WG
TYPICAL CHARACTERISTICS
100
VGE = 13 V
to 20 V
90
TJ = 25°C
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
100
80
70
11 V
60
50
10 V
40
30
9V
20
7V
10
0
8V
1
2
3
4
5
6
7
70
60
11 V
50
10 V
40
30
9V
20
8V
7V
10
0
8
1
2
3
4
5
7
6
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 1. Output Characteristics
Figure 2. Output Characteristics
8
45
100
VGE = 13 V
to 20 V
TJ = −55°C
IC, COLLECTOR CURRENT (A)
90
80
70
11 V
60
50
40
10 V
30
20
9V
10
0
8V
0
1
2
3
4
5
40
35
30
25
20
15
TJ = 150°C
10
TJ = 25°C
5
0
6
7
8
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VGE, GATE−EMITTER VOLTAGE (V)
Figure 3. Output Characteristics
Figure 4. Typical Transfer Characteristics
10,000
4.0
IC = 50 A
3.5
Cies
C, CAPACITANCE (pF)
IC, COLLECTOR CURRENT (A)
VGE = 13 V
to 20 V
80
0
0
VCE, COLLECTOR−EMITTER VOLTAGE (V)
TJ = 150°C
90
3.0
IC = 25 A
2.5
2.0
IC = 15 A
1.5
1.0
1000
Coes
100
Cres
10
TJ = 25°C
0.5
0
−75 −50 −25
0
25
50
1
75 100 125 150 175 200
0
10
20
30
40
50
60
70
80
90 100
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 5. VCE(sat) vs. TJ
Figure 6. Typical Capacitance
www.onsemi.com
3
NGTB25N120FL2WG
TYPICAL CHARACTERISTICS
16
VGE, GATE−EMITTER VOLTAGE (V)
IF, FORWARD CURRENT (A)
40
35
TJ = 25°C
30
TJ = 150°C
25
20
15
10
5
0
0.5
1.0
1.5
2.0
2.5
3.0
10
8
6
VCE = 600 V
VGE = 25 V
IC = 25 A
4
2
0
3.5
200
150
100
VF, FORWARD VOLTAGE (V)
QG, GATE CHARGE (nC)
Figure 8. Typical Gate Charge
SWITCHING TIME (ns)
1000
VCE = 600 V
VGE = 15 V
IC = 25 A
Rg = 10 W
2.5
50
Figure 7. Diode Forward Characteristics
3.0
SWITCHING LOSS (mJ)
12
0
0
Eon
2.0
1.5
Eoff
1.0
VCE = 600 V
VGE = 15 V
IC = 25 A
Rg = 10 W
tf
td(off)
td(on)
100
tr
0.5
0
10
20
40
60
80
100
120
140
20
40
60
80
100
120
140
TJ, JUNCTION TEMPERATURE (°C)
TJ, JUNCTION TEMPERATURE (°C)
Figure 9. Switching Loss vs. Temperature
Figure 10. Switching Time vs. Temperature
5
1000
Eon
VCE = 600 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
4
0
160
3
SWITCHING TIME (ns)
0
SWITCHING LOSS (mJ)
14
Eoff
2
1
160
VCE = 600 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
tf
td(off)
100
td(on)
tr
0
0
10
20
30
40
50
10
60
0
10
20
30
40
50
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 11. Switching Loss vs. IC
Figure 12. Switching Time vs. IC
www.onsemi.com
4
60
NGTB25N120FL2WG
TYPICAL CHARACTERISTICS
1000
VCE = 600 V
VGE = 15 V
TJ = 150°C
IC = 25 A
5
4
td(off)
EON
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
6
3
2
EOFF
tf
td(on)
100
tr
VCE = 600 V
VGE = 15 V
TJ = 150°C
IC = 25 A
1
0
10
5
15
25
35
45
55
65
75
85
5
45
55
65
75
Rg, GATE RESISTOR (W)
Figure 14. Switching Time vs. Rg
1000
VGE = 15 V
TJ = 150°C
IC = 25 A
Rg = 10 W
EON
2
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
35
Rg, GATE RESISTOR (W)
EOFF
1
0
VGE = 15 V
TJ = 150°C
IC = 25 A
Rg = 10 W
85
tf
td(off)
100
td(on)
tr
10
350 400 450
500
550
600
650
700
750
350 400
800
450
500
550
600
650
700
750 800
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 15. Switching Loss vs. VCE
Figure 16. Switching Time vs. VCE
1000
1000
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
25
Figure 13. Switching Loss vs. Rg
4
3
15
100
10
dc operation
50 ms
100 ms
Single Nonrepetitive
Pulse TC = 25°C
Curves must be derated
linearly with increase
in temperature
1
0.1
1
10
100
1 ms
1000
100
10
VGE = 15 V, TC = 125°C
1
10k
1
10
100
1000
10k
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 17. Safe Operating Area
Figure 18. Reverse Bias Safe Operating Area
www.onsemi.com
5
NGTB25N120FL2WG
TYPICAL CHARACTERISTICS
SQUARE−WAVE PEAK R(t) (°C/W)
1
50% Duty Cycle
RqJC = 0.39
0.1 20%
10%
5%
R1
Junction
R2
Rn
Case
2%
0.01
C1
0.001
0.000001
0.00001
0.001
0.0001
0.01
Ci (J/°C)
0.000294
0.001568
0.010366
0.002294
0.001409
0.070949
0.048322 0.0065442
0.244018 0.4098053
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
Single Pulse
0.0001
Cn
C2
Ri (°C/W)
0.003402
0.002017
0.000965
0.013782
0.1
1
ON−PULSE WIDTH (s)
Figure 19. IGBT Die Self−heating Square−wave Duty Cycle Transient Thermal Response
SQUARE−WAVE PEAK R(t) (°C/W)
1
RqJC = 0.59
50% Duty Cycle
20%
0.1
Junction R1
R2
Rn
C1
C2
Cn
10%
5%
2%
0.01
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
Single Pulse
0.000001
0.00001
0.0001
0.001
0.01
Case
Ri (°C/W)
Ci (J/°C)
0.003402
0.002017
0.000965
0.013782
0.001409
0.048322
0.244018
0.000294
0.001568
0.010366
0.002294
0.070949
0.006544
0.409805
0.1
ON−PULSE WIDTH (s)
Figure 20. Diode Die Self−heating Square−wave Duty Cycle Transient Thermal Response
www.onsemi.com
6
1
NGTB25N120FL2WG
120
100
Ipk (A)
80
TC = 80°C
60
TC = 110°C
40
20
0
0.01
0.1
1
Freq (kHz)
10
Figure 21. Collector Current vs. Switching Frequency
Figure 22. Test Circuit for Switching Characteristics
www.onsemi.com
7
100
1000
NGTB25N120FL2WG
Figure 23. Definition of Turn On Waveform
www.onsemi.com
8
NGTB25N120FL2WG
Figure 24. Definition of Turn Off Waveform
www.onsemi.com
9
NGTB25N120FL2WG
PACKAGE DIMENSIONS
TO−247
CASE 340AL
ISSUE C
B
A
NOTE 4
E
SEATING
PLANE
0.635
M
P
A
D
S
NOTE 3
1
2X
2
4
DIM
A
A1
b
b2
b4
c
D
E
E2
e
F
L
L1
P
Q
S
3
L1
F
NOTE 5
L
2X
Q
E2
b2
c
b4
3X
e
A1
b
0.25
NOTE 7
M
B A
M
NOTE 6
E2/2
NOTE 4
B A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. SLOT REQUIRED, NOTCH MAY BE ROUNDED.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.
MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY
L1.
6. ∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE
TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.
7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED
BY L1.
M
MILLIMETERS
MIN
MAX
4.70
5.30
2.20
2.60
1.00
1.40
1.65
2.35
2.60
3.40
0.40
0.80
20.80
21.34
15.50
16.25
4.32
5.49
5.45 BSC
2.655
--19.80
20.80
3.81
4.32
3.55
3.65
5.40
6.20
6.15 BSC
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NGTB25N120FL2W/D
Similar pages