Vishay BYT28F-400-E3 Dual common cathode ultrafast soft recovery rectifier Datasheet

BYT28-x00, BYT28F-x00, BYT28B-x00, UG10xCT, UGF10xCT, UGB10xCT
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Ultrafast Soft Recovery Rectifier
FEATURES
ITO-220AB
TO-220AB
• Power pack
• Glass passivated pellet chip junction
• Ultrafast recovery time
• Low switching losses, high efficiency
• Low forward voltage drop
2
PIN 2
PIN 3
CASE
1
1
BYT28, UG10 Series
PIN 1
3
2
3
BYT28F, UGF10 Series
PIN 1
PIN 2
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
2
TYPICAL APPLICATIONS
1
BYT28B, UGB10 Series
PIN 2
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
(for TO-220AB and ITO-220AB package)
PIN 3
TO-263AB
K
PIN 1
• High forward surge capability
For use in high frequency rectifier of switching mode
power supplies, inverters, freewheeling diodes, DC/DC
converters, and other power switching application.
K
HEATSINK
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
2 x 5.0 A
VRRM
300 V to 400 V
IFSM
60 A
trr
35 ns
VF at IF
1.05 V
TJ max.
150 °C
Package
TO-220AB, ITO-220AB,
TO-263AB
Diode variations
Common cathode
Case: TO-220AB, ITO-220AB, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
BYT28-300
UG10FCT
BYT28-400
UG10GCT
UNIT
Maximum repetitive peak reverse voltage
VRRM
300
400
V
Maximum working reverse voltage
VRWM
300
400
V
Maximum RMS voltage
VRMS
210
280
V
Maximum DC blocking voltage
VDC
300
400
V
Maximum average forward rectified current at TC = 100 °C
total device
per diode
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode
Operating junction and storage temperature range
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
IF(AV)
10
5.0
A
IFSM
60
A
TJ, TSTG
-40 to +150
°C
VAC
1500
V
Revision: 23-Feb-16
Document Number: 88552
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYT28-x00, BYT28F-x00, BYT28B-x00, UG10xCT, UGF10xCT, UGB10xCT
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 5 A
Maximum instantaneous
forward voltage per diode
VALUE
VF (1)
V
1.40
TJ = 150 °C
1.05
TJ = 25 °C
Maximum reverse current
per diode at VRRM
UNIT
1.30
TJ = 25 °C
IF = 10 A
IF = 5 A
Maximum reverse recovery
time per diode
SYMBOL
10
IR
TJ = 100 °C
μA
200
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
35
trr
IF = 1.0 A, dI/dt = 100 A/μs, VR = 30 V,
Irr = 0.1 IRM
ns
50
Maximum reverse recovery
current per diode
IF = 5 A, dI/dt = 50 A/μs, VR = 30 V,
TC = 100 °C
IRM
3.0
A
Maximum stored
charge per diode
IF = 2 A, dI/dt = 20 A/μs, VR = 30 V,
Irr = 0.1 IRM
Qrr
50
nC
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance junction to case per diode
SYMBOL
BYT28
UG10
BYT28F
UGF10
BYT28B
UGB10
UNIT
RJC
4.5
6.7
4.5
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AB
BYT28-400-E3/45
1.80
45
50/tube
Tube
ITO-220AB
BYT28F-400-E3/45
1.95
45
50/tube
Tube
TO-263AB
BYT28B-400-E3/45
1.77
45
50/tube
Tube
TO-263AB
BYT28B-400-E3/81
1.77
81
800/reel
Tape and reel
TO-220AB
BYT28-400HE3/45 (1)
1.80
45
50/tube
Tube
ITO-220AB
BYT28F-400HE3/45
(1)
1.95
45
50/tube
Tube
TO-263AB
BYT28B-400HE3/45 (1)
1.77
45
50/tube
Tube
TO-263AB
(1)
1.77
81
800/reel
Tape and reel
BYT28B-400HE3/81
Note
(1) AEC-Q101 qualified
Revision: 23-Feb-16
Document Number: 88552
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYT28-x00, BYT28F-x00, BYT28B-x00, UG10xCT, UGF10xCT, UGB10xCT
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
15
Instantaneous Reverse Current (μA)
1000
Average Forward Current (A)
Resistive or Inductive Load
10
5
TJ = 100 °C
100
10
1.0
TJ = 25 °C
0.1
0
0
100
50
20
150
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics Per Diode
Stored Charge/Reverse Recovery Time
(nC/ns)
100
Peak Forward Surge Current (A)
TJ = 125 °C
TC = 105 °C
8.3 ms Single Half Sine-Wave
10
1
120
100
at 5 A, 50 A/μs
80
at 2 A, 20 A/μs
60
at 5 A, 50 A/μs
at 1 A, 100 A/μs
40
20
at 2 A, 20 A/μs
trr
Qrr
0
1
25
100
10
75
50
100
125
Number of Cycles at 60 Hz
Junction Temperature (°C)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
Fig. 5 - Reverse Switching Characteristics Per Diode
100
Pulse Width = 300 μs
1 % Duty Cycle
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
1.0
0.1
0.01
0.2
TJ = 100 °C
TJ = 125 °C
TJ = 25 °C
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 6 - Typical Junction Capacitance Per Diode
Revision: 23-Feb-16
Document Number: 88552
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYT28-x00, BYT28F-x00, BYT28B-x00, UG10xCT, UGF10xCT, UGB10xCT
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
ITO-220AB
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.370 (9.40)
0.360 (9.14)
0.185 (4.70)
0.175 (4.44)
0.154 (3.91)
0.148 (3.74)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
1
PIN
2
0.635 (16.13)
0.625 (15.87)
3
0.160 (4.06)
0.140 (3.56)
0.104 (2.65)
0.096 (2.45)
0.671 (17.04)
0.651 (16.54)
PIN
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
1
0.110 (2.79)
0.100 (2.54)
0.035 (0.89)
0.025 (0.64)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
K
2
0.624 (15.85)
0.591 (15.00)
0.055 (1.40)
0.047 (1.19)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
K
1
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
TO-263AB
0.190 (4.83)
0.160 (4.06)
0.191 (4.85)
0.171 (4.35)
0.057 (1.45)
0.045 (1.14)
0.022 (0.56)
0.014 (0.36)
0.245 (6.22)
MIN.
3
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.411 (10.45)
0.380 (9.65)
7° REF.
7° REF.
0.560 (14.22)
0.530 (13.46)
0.205 (5.20)
0.195 (4.95)
2
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.350 (8.89)
0.330 (8.38)
0.603 (15.32)
0.573 (14.55)
0.057 (1.45)
0.045 (1.14)
0.105 (2.67)
0.095 (2.41)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.145 (3.68)
0.135 (3.43)
7° REF.
0.076 (1.93) REF.
45° REF.
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 23-Feb-16
Document Number: 88552
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages