Thinki FR1601CT 16.0 ampere heatsink dual common cathode fast recovery rectifier Datasheet

FR1601CT thru FR1607CT
Pb
FR1601CT thru FR1607CT
Pb Free Plating Product
16.0 Ampere Heatsink Dual Common Cathode Fast Recovery Rectifiers
Features
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
TO-220AB
Unit : inch (mm)
.177(4.5)MAX
Automotive Inverters/Solar Inverters
Plating Power Supply,SMPS and UPS
Car Audio Amplifiers and Sound Device Systems
.038(0.96)
.019(0.50)
Mechanical Data
Case: Heatsink TO-220AB
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.1 gram approxiamtely
.50(12.7)MIN
Application
.1(2.54)
.624(15.87)
.054(1.39)
.045(1.15)
.548(13.93)
.139(3.55)
MIN
.269(6.85)
.196(5.00)
.163(4.16)
.226(5.75)
.419(10.66)
.387(9.85)
.025(0.65)MAX
.1(2.54)
Case
Case
Case
Negative
Positive
Common Cathode Common Anode
Suffix "CT"
Suffix "A"
Doubler
Tandem Polarity
Suffix "D"
Case
Series
Tandem Polarity
Suffix "S"
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Symbols
FR1601CT FR1602CT FR1603CT FR1604CT FR1605CT FR1606CT FR1607CT
Units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward Rectified Current
See Fig. 2
I(AV)
16.0
Amp
IFSM
150
Amp
VF
1.3
Volts
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage
at 8.0A DC and 25℃
Maximum Reverse Current
at TC=25℃
at Rated DC Blocking Voltage
TC=125℃
5.0
IR
Typical Thermal Resistance (Note 1)
RθJC
Maximum Reverse Recovery Time (Note 2)
TRR
Operating and Storage Temperature Range
TJ,Tstg
uAmp
100
℃/W
1.5
150
250
-55 to +150
500
nS
℃
NOTES:
1- Thermal Resistance from Junction to Case per Leg Mounted on Heatsink.
2- Reverse Recovery Test Conditions:IF=.5A,IR=1A,IRR=.25A.
Rev.07C
© 2006 Thinki Semiconductor Co., Ltd.
Page 1/2
http://www.thinkisemi.com/
FR1601CT thru FR1607CT
RATINGS AND CHARACTERISTIC CURVES
Rev.07C
© 2006 Thinki Semiconductor Co., Ltd.
Page 2/2
http://www.thinkisemi.com/
Similar pages