Vishay MMBZ5230-V-G Small signal zener diode Datasheet

MMBZ5225-V-G to MMBZ5267-V-G
www.vishay.com
Vishay Semiconductors
Small Signal Zener Diodes
FEATURES
• Silicon planar power Zener diodes.
3
1
• Standard Zener voltage tolerance is ± 5 % with
a “B” suffix (e.g.: MMBZ5225B-V-G), suffix “C”
is ± 2 % tolerance
• High temperature soldering guaranteed:
260 °C/4 x 10 s at terminals
2
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Note
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
UNIT
VZ range nom.
3 to 75
V
Test current IZT
1.7 to 20
mA
VZ specification
Thermal equilibrium
Int. construction
Single
ORDERING INFORMATION
ORDERING CODE
TAPED UNITS PER REEL
MINIMUM ORDER
QUANTITY
MMBZ5225-V-G to MMBZ5267-V-G
MMBZ5225-V-G to
MMBZ5267-V-Gseries-18
10 000 (8 mm tape on 13"
reel)
10 000/box
MMBZ5225-V-G to MMBZ5267-V-G
MMBZ5225-V to
MMBZ5267-V-G-series-08
3000 (8 mm tape on 7" reel)
15 000/box
DEVICE NAME
PACKAGE
PACKAGE NAME
SOT-23
WEIGHT
8.1 mg
MOLDING COMPOUND MOISTURE SENSITIVITY
FLAMMABILITY RATING
LEVEL
UL 94 V-0
MSL level 1
(according J-STD-020)
SOLDERING
CONDITIONS
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Power dissipation
Zener current
Junction to ambient air
Junction temperature, maximum
Storage temperature range
Rev. 1.2, 24-Nov-11
TEST CONDITION
SYMBOL
VALUE
UNIT
On FR - 5 board using recommended solder pad
layout
Ptot
225
mW
On alumina substrate
Ptot
300
mW
RthJA
556
K/W
See table “Caharacteristics”
On FR - 5 board using recommended solder pad
layout
Tj
150
°C
Tstg
- 65 to + 175
°C
Document Number: 85183
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMBZ5225-V-G to MMBZ5267-V-G
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
ZENER VOLTAGE
RANGE (1)
PART NUMBER
MARKING
CODE
VZ at IZT1
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
NOM.
3
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6
6.2
6.8
7.5
8.2
8.7
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
25
27
28
30
33
36
39
43
47
51
56
60
62
68
75
TEST
CURRENT
IZT1
V
MMBZ5225-V-G
MMBZ5226-V-G
MMBZ5227-V-G
MMBZ5228-V-G
MMBZ5229-V-G
MMBZ5230-V-G
MMBZ5231-V-G
MMBZ5232-V-G
MMBZ5233-V-G
MMBZ5234-V-G
MMBZ5235-V-G
MMBZ5236-V-G
MMBZ5237-V-G
MMBZ5238-V-G
MMBZ5239-V-G
MMBZ5240-V-G
MMBZ5241-V-G
MMBZ5242-V-G
MMBZ5243-V-G
MMBZ5244-V-G
MMBZ5245-V-G
MMBZ5246-V-G
MMBZ5247-V-G
MMBZ5248-V-G
MMBZ5249-V-G
MMBZ5250-V-G
MMBZ5251-V-G
MMBZ5252-V-G
MMBZ5253-V-G
MMBZ5254-V-G
MMBZ5255-V-G
MMBZ5256-V-G
MMBZ5257-V-G
MMBZ5258-V-G
MMBZ5259-V-G
MMBZ5260-V-G
MMBZ5261-V-G
MMBZ5262-V-G
MMBZ5263-V-G
MMBZ5264-V-G
MMBZ5265-V-G
MMBZ5266-V-G
MMBZ5267-V-G
IZT2
mA
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
9.5
9
8.5
7.8
7.4
7
6.6
6.2
5.6
5.2
5
4.6
4.5
4.2
3.8
3.4
3.2
3
2.7
2.5
2.2
2.1
2
1.8
1.7
REVERSE
LAEKAGE
CURRENT
IR at VR
μA
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
MAX.
50
25
15
10
5
5
5
5
5
5
3
3
3
3
3
3
2
1
0.5
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
DYNAMIC
RESISTANCE (2)
ZZ at IZT1

V
1
1
1
1
1
2
2
3
3.5
4
5
6
6.5
6.5
7
8
8.4
9.1
9.9
10
11
12
13
14
14
15
17
18
19
21
21
23
25
27
30
33
36
39
43
46
47
52
56
ZZK at IZT2
MAX.
30
28
24
23
22
19
17
11
7
7
5
6
8
8
10
17
22
30
13
15
16
17
19
21
23
25
29
33
35
41
44
49
58
70
80
93
105
125
150
170
185
230
270
TEMPERATURE
COEFFICIENT
VZ
%/°C
MAX.
1600
1600
1700
1900
2000
1900
1600
1600
1600
1000
750
500
500
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
700
700
800
900
1000
1100
1300
1400
1400
1600
1700
TYP.
- 0.075
- 0.07
- 0.065
- 0.06
- 0.055
± 0.030
± 0.030
0.038
0.038
0.045
0.05
0.058
0.062
0.065
0.068
0.075
0.076
0.077
0.079
0.082
0.082
0.083
0.084
0.085
0.086
0.086
0.087
0.087
0.089
0.09
0.091
0.091
0.092
0.093
0.094
0.095
0.095
0.096
0.096
0.097
0.097
0.097
0.098
Notes
• Maximum VF = 0.9 V, at IF = 10 mA
(1) Measured at thermal equilibrium
(2) The Zener impedance is derived from the 1 kHZ AC voltage which results when an AC current having an RMS value equal to 10 % of the
Zener current (IZT1 or IZT2) is superimposed on IZT1 or IZT2. Zener Impedance is measured at two points to insure a sharp knee on the
breakdown curve and to eliminate unstable units
Rev. 1.2, 24-Nov-11
Document Number: 85183
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMBZ5225-V-G to MMBZ5267-V-G
www.vishay.com
Vishay Semiconductors
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
mA
103
mW
250
102
IF
Ptot
10
200
TJ = 100 °C
1
150
10-1
TJ = 25 °C
100
10-2
10-3
50
10-4
10-5
0
0
0.2
0.4
0.6
0.8
1V
VF
18114
0
100
200 °C
Tamb
18672
Fig. 1 - Forward Characteristics
Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature
PACKAGE DIMENSIONS in millimeters (inches): SOT-23
1.15 (0.045)
o8
°
0.2 (0.008)
0.098 (0.004)
0.175 (0.007)
0.1 (0.004) max.
0.550 ref. (0.022 ref.)
0.9 (0.035)
3.1 (0.122)
2.8 (0.110)
0.45 (0.018)
0.35 (0.014)
0.35 (0.014)
0° t
0.5 (0.020)
0.45 (0.018)
0.3 (0.012)
2.6 (0.102)
2.35 (0.093)
Foot print recommendation:
1 (0.039)
0.9 (0.035)
0.9 (0.035)
0.7 (0.028)
2 (0.079)
1.43 (0.056)
1.20 (0.047)
0.45 (0.018)
0.35 (0.014)
1 (0.039)
0.9 (0.035)
0.95 (0.037)
0.95 (0.037)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
Rev. 1.2, 24-Nov-11
Document Number: 85183
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages