ALUMINUM ELECTROLYTIC CAPACITORS LGN NEW Snap-in Terminal Type, 105°C Smaller-Sized LGU Smaller Withstanding 2000 hours application of rated ripple current at 105°C. One rank smaller case sized than LGU. Addition of 600V rated voltage. Compliant to the RoHS directive (2011/65/EU). LGN Smaller LGG Specifications Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 600V Rated Capacitance Range 56 to3 220µF CV Capacitance Tolerance ± 20% 3 at CV120Hz, 20°C Leakage Current I Tangent of loss angle (tan δ) 0.20MAX. Stability at Low Temperature Endurance Shelf Life Marking 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency : 120Hz at 20°C Impedance ratio ZT/Z20 (MAX.) 8 Z – 25°C/ Z+20°C Measurement frequency : 120Hz The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change Within ± 20% of the initial capacitance value tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Capacitance change Within ± 20% of the initial capacitance value tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Polarity bar Drawing φ D +1.5MAX. φ D +1.5MAX. φ D +1.5MAX. Polarity bar Polarity(P.E.T. bar ) Sleeve Sleeve (P.E.T.) Pressure relief vent 4.0±0.5 4.0±0.5 L±2 L±2 Pressure relief vent Pressure relief vent (PC board hole dimensions) 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Case length code Case dia. code Capacitance tolerance (±20%) 4.0±0.5 4.0±0.5 4.0±0.5 （2.5） （2.5） （2.5） Rated capacitance (68µF) Configuration Configuration Rated voltage Capacitance tolerance(600V) (±20%) Capacitance tolerance (±20%) Series(68µF) name Rated capacitance Rated capacitance (68µF) Type Rated voltage (600V) Rated voltage (600V) Series name Series name Type Type （1 （01） 0） .2 +0 .1 0 0.8 - .2 +0 .1 0 0.8 +0.2 -0.1 0.8 +0.2 -0.1 φD length Code Case code 30 length Case code Case dia.Bcode 35 Case dia.Ccode φD Code φD Code 30 B 30 35 CB 35 C 0.8 -+0..21 0 0.8 - 1.5 +0.2 -0.1 Frequency coefficient of rated ripple current (Terminal dimensions) 1.5 +0.2 -0.1 1.5 +0.2 -0.1 Minimum order quantity : 50pcs. (PC board hole dimensions) Dimensions 3 （1 0） 0.8 +0.2 -0.1 (PC board hole dimensions) 2 L1 G2 N3 24 X5 66 87 08 M9 E10 L11 B12 313 014 L G N 2 X 6 8 0 M E L B Configuration 3 0 4.0±0.5 L±2 1 Type L G Nnumbering 2 X 6 8 system 0 M E L(Example B 3 0 : 600V 68µF) Sleeve (P.E.T.) Frequency (Hz) Coefficient 50 0.77 60 0.82 120 1.00 300 1.16 1k 1.30 10k 50k or more 1.41 1.43 (Terminal dimensions) (Terminal dimensions) 600V (2X) Cap.(µF) 56 68 82 100 120 150 180 220 Size φ D× L (mm) 30 × 25 30 × 30 30 × 35 35 × 25 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 Rated ripple (mArms) Leakage Current (mA) 500 560 610 610 670 670 740 740 830 830 900 1000 0.55 0.61 0.67 0.67 0.73 0.73 0.80 0.80 0.90 0.90 0.99 1.09 Code LGN2X560MELB25 LGN2X680MELB30 LGN2X820MELB35 LGN2X820MELC25 LGN2X101MELB40 LGN2X101MELC30 LGN2X121MELB45 LGN2X121MELC35 LGN2X151MELB50 LGN2X151MELC40 LGN2X181MELC45 LGN2X221MELC50 Rated ripple current (mArms) at 105°C 120Hz