UTC M4034-D08-T 3-input video switch Datasheet

UNISONIC TECHNOLOGIES CO., LTD
M4034
LINEAR INTEGRATED CIRCUIT
3-INPUT VIDEO SWITCH
DESCRIPTION
SOP-8
The UTC M4034 is 3-input video switch selecting one of three
input video or audio signals. Its operating supply voltage range is 5 ~
12V and bandwidth is 10MHz. Crosstalk is 70dB (at 4.43MHz).
DIP-8
MSOP-8
FEATURES
* Operating Voltage: +4.75V ~ +13V
* 3 Input-1 Output
* Muting Function available
* Wide Operating Supply voltage Range: 4.75V ~ 13V
* Cross-talk 70dB (at 4.43MHz)
* Muting Function available
* Bipolar Technology
SSOP-8
SIP-8
*Pb-free plating product number: M4034L
ORDERING INFORMATION
Normal
M4034-D08-T
M4034-G08-T
M4034-S08-R
M4034-S08-T
M4034-SM1-R
M4034-SM1-T
M4034-R08-R
M4034-R08-T
Order Number
Lead Free Plating
M4034L-D08-T
M4034L-G08-T
M4034L-S08-R
M4034L-S08-T
M4034L-SM1-R
M4034L-SM1-T
M4034L-R08-R
M4034L-R08-T
Package
Packing
DIP-8
SIP-8
SOP-8
SOP-8
MSOP-8
MSOP-8
SSOP-8
SSOP-8
Tube
Tube
Tape Reel
Tube
Tape Reel
Tube
Tape Reel
Tube
M4034L-D08-T
(1)Packing Type
(2)Package Type
(3)Lead Plating
www.unisonic.com.tw
Copyright © 2005 Unisonic Technologies Co., Ltd
(1) R: Tape Reel, T: Tube
(2) D8: DIP-8, G08: SIP-8, S08: SOP-8,
SM 1: MSOP-8, R08: SSOP-8
(3) L: Lead Free Plating, Blank: Pb/Sn
1 of 6
QW-R124-005,A
M4034
LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
V OUT
VIN 2
3
6
V+
SW2
4
5
VIN 3
1
GND
7
V OUT
2
V+
SW1
2 3 4 5 6
7
8
V IN 3
GND
SW2
8
V IN 2
1
SW1
VIN 1
SIP-8
VI N1
SOP-8/DIP-8/MSOP-8/SSOP-8
BLOCK DIAGRAM
GND
8
V+
6
VOUT
7
VIN3 (Mute)
5
15k
15k
1
V IN1
2
SW1
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
BIAS C.C.T.
BUFFER
3
VIN2
15k
4
SW2
2 of 6
QW-R124-005,A
M4034
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATINGS
15
SOP-8
250
DIP-8
500
Power Dissipation
PD
MSOP-8
300
SSOP-8
250
SIP-8
800
Junction Temperature
TJ
+125
Operating Temperature
TOPR
-20 ~ +75
Storage Temperature
TSTG
-40 ~ +125
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Supply Voltage
SYMBOL
V+
UNIT
V
mW
mW
mW
mW
mW
℃
℃
℃
ELECTRICAL CHARACTERISTICS (VIN=5V, Ta=25℃)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP MAX
Recommended Supply Voltage
V+
4.75
13.0
Output Offset Voltage
VO(OFF) (Note 2)
-30
+30
High
VCH
All inside SW : ON
2.4
Switch Change Voltage
All inside SW : OFF
0.8
Low
VCL
Operating Current
ICC
S1=S2=S3=S4=S5=1
10.6 14.5
Voltage Gain
GV
VIN=2.5V, 100kHz, VOUT/VIN
-0.5
+0.5
Total Harmonic Distortion
THD VINI=2.5V, 1kHz
0.03
Differential Gain
DG
VIN=2V, Staircase signal
0
Differential Phase
DP
VIN=2V, Staircase signal
0
Frequency Characteristic (1)
Gf1
VIN=2.5V, VOUT(20Hz)/VOUT (100kHz)
-1.0
+1.0
Frequency Characteristic (2)
Gf2
VIN=2.0V, VOUT(10MHz)/VOUT(100kHz) -1.0
+1.0
Crosstalk (1)
CT1
VIN=2.0V, 4.43MHz, VOUT/VIN (Note 3)
-70
Crosstalk (2)
CT2
VIN=2.0V, 4.43MHz, VOUT/VIN (Note 4)
-70
Input Impedance
R1
15
Output Impedance
ROUT
10
Note 1: If it is not shown about switch condition, it is tested on three conditions below.
(a) S1=2, S2=S3=S4=S5=1, (b) S2=S4=2, S1=S3=S5=1, (c) S3=S5=2, S1=S2=1, S4=1, or 2.
Note 2: S1=S2=S3=1, Output DC Voltage difference of three mode below.
(a) S4=S5=1, (b) S4=2, S5=1 (c) S4=1 or 2, S5=2
Note 3: S5=1, Tested on all combination of S1 to S4 excepted two below.
(a) S1=S2, S4=1 (b) S2=S4=2
Note 4: Tested on all combination of S1 to S4 excepted one.
(a) S5=2, S3=2
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
UNIT
V
mV
V
V
mA
dB
%
%
deg
dB
dB
dB
dB
kΩ
Ω
3 of 6
QW-R124-005,A
M4034
LINEAR INTEGRATED CIRCUIT
EQUIVALENT CIRCUIT
PIN NO.
PIN
FUNCTION
INSIDE EQUIVALENT CIRCUIT
PIN NO.
PIN
INSIDE EQUIVALENT CIRCUIT
FUNCTION
V+
V+
VIN1
1
VIN3
200Ω
VIN1
5
VIN3
(Mute)
6
V+
200Ω 15kΩ
200Ω
200Ω 15kΩ
SW1
2kΩ
2
13kΩ
200Ω
SW1
9kΩ
1.1mA
V+
VIN2
3
200Ω
VIN2
200Ω
7
VOUT
VOUT
200Ω 15kΩ
5mA
SW2
2kΩ
4
13kΩ
200Ω
SW2
1.1mA
8
9kΩ
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
GND
4 of 6
QW-R124-005,A
M4034
LINEAR INTEGRATED CIRCUIT
TEST CIRCUIT
GND
V+
10μF
+
0.01μ F
VOUT
+
8
7
6
5
GND
VOUT
V+
VIN3
VIN1
SW1 VIN2 SW2
3
10μF
1
VOUT
4
10μ F
S1
2
RL
1kΩ
+
2
+
+
1
220μF
S2
2
10μF
S3
1
2
1
V1
S4
1
2
S5
1
2
V CON
5V
CONNECTION DIAGRAM
Terminal Name
VIN1
DC Voltage
3 +
V
5
SW1
VIN2
3 +
V
5
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
SW2
VIN3
3 +
V
5
V+
VOUT
GND
3 +
V -0.7
5
5 of 6
QW-R124-005,A
M4034
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATION CIRCUIT
Oscillation Prevention on light loading conditions
Recommended under circuit
r
r 100Ω
C 20pF
V OUT 7
C
LPF
Note: 0.1uF capacitor is required between INPUT and GND for bias type input at mute mode.
Input
C
0.1μF
C
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R124-005,A
Similar pages