Lumileds DS175 Automotive forward lighting source Datasheet

AUTOMOTIVE
LUXEON Altilon SMD
Automotive forward lighting source
LUXEON Altilon SMD is specifically designed and tested to meet
and exceed expectations for reliability, performance, and lifetime in
automotive forward lighting applications. It is designed to be assembled
with industry standard soldering reflow lines simplifying system
integration and lowering assembly costs.
LUXEON Altilon SMD provides industry-best thermal performance in
LED forward lighting applications, meeting both SAE and ECE color
specifications with finer granularity than existing systems. PPAP
documentation is available upon request. All LUXEON Altilon SMD LEDs
are IEC-60810 qualified.
Features and Benefits
Primary ApplicationS
Higher drive current capability for increased flux performance
Adaptive Lighting
Low thermal resistance and power consumption results in simplified thermal
management and system cost
–– AFS
High flux output provides flexibility in styling and optical design
Daytime Running Lights
Surface mount device to reduce overall costs
Front Fog
Headlight
–– Low Beam
–– High Beam
–– Static Bending
RoHS
COMPLIANT
DS175 LUXEON Altilon SMD Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current and Voltage Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Color Shift Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operating Limits Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Designing with LUXEON Altilon SMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Color Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Product Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON Altilon SMD LEDs are tested and binned using a 20ms monopulse (MP) at 1000mA drive current, case temperature,
Tc, of 85ºC.
Part Number Nomenclature
Part numbers for LUXEON Altilon SMD follow the convention below:
A 1 S B – 5 8 5 0 B D H 0 C C C C 0
Where:
B
–
designates number of die (2, 3, 4 or 5)
C C C C
–
designates minimum flux bin
Therefore, the following part number is used for a LUXEON Altilon SMD with 3 die and a minimum of 780 lumens:
A 1 S B – 5 8 5 0 3 D H 0 0 7 8 0 0
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Altilon SMD
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product selection for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
CONFIGURATION
Part Number
1x2
A1SB-58502DH0xxxx0
1x3
A1SB-58503DH0xxxx0
1x4
A1SB-58504DH0xxxx0
1x5
A1SB-58505DH0xxxx0
Optical Characteristics
Table 2. Typical optical characteristics for LUXEON Altilon SMD at 1000mA, Tc=85°C.
Correlated Color Temperature
Minimum
Maximum
Typical Total Included
Angle [1]
θ0.90V
A1SB-58502DH0xxxx0
5500K
6250K
140°
120°
A1SB-58503DH0xxxx0
5500K
6250K
140°
120°
A1SB-58504DH0xxxx0
5500K
6250K
140°
120°
A1SB-58505DH0xxxx0
5500K
6250K
140°
120°
Part Number
Typical Viewing Angle [2]
θ1/2
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
3
Electrical and Thermal Characteristics
Table 3. Typical electrical and thermal characteristics for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
PERFORMANCE
Parameter
1x2
Forward Voltage, Vf [1]
Electrical Thermal Resistance, Rth j-c electr [2]
Real Thermal Resistance, Rth j-c real [3]
1x3
1x4
1x5
min
5.5
8.2
11.1
13.8
max
7.0
10.3
13.6
16.9
typ
2.2°C/W
1.8°C/W
1.5°C/W
1.2°C/W
max
2.5°C/W
2.1°C/W
1.8°C/W
1.5°C/W
typ
3.2°C/W
2.6°C/W
2.2°C/W
1.8°C/W
max
3.5°C/W
3.0°C/W
2.6°C/W
2.2°C/W
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Rth j-c electr: Electrical thermal resistance (junction to case).
3. Rth j-c real: Real thermal resistance (junction to case) with wall plug efficiency included. Reference JESD51-51, JESD51-14, 4.1.3.
Absolute Ratings
Table 4. Absolute ratings for LUXEON Altilon SMD.
PERFORMANCE
Parameter
1x2
1x3
Minimum DC Forward Current
100mA
Maximum DC Forward Current
1500mA
Operating Case Temperature at 700mA [1, 2]
-40°C to 130°C
Maximum Junction Temperature [1, 2. 3]
150°C
Operating Case Temperature at Maximum Current
-40°C to 125°C
Maximum Junction Temperature
for Short Time Applications [4]
175°C
Maximum Vf at 1500mA & -40°C
[1, 3]
Minimum Vf at 1500mA & 150°C
7.8
11.6
5.5
8.1
LED Storage Temperature
-40°C to 130°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
2
ESD Sensitivity
[5]
Reverse Voltage (Vreverse)
1x4
1x5
15.4
19.3
11.0
13.6
8kV HBM, 2kV CDM, 400V MM
LUXEON Altilon SMD LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain junction temperature below the maximum, so that the LED is maintained below the maximum rated operating case temperature.
2. LUXEON Altilon SMD LEDs driven at or above the maximum rated operating case temperature may have shorter lifetime.
3. Please consult with Lumileds for more information on maximum time durations and forward currents for these temperatures.
4. Short time operations of less than 200hrs.
5. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101).
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1. Typical normalized power vs. wavelength for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
Light Output Characteristics
Figure 2a. Typical normalized light output vs. case temperature for LUXEON Altilon SMD at 1000mA, 20ms MP.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
5
Figure 2b. Typical normalized light output vs. forward current for LUXEON Altilon SMD at Tc=85°C.
Forward Current and Voltage Characteristics
Figure 3a. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x2 at Tc=85°C.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
6
Figure 3b. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x3 at Tc=85°C.
Figure 3c. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x4 at Tc=85°C.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
7
Figure 3d. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x5 at Tc=85°C.
Figure 3e. Typical forward voltage shift vs. case temperature for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
8
Color Shift Characteristics
Figure 4a. Typical color shift in CIE 1931 x and y coordinates for LUXEON Altilon SMD at 1000mA, 20ms MP.
Figure 4b. Typical color shift over angle for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
9
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for LUXEON Altilon SMD at 1000mA, 20ms MP.
Operating Limits Characteristics
Figure 6. Maximum forward current vs. case temperature for LUXEON Altilon SMD.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
10
Product Bin and Labeling Definitions
Designing with LUXEON Altilon SMD
Flux bins supportable for car programs depend on product color and program start- and end-of-production date. Flux roadmaps
by year and product color are maintained and available from the sales representative. Please contact a local sales representative
to request the flux bin range with best supportability for program timing.
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheets. For this reason, Lumileds bins the LED components for luminous flux or radiometric power, forward voltage,
color point, peak wavelength, or dominant wavelength.
The CAT code identifies the flux and color bin of each part. The CAT code can be found in two distinct places, the package label
and the TnR label. LUXEON Altilon SMD LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:
A B C D
Where:
A
–
designates minimum luminous flux per die (F=280, G=290, K=320, etc.)
B
–
designates number of die (2, 3, 4 or 5)
C D –
designates color bin (example: 1D, 2C, 3B, 4A, etc.)
Therefore, a LUXEON Altilon SMD 1x5 with a minimum luminous flux of 280 and a color bin of 3B has the following CAT code:
F 5 3 B
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON Altilon SMD emitters. Product availability in a particular bin varies by
color and platform start of production date. Contact your local sales representative for best supportability of programs.
Table 5a. Luminous flux bin definitions for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
Bin
Luminous Flux [1] (lm) per Die
Minimum
Maximum
F
280
290
G
290
300
H
300
310
J
310
320
K
320
330
L
330
340
M
340
350
N
350
360
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
2. Product availability in a particular bin varies by color and platform start of production date.
3. Contact local sales representative for best supportability of programs.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
11
Table 5b. Luminous flux bin definitions for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
Bin
2
(1x2)
3
(1x3)
4
(1x4)
5
(1x5)
F
560
840
1120
1400
G
580
870
1160
1450
H
600
900
1200
1500
J
620
930
1240
1550
K
640
960
1280
1600
The total flux bin is defined on a per die basis, the first letter on the flux bin will define the minimum flux per die and the second
letter will define the number of die in the device, i.e. C4 where C will designate a minimum flux per die of 250 lm and 4 will
designate that the part has four die, therefore the total flux from the device will be a minimum of 1000 lm.
This will allow for better flux bin granularity, as a 1x2 will have 20 lm flux bin increments, a 1x3 30 lm, a 1x4 40 lm and a 1x5 50 lm.
The flux bin is defined on the total flux of the device as die are not individually measured.
Color Bin Structure
0.38
0.37
0.36
y
0.35
0.34
0.33
0.32
0.31
0.3
0.3
0.31
0.32
0.33
x
0.34
0.35
0.36
Figure 7. Color bin structure in CIE 1931 color space for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
12
Color Codes
Table 6. Color code definitions for LUXEON Altilon SMD at 1000mA 20ms MP, Tc=85°C.
Code
1A
1B
1C
1D [3]
2A
2B
2C [3]
2D
x [1, 2]
y [1, 2]
0.3109
0.3382
0.3161
0.3432
0.3169
0.3353
0.3120
Typical CCT (K)
x [1, 2]
y [1, 2]
0.3242
0.3506
0.3325
0.3579
0.3325
0.3493
0.3306
0.3246
0.3424
0.3120
0.3306
0.3246
0.3424
0.3169
0.3353
0.3325
0.3493
0.3177
0.3277
0.3324
0.3410
0.3131
0.3232
0.3249
0.3344
0.3161
0.3432
0.3325
0.3579
0.3242
0.3506
0.3412
0.3652
0.3246
0.3424
0.3406
0.3562
6390
6390
6050
Code
3A
3B [3]
3C
0.3169
0.3353
0.3325
0.3493
0.3169
0.3353
0.3325
0.3493
0.3246
0.3424
0.3406
0.3562
0.3249
0.3344
0.3401
0.3476
0.3177
0.3277
0.3324
0.3410
0.3109
0.3211
0.3249
0.3344
0.3177
0.3277
0.3324
0.3410
0.3185
0.3203
0.3323
0.3329
0.3120
0.3139
0.3253
0.3266
0.3120
0.3139
0.3253
0.3266
0.3185
0.3203
0.3323
0.3329
0.3192
0.3131
0.3323
0.3251
0.3131
0.3070
0.3256
0.3191
0.3177
0.3277
0.3324
0.3410
0.3249
0.3344
0.3401
0.3476
0.3253
0.3266
0.3396
0.3392
0.3185
0.3203
0.3323
0.3329
0.3185
0.3203
0.3323
0.3329
0.3253
0.3266
0.3396
0.3392
0.3256
0.3191
0.3392
0.3310
0.3192
0.3131
0.3323
0.3251
6050
6460
6460
6050
6050
3D
4A [3]
4B
4C
4D
Typical CCT (K)
5680
5680
5350
5350
5680
5680
5350
5350
Notes for Table 6:
1. LUXEON Altilon SMD emitters are tested and binned by x and y coordinates.
2. Lumileds maintains a tester tolerance of ±0.005 on x and y coordinates.
3. Color bins 1D, 2C, 3B and 4A are currently supportable. Ask your sales representative about supportability of the different color bins.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
13
Mechanical Dimensions
ANGULARITY TOLERANCE
2.5 at 2 PLACES
2.70 ±0.075*
1.06
CL
0.13
0.13
0.84 ±0.075*
0.35
1.05 (2x)
0.88
1.20 (2x)
R0.13 (8x)
1.06
3.00 ±0.075*
0.50
ANODE
1.05 (2x)
R0.25 (8x)
2X LIGHT EMITTER
LASER MARK
0.3x1.1
2.21
0.45
1.00 (2x)
CATHODE
Figure 8. Mechanical dimensions for LUXEON Altilon SMD 1x2.
ANGULARITY TOLERANCE
2.5 at 3 PLACES
3.85 ±0.075*
1.06
0.12
0.84 ±0.075*
CL
0.13
0.35
1.63 (2x)
R0.13 (8x)
0.88
1.20 (2x)
1.06
3.00 ±0.075*
ANODE
0.50
1.05 (2x)
R0.25 (8x)
3.36
B
3X LIGHT EMITTER
LASER MARK
0.3x1.1
0.55
1.53 (2x)
CATHODE
Figure 9. Mechanical dimensions for LUXEON Altilon SMD 1x3.
Notes for Figures 8 and 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
14
ANGULARITY TOLERANCE
2.5 at 4 PLACES
5.00 ±0.075*
1.06
0.42
0.84 ±0.075*
CL
0.88
0.13
0.50
1.83 (2x)
R0.13 (8x)
1.20 (2x)
1.06
3.00 ±0.075*
ANODE
0.50
1.05 (2x)
4X LIGHT EMITTER
4.51
R0.25 (8x)
LASER MARK
0.3x1.1
1.76 (2x)
0.65
CATHODE
Figure 10. Mechanical dimensions for LUXEON Altilon SMD 1x4.
6.15 ±0.075*
1.06
ANGULARITY TOLERANCE
2.5 at 5 PLACES
0.84 ±0.075*
CL
0.88
0.58
0.50
2.25 (2x)
0.13
R0.13 (8x)
1.20 (2x)
1.06
3.00 ±0.075*
ANODE
0.50
1.05 (2x)
R0.25 (8x)
5.66
5X LIGHT EMITTER
LASER MARK
0.3x1.1
0.75
2.13 (2x)
CATHODE
Figure 11. Mechanical dimensions for LUXEON Altilon SMD 1x5.
Notes for Figures 10 and 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
15
Reflow Soldering Guidelines
Figure 12. Visualization of the acceptable reflow temperature profile as specified in Table 7.
Table 7. Reflow profile characteristics for LUXEON Altilon SMD.
PROFILE FEATURE
Lead Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 180 seconds
Ramp-Up Rate (Tsmax to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
Notes for Table 7:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
JEDEC Moisture Sensitivity
Table 8. Moisture sensitivity levels for LUXEON Altilon SMD.
level
1
Floor Life
TIme
Conditions
Unlimited
≤30°C / 85% RH
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
16
Solder Pad Design
Details for recommended solder pad designs that provide low thermal resistance will be published in a separate application brief.
These recommendations are not intended to represent specifications for soldering LUXEON Altilon SMD LEDs.
Thermal
Thermal
Anode
Cathode
Figure 13. Recommended PCB solder pad layout for LUXEON Altilon SMD.
Notes for Figure 13:
1. All dimensions are in millimeters.
2. The thermal pads are electrically isolated from the anode and cathode contact pads.
Packaging Information
Pocket Tape Dimensions
B
A
A
B
Ao:
Bo:
Ko:
K1:
Pitch:
3.25±0.10
2.95±0.10
1.30±0.10
8.00±0.10
Width:
12.00±0.15
Figure 14. Pocket tape dimensions for LUXEON Altilon SMD 1x2.
Notes for Figure 14:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
17
B
A
A
B
Ao:
Bo:
Ko:
K1:
Pitch:
3.25±0.10
4.10±0.10
1.30±0.10
8.00±0.10
Width:
12.00±0.15
Ao:
Bo:
Ko:
K1:
Pitch:
3.25±0.10
5.25±0.10
1.30±0.10
8.00±0.10
Width:
12.00±0.15
Figure 15. Pocket tape dimensions for LUXEON Altilon SMD 1x3.
B
A
A
B
Figure 16. Pocket tape dimensions for LUXEON Altilon SMD 1x4.
Notes for Figures 15 and 16:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
18
B
A
A
B
Ao:
Bo:
Ko:
K1:
Pitch:
3.25±0.10
6.40±0.10
1.30±0.10
8.00±0.10
Width:
12.00±0.15
Figure 17. Pocket tape dimensions for LUXEON Altilon SMD 1x5.
Notes for Figure 17:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Reel Dimensions
SPI=1000
Figure 18. Reel dimensions for LUXEON Altilon SMD 1x2.
Notes for Figure 18:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
19
SPI=1000
Figure 19. Reel dimensions for LUXEON Altilon SMD 1x3.
SPI=1000
Figure 20. Reel dimensions for LUXEON Altilon SMD 1x4.
Notes for Figures 19 and 20:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
20
SPI=1000
Figure 21. Reel dimensions for LUXEON Altilon SMD 1x5.
Notes for Figure 21:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
21
Product Labeling
LUXEON Altilon SMD LEDs are packaged in moisture barrier bags on reels. Both moisture barrier bag and reels have printed
information providing part numbers with CAT codes that indicate luminous flux, color and forward voltage bins.
Figure 22. Example of a product label for LUXEON Altilon SMD.
Notes for Figure 22 – Outer Box Label descriptions for customer use:
Field labels not described are for Lumileds internal use only.
1. Total number of LED emitters in a shipment box.
2. Lumileds part number
3. Customer part number for custom requests only.
4. LED test date in YYWW format.
5. Unique product lot identification number. This number is required for traceability purposes.
6. Country code of origin of manufacturing of part (e.g. MY for Malaysia, CN for China) according to ISO 3166-1 alpha-2 document.
7. Product bin 4-digit alphanumeric CAT code.
DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved.
22
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS175 LUXEON Altilon SMD
Product Datasheet 20171211
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.