Littelfuse ICTE-22/MPTE-22 Silicon avalanche diodes - 1500 watt axial leaded transient voltage suppressor Datasheet

Silicon Avalanche Diodes
1500 Watt Axial Leaded Transient Voltage Suppressors
ICTE/MPTE Series
®
The ICTE/MPTE series 1500 W transient suppressors are designed
specifically for protection of CMOS, NMOS, BiMOS, and other
integrated circuits available today for TTL, DTL, ECL, RTL, and
linear functions. This series offers the lowest clamping voltages.
SILICON DIODE
ARRAYS
6
FEATURES
• Stand-off voltage range 5 to 45 Volts
• Uni-directional and Bi-directional
• Glass passivated junction
• Very low clamping voltages
• 100% surge tested
MAXIMUM RATING
• Peak Pulse Power (Ppk): 1500 Watts (10 x 1000µs) @25°C
(see diagram on page 3 for wave form)
• 5 watt steady state
• Response time: 1 x 10-12 seconds (theoretical)
Max 1.066
• Forward surge rating 200 Amps, 8.3ms half sine wave, (uni-
directional devices only)
• Operating & storage temperature: -55°C to +150°C
MECHANICAL CHARACTERISTICS
Min 25.4
• Case: DO-201AD: Molded plastic over glass
passivated junction
4.826
5.207
• Terminals: Axial leads, solderable per MIL-STD-202
Method 208
• Solderable leads = 230°C for 10 seconds (1.59mm from case)
• Marking: cathode band, (positive terminal, uni-directional
9.146
9.527
devices only), device code, logo
• Weight: 1.5 grammes (approx)
Agency Approvals: Recognized under the Components
Program of Underwriters Laboratories.
Min 25.4
Agency File Number: E128662
All dimensions in mm
ORDERING INFORMATION
ICTE or MPTE
C
Voltage
Bi-Directional
Packaging Option
B = Bulk (500 pcs)
T = Tape and reeled (1500 pcs)
w w w. l i t t e l f u s e . c o m
307
Silicon Avalanche Diodes
1500 Watt Axial Leaded Transient Voltage Suppressors
ICTE/MPTE Series
®
100,000
Measured at
Zero Bias
100
10,000
Measured at
Stand-Off
Voltage (VR)
Cj (pf)
10
Pp
(kw)
1000
1.0
TJ=2 5°C
f=1.0 MHz
Vsig=50mVp-p
100
1
2
5
0.1
10 20 50 100 200
1µs
1.0µs
Figure 2 - Peak Pulse Power Rating Curve
ELECTRICAL SPECIFICATION @ Tamb 25°C
Maximum
Clamping
Voltage
VC @ IPP 2=10A
(Volts)
Maximum
Peak Pulse
Current
IPP
(A)
7.1
7.5
160.0
11.3
11.5
100.0
13.7
14.1
90.0
2.0
16.1
16.5
70.0
17.6
2.0
20.1
20.6
60.0
18.0
21.2
2.0
24.2
25.2
50.0
22.0
25.9
2.0
29.8
32.0
40.0
ICTE-36/MPTE-36
36.0
42.4
2.0
50.6
54.3
23.0
ICTE-45/MPTE-45
ICTE-8C/MPTE-8C
45.0
8.0
52.9
9.4
2.0
50.0
63.3
11.4
70.0
19.0
11.6
100.0
ICTE-10C/MPTE-10C
10.0
11.7
2.0
14.1
14.5
90.0
ICTE-12C/MPTE-12C
12.0
14.1
2.0
16.7
17.1
70.0
ICTE-15C/MPTE-15C
15.0
17.6
2.0
20.8
21.4
60.0
ICTE-18C/MPTE-18C
18.0
21.2
2.0
24.8
25.5
50.0
ICTE-22C/MPTE-22C
22.0
25.9
2.0
30.8
32.0
40.0
ICTE-36C/MPTE-36C
36.0
42.4
2.0
50.6
54.3
23.0
ICTE-45C/MPTE-45C
45.0
52.9
2.0
63.3
70.0
19.0
Reverse
Standoff
Voltage
Vr
(Volts)
Minimum
Breakdown
Voltage
Vbr @1mA
(Volts)
Maximum
Reverse
Leakage
Ir @ Vr
(µA)
ICTE-5/MPTE-5*
5.0
6.0
300.0
ICTE-8/MPTE-8*
8.0
9.4
25.0
ICTE-10/MPTE-10
10.0
11.7
2.0
ICTE-12/MPTE-12
12.0
14.1
ICTE-15/MPTE-15
15.0
ICTE-18/MPTE-18*
ICTE-22/MPTE-22
Maximum
Clamping
Voltage
VC @ IPP 1=1A
(Volts)
ICTE-5 is not available in Bi-directional. Suffix ‘C’ denotes Bi-directional device. * Preferred voltages.
VF max = 3.5 Volts max at IF = 50A 300µS square wave pulse
308
1.0ms
Breakdown Voltage - Volts
Figure 1 - Typical Junction Capacitance
Part
Number
100µs
Pulse Width (tp)
Pulse width (tp)
V(BR) -
10µs
w w w. l i t t e l f u s e . c o m
10ms
Similar pages