Vishay M8340101M3302GBD04 Thick film resistor networks military, mil-prf-83401 qualified, type rz dual-in-line package, 01, 03, 05 schematic Datasheet

MDM (Military M83401)
Vishay Dale
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,
Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
FEATURES
•
•
•
•
•
MIL-PRF-83401 qualified
Epoxy molded construction
All device leads are hot-solder dipped
Available in tube pack
TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C)
depending on style
• 100 % screen tested per Group A, Subgroup 1 of
MIL-PRF-83401
• All devices are capable of passing the MIL-STD-202,
Method 210, Condition D, “Resistance to Soldering Heat”
test
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL/
PINS NO
RESISTOR
POWER RATING
MAX. at 70 °C
W
0.10
0.20
0.05
0.10
0.20
0.05
SCHEMATIC
MDM 14
01
MDM 14
03
MDM 14
05
MDM 16
01
MDM 16
03
MDM 16
05
Notes
(1) K = ± 100 ppm/°C; M = ± 300 ppm/°C
(2) ± 1 % and ± 5 % tolerances available on request
PACKAGE
POWER RATING
MAX. at 70 °C
W
1.30
1.40
1.20
1.50
1.60
1.40
RESISTANCE
RANGE
Ω
STANDARD
TOLERANCE
±%
TEMPERATURE
WEIGHT
COEFFICIENT
g
(- 55 °C to + 125 °C)
10 - 1M
10 - 1M
Consult factory
10 - 1M
10 - 1M
Consult factory
± 2 (± 1, ± 5) (2)
± 2 (± 1, ± 5) (2)
± 2 (± 1, ± 5) (2)
± 2 (± 1, ± 5) (2)
± 2 (± 1, ± 5) (2)
± 2 (± 1, ± 5) (2)
K, M (1)
K, M (1)
K, M (1)
K, M (1)
K, M (1)
K, M (1)
1.3
1.3
1.3
1.5
1.5
1.5
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format)
M
8
3
4
0
1
0
1
M
2
2
0
CHARACTERISTIC
RESISTANCE
TOLERANCE
VALUE
01 = 14 Pin
K = 100 ppm
3 digit significant
F=±1%
M83401
figure, followed
02 = 16 Pin
M = 300 ppm
G=±2%
by a multiplier
J=±5%
10R0 = 10 Ω
3302 = 33 kΩ
1004 = 1 MΩ
Historical Part Number example: M8340101M2201GB (will continue to be accepted)
2201
01
M83401
M
MIL STYLE
1
SPEC SHEET
MIL STYLE
SPEC SHEET
CHARACTERISTIC
RESISTANCE
VALUE
G
B
D
0
4
SCHEMATIC
PACKAGING
A = Isolated
B = Bussed
D04 = Tin/Lead, Tube
DSL = Tin/Lead, Tube,
Single Lot Date Code
G
B
D04
TOLERANCE
SCHEMATIC
PACKAGING
New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format)
M
8
3
4
0
1
0
2
K
A
0
0
RESISTANCE
TOLERANCE
VALUE
Per std. Mil. Spec
F=±1%
M83401
01 = 14 Pin
K = 100 ppm
(see Impedence
G=±2%
02 = 16 Pin
M = 300 ppm
codes table)
J=±5%
Historical Part Number example: M8340102KA001GJ (will continue to be accepted)
M83401
02
K
A001
MIL STYLE
MIL STYLE
www.vishay.com
1
1
SPEC SHEET CHARACTERISTIC
SPEC SHEET
CHARACTERISTIC
RESISTANCE
VALUE
G
J
D
0
4
SCHEMATIC
PACKAGING
J = Dual
Terminator
D04 = Tin/Lead, Tube
DSL = Tin/Lead, Tube,
Single Lot Date Code
G
J
D04
TOLERANCE
SCHEMATIC
PACKAGING
For technical questions, contact: [email protected]
Document Number: 31516
Revision: 08-Jul-08
MDM (Military M83401)
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,
Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
Vishay Dale
DIMENSIONS in inches [millimeters]
0.310 ± 0.010
[7.87 ± 0.254]
TYP 0.030
[0.762]
A ± 0.010 [0.254]
0.250 ± 0.005
[6.35 ± 0.127]
0.120 ± 0.005
[3.05 ± 0.127]
Pin #1
Identification
0.130 + 0.015
- 0.005
[3.30 + 0.381
- 0.127]
Pin #1
0.075 ± 0.015
[1.91 ± 0.381]
0.018 ± 0.003
[0.457 ± 0.076]
0.290 Min.
0.320 Nom.
0.360 Max.
[7.37 Min.
8.13 Nom.
9.14 Max.]
0.100 ± 0.010
[2.54 ± 0.254]
Non-Accumulative Tol.
"C" Spaces
B ± 0.010 [0.254]
VISHAY DALE MODEL
0.010 + 0.005
- 0.002
[0.254 + 0.127
- 0.051]
0.050 ± 0.005
[1.27 ± 0.127]
A
B
C
MDM14
0.750 [19.05]
0.600 [15.24]
6
MDM16
0.850 [21.59]
0.700 [17.78]
7
IMPEDANCE CODES
CODE
R1 (Ω)
R2 (Ω)
CODE
R1 (Ω)
R2 (Ω)
A001
82
130
A010
330
470
A002
120
200
A011
330
680
A003
130
210
A012
1.5K
3.3K
A004
160
260
A013
3K
6.2K
A005
180
240
A014
180
270
A006
180
390
A015
270
270
A007
220
270
A016
560
560
A008
220
330
A017
560
1.2K
A009
330
390
A018
620
2.7K
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
Maximum Operating Voltage
VDC
MDM SERIES
100
Voltage Coefficient of Resistance
Veff
< 50 ppm
Dielectric Strength
VAC
200 per min.
Insulation Resistance
Ω
10 000 M
Operating Temperature Range
°C
- 55 to + 125
Storage Temperature Range
°C
- 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents
Permanency testing per MIL-PRF-83401
Solderability
Per MIL-PRF-83401
Body
Molded epoxy
Terminals
Copper alloy, hot-solder dipped
Document Number: 31516
Revision: 08-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
2
MDM (Military M83401)
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,
Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
Vishay Dale
CIRCUIT APPLICATIONS
01 SCHEMATIC
MDM1401 (M8340101xxxxxxB)
MDM1601 (M8340102xxxxxxB)
13 or 15 resistors with one pin common
The MDMxx01 provides the user with a choice of 13 or 15 nominally
equal resistors, each connected to a common pin. Commonly used in
the following applications:
• • • • • • • •
• MOS/ROM Pull-up/Pull-down
• Open Collector Pull-up
• “Wired OR” Pull-up
• Power Driven Pull-up
MDM1401
Pin #1
MDM1601
03 SCHEMATIC
• TTL Input Pull-down
• Digital Pulse Squaring
• TTL Unused Gate Pull-up
• High Speed Parallel Pull-up
MDM1403 (M8340101xxxxxxA)
MDM1603 (M8340102xxxxxxA)
7 or 8 isolated resistors
The MDMxx03 provides the user with a choice of 7 or 8 nominally
equal resistors, with each resistor isolated from all others. Commonly
used in the following applications:
• “Wired OR” Pull-up
• Long-line Impedance Balancing
• Power Driven Pull-up
• LED Current Limiting
• Power Gate Pull-up
• ECL Output Pull-down
• Line Termination
• TTL Input Pull-down
MDM1403
Pin #1
MDM1603
05 SCHEMATIC
R1
R1
R1
R2
R1
R2
R2
R1
R2
R1
R2
R1
R2
R2
R1
R1
R1
R2 R2
R2
R2
R1
R1
R1
R1
R2
R2
MDM1405 (M8340101xxxxxxJ)
MDM1605 (M8340102xxxxxxJ)
12 or 14 resistor pairs
The MDMxx05 provides the user with a choice of 12 or 14 pairs of
R1/R2 resistor values for pulse squaring and TTL dual-line
terminating requirements.
R2
MDM1405, MDM1605
Pin #1
CAGE CODE: 91637
1.30
MDM 16
MDM 14
1.00
05 Schematic
Power Rating (W)
1.50
03 Schematic
Power Rating (W)
Power Rating (W)
01 Schematic
MDM 16
1.60
MDM 14
1.40
1.00
1.20
MDM 16
MDM 14
1.00
Single Resistor
0.20
Single Resistor
1.40
Single Resistor
0.10
0.05
- 55
Derating
www.vishay.com
3
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
- 55
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
For technical questions, contact: [email protected]
- 55
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
Document Number: 31516
Revision: 08-Jul-08
MDM (Military M83401)
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,
Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
Vishay Dale
PERFORMANCE
MAX. ΔR (Typical Test Lots)
TEST
CONDITIONS
Power Conditioning
1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h ± 4 h at + 25 °C ambient temperature
± 0.50 % ΔR
Thermal Shock
5 cycles between - 65 °C and + 125 °C
± 0.50 % ΔR
Short Time Overload
2.5 x rated working voltage for 5 s
± 0.25 % ΔR (Char. K)
± 0.50 % ΔR (Char. M)
Low Temperature Operation
45 min at full rated working voltage at - 65 °C
± 0.25 % ΔR (Char. K)
± 0.50 % ΔR (Char. M)
Moisture Resistance
240 h with humidity ranging from 80 % RH to 98 % RH
± 0.50 % ΔR
Resistance to Soldering Heat
Leads immersed in + 260 °C solder to within 1/16" of body for 10 s
± 0.25 % ΔR
Shock
Total of 18 shocks at 100 G's
± 0.25 % ΔR
Vibration
12 h at maximum of 20 G's between 10 and 2000 Hz
± 0.25 % ΔR
Load Life
1000 h at + 70 °C, rated power applied 1.5 h “ON”,
0.5 h “OFF” for full 1000 h period
Terminal Strength
4.5 pound pull for 30 s
± 0.25 % ΔR
Insulation Resistance
10 000 MΩ (minimum)
-
Dielectric Withstanding Voltage
No evidence of arcing or damage (200 VRMS for 1 min)
-
Document Number: 31516
Revision: 08-Jul-08
For technical questions, contact: [email protected]
± 0.50 % ΔR (Char. K)
± 2.00 % ΔR (Char. M)
www.vishay.com
4
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages