Coilcraft LPR6235-752RMRC Coupled inductors â lpr6235 Datasheet

Document 752R-1
Coupled Inductors – LPR6235
For Step-Up, Resonant
& Flyback Applications
• Can be used as step-up or flyback transformers in DC-DC
converters or as autotransformers
• Perfect for low voltage step-up in energy harvesting applications
• Selected by Linear Technology for the LTC3108 and LTC3109
Ultralow Voltage Step-Up Converter and Power Managers
These shielded parts are only 3.5 mm high and 6 mm
square. The excellent coupling coefficient (k = 0.95)
makes them ideal for use in a variety of applications.
They can be used as flyback transformers and step-up
pulse transformers.
The high Isat and low DCR ratings of these parts provide
high efficiency and excellent current handling in a rugged, low cost design.
Custom inductance values and turn ratios may be available upon request.
Primary (L1) DCR max
Part
Turns inductance2 (Ohms)
number1
ratio ±20% (µH) L1 L2
SRF
typ3 Isat4
(kHz) (A)
LPR6235-253LMR_ 1 : 10
LPR6235-253PMR_ 1 : 20
LPR6235-123QMR_ 1 : 50
LPR6235-752RMR_ 1 : 90
LPR6235-752SMR_ 1 : 100
1300
580
360
257
230
25
25
12.5
7.5
7.5
0.74
13.7
0.20
72
0.085 200
0.085 285
0.085 340
C
D
VIN
D
1.3
0.7
0.9
1.6
1.6
C
L1
VOUT
Sync
Rectifier
L2
C
1. When ordering, please specify packaging code:
LPR6235-253PMRC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape
(350 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use code
letter D instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (1500 parts per full
reel).
2. Inductance is measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP
4284A LCR meter or equivalent.
3. SRF measured using an Agilent/HP 4191A or equivalent.
4. DC current applied to L1, at which the inductance drops 10% from its value
without current.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Typical Step-Up Converter
+
+
D
L1
VIN
L2
C
VOUT
C
–
PWM
–
Typical Flyback Converter
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 752R-1
Revised 08/06/14
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 752R-2
Step-Up / Flyback Transformers – LPR6235
Dot indicates pin 1
1
0.236 ±0.003
6,00 ±0,08
XXXX
4
L1
L2
3
2
Dash
number
0.138
max
3,50
0.236 ±0.003
6,00 ±0,08
Recommended
Land Pattern
1
3
2
0.167 0.079
4,25 2,00
4
1
inches
mm
45°
typ
0.260
6,60
3
2
0.060
1,52
Dimensions are in
4
0.047
1,2
Core material Ferrite
Weight 460 – 480 mg
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Winding to winding isolation 300 Vrms
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Failures in Time (FIT) 38 per one billion hours
Packaging 350/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
0.079
2,00
0.167
4,25
0.260
6,60
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 752R-2
Revised 08/06/14
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages