TDK MLF1608DR10JTD00 Multilayer ferrite Datasheet

I
N
D
U
C
T
O
R
S
January 2015
Inductors for Standard Circuits
Multilayer Ferrite
MLF Series
MLF1608 Type
MLF1608
1608 [0603 inch]*
* Dimensions Code JIS[EIA]
(2/11)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(3/11)
I
N
D
U
C
T
O
R
S
Inductors for Standard Circuits
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Multilayer Ferrite
Overview of MLF1608 Type
FEATURES
The lineup includes a wide inductance range.
Highly reliable monolithic structure with multilayer integration.
APPLICATION
Smart phones, tablet terminals, tuners, LCD-TVs, PDP-TVs, audio equipment, computers, signal processing for modules etc.
PART NUMBER CONSTRUCTION
MLF
Series name
1608
L×W×H Dimensions
(mm)
1608
1.6×0.8×0.8
D
characteristics
A
C
D
E
47N
△
Inductance
(μH)
0.010
10N
(10nH)
R10
0.1
1R0
1
Inductance
tolerance
J
±5%
K
±10%
M
±20%
T
000
Packaging style
Internal code
T
Taping
000
A00
D00
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
Storage
Type
temperature
temperature
(pieces/reel)
(°C)
(mg)
(°C)
MLF1608
–55 to +125
–55 to +125
4,000
4
In case the product's inductance is 15μH or higher, both Operating and Storage temperature ranges are –40 to +85°C.
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(4/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
Time
T4
t3
250 to 260°C 10s max.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(5/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
0.80±0.15
SHAPE & DIMENSIONS
0.30±0.20
0.30±0.20
0.80±0.15
1.60±0.15
Dimensions in mm
0.8
RECOMMENDED LAND PATTERN
0.6
0.8
0.6
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(6/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
Q
(μH)
0.047
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
Tolerance
±20%
±20%
±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±5%±10%±20%
±10%±20%
±10%±20%
±10%±20%
±10%±20%
±10%±20%
min.
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
35
35
35
35
35
35
35
35
35
35
35
35
30
30
20
20
20
20
20
L, Q measuring
conditions
typ.
20
20
20
25
25
25
25
25
25
25
25
30
30
30
30
50
50
55
55
55
55
60
60
60
60
60
60
55
55
40
40
40
40
40
Frequency
Current
(MHz)
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
4
4
4
2
2
1
1
1
1
1
(mA)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Self-resonant
frequency
DC resistance
Rated
current
(MHz)min.
600
550
500
450
400
350
320
290
260
230
210
190
170
150
130
120
110
100
90
80
70
65
60
55
45
40
35
30
25
22
20
18
15
10
(ȍ )max.
0.20
0.30
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.75
0.85
0.95
1.05
1.25
1.40
0.50
0.65
0.70
0.85
1.00
1.15
1.30
1.45
1.60
1.10
1.30
1.50
1.70
1.80
1.50
1.60
1.70
1.80
2.20
(mA)max.
200
200
200
200
200
200
150
150
150
100
100
100
100
70
70
50
50
50
50
30
30
30
30
30
15
15
10
10
10
2
2
2
2
2
(MHz)typ.
900
700
650
600
550
500
450
400
350
320
290
260
230
210
190
170
150
140
130
120
110
100
90
80
70
60
55
50
45
42
40
38
35
30
(ȍ )typ.
0.10
0.15
0.15
0.20
0.20
0.25
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.65
0.75
0.25
0.25
0.30
0.35
0.45
0.50
0.55
0.65
0.75
0.55
0.65
0.80
1.00
1.20
0.80
0.85
0.90
1.20
1.40
Part No.
MLF1608D47N△T□□□
MLF1608D68N△T□□□
MLF1608D82N△T□□□
MLF1608DR10 △ T □□□
MLF1608DR12 △ T □□□
MLF1608DR15 △ T □□□
MLF1608DR18 △ T □□□
MLF1608DR22 △ T □□□
MLF1608DR27 △ T □□□
MLF1608DR33 △ T □□□
MLF1608DR39 △ T □□□
MLF1608DR47 △ T □□□
MLF1608DR56 △ T □□□
MLF1608DR68 △ T □□□
MLF1608DR82 △ T □□□
MLF1608A1R0 △ T □□□
MLF1608A1R2 △ T □□□
MLF1608A1R5 △ T □□□
MLF1608A1R8 △ T □□□
MLF1608A2R2 △ T □□□
MLF1608A2R7 △ T □□□
MLF1608A3R3 △ T □□□
MLF1608A3R9 △ T □□□
MLF1608A4R7 △ T □□□
MLF1608E5R6 △ T □□□
MLF1608E6R8 △ T □□□
MLF1608E8R2 △ T □□□
MLF1608E100 △ T □□□
MLF1608E120 △ T □□□
MLF1608C150 △ T □□□
MLF1608C180 △ T □□□
MLF1608C220 △ T □□□
MLF1608C270 △ T □□□
MLF1608C330 △ T □□□
The " △ " of the Part Number contains the inductance tolerance code, J (±5%), K (±10%), or M (±20%).
The " □ " of the Part Number contains the internal code (000, A00, or D00), following below.
• In case the inductance tolerance code is J: 000
• In case the inductance tolerance code is M or K (L = 0.047 to 8.2μH or 15 to 22μH): A00
• In case the inductance tolerance code is M or K (L = 10,12,27,33μ): D00
○ Measurement equipment
Measurement item
Product No.
L, Q
4294A+16034G
Self-resonant frequency
E4991A
DC resistance
Type-7561
* Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(7/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100
E6R8
10
E100
Inductance(μH)
A4R7
A3R3
A1R0
1
A2R2
A1R5
DR68
DR47
DR33
DR22
DR15
0.1
DR10
0.01
1
10
100
1000
Frequency(MHz)
100
E120
10
E5R6
E8R2
Inductance(μH)
A3R9
A2R7
A1R2
1
A1R8
DR82
DR56
DR39
DR27
DR18
0.1
DR12
0.01
1
10
100
1000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A+16192A
Agilent Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(8/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100
C330
C270
Inductance(μH)
10
C220
C180
C150
1
0.1
0.1
1
10
100
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
4294A+16034G
Agilent Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(9/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH
70
A3R3
60
A1R0
A1R5
A2R2
50
DR47
40
DR15
Q
DR22
DR33
E6R8
E100
30
DR10
20
DR68
10
0
1
10
100
1000
Frequency(MHz)
70
60
A3R9
A1R2
E8R2
50
E5R6
Q
40
E120
30
A1R8
A2R7
DR12
DR82
DR56 DR18
20
DR39
10
0
DR27
1
10
100
1000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A+16192A
Agilent Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(10/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH
70
60
50
C150
C330
40
Q
C270
30
C180
C220
20
10
0
0.1
1
10
100
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
4294A+16034G
Agilent Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
(11/11)
I
N
D
U
C
T
O
R
S
MLF1608 Type
PACKAGING STYLE
REEL DIMENSIONS
ø60min.
1.0
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
ø21±0.8
ø180±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
Type
MLF1608
A
1.9±0.2
B
1.1±0.2
K
1.1 max.
A
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
K
B
4.0±0.1
2.0±0.05
160min.
Drawing direction
Taping
2.0±0.05
200min.
300min.
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_standard_mlf1608_en.fm
Similar pages