Arch ATC SERIES Fully encapsulated plastic case Datasheet

VER : B_5
update : 2010.07.09
AC-DC Power Module
ATC SERIES
10
Watts
KEY FEATURES
„ Switching Power Module for PCB Mountable
„ Fully Encapsulated Plastic Case
„ Universal Input Range 90-264VAC, 47-440 Hz
„ Regulated Output
„ Low Ripple and Noise
„ Screw Terminal For Optional
„ CE, UL, TUV Approval
„ 2-Years Product Warranty
ELECTRICAL SPECIFICATIONS
Model No.
( Single Output )
ATC-3.3S
10W
Max Output Wattage (W)
Voltage
Input
Output
Protection
Isolation
Environment
Physical
Safety
EMC
ATC-5S
10W
ATC-12S
10W
ATC-15S
10W
ATC-24S
10W
90-264 VAC or 120-370 VDC
Frequency (Hz)
47-440 Hz
Current (Full load)
200 mA max. (115 VAC) / 130 mA max. (230 VAC)
Inrush Current (<2ms)
10 A max. (115 VAC) / 20 A max. (230 VAC)
Leakage Current
0.75 mA max.
External Fuse (recommend)
1.5 A slow blow type
Voltage (V.DC.)
3.3V
Voltage Accuracy
±2%
5V
12V
15V
24V
2000
833
666
426
Current (mA) max
3000
Line Regulation (LL-HL) (typ.)
±0.3%.
Load Regulation (5-100%) (typ.)
±0.5%
Minimum Load
4%
5%
5%
3%
5%
Maximum Capacitive Load
70000 uF
35000 uF
11000 uF
7000 uF
2300 uF
Ripple
<0.2% Vout +40mV max (Vp-p)
Noise
<0.5% Vout +50mV max (Vp-p)
Efficiency
65%
76%
75%
76%
Hold-up Time
15 ms min.
Switching Frequency
100 kHz
71%
Over Power Protection
Hiccup technique, auto-recovery
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup mode, indefinite (automatic recovery)
Input-Output (V.AC)
3000V
Input-FG (V.AC)
1500V
Output-FG (V.AC)
500V
Operating Temperature
-25°C…+70°C (with derating)
Storage Temperature
-40°C…+85°C
Temperature Coefficient
±0.02%/°C
Humidity
95% RH
MTBF
>250,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
2.52 x 1.77 x 0.85 Inches
Case Material
Plastic resin with Fiberglass (flammability to UL 94V-0)
Weight
100 g
Cooling Method
Free air convection
Agency Approvals
UL/cUL, CE, TUV
EMI (Conducted & Radiated Emission)
EN 55022 class B
EMS (Noise Immunity)
EN 50082-1
( 64.0 x 45.0 x 21.5 mm ) Tolerance ±0.5 mm
1.All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor.
VER : B_5
update : 2010.07.09
AC-DC Power Module
ATC SERIES
10
Watts
ELECTRICAL SPECIFICATIONS
Model No.
( Dual Output )
Max Output Wattage (W)
Voltage
Output
Protection
Isolation
Environment
Physical
Safety
EMC
ATC-12D
ATC-15D
8W
10W
10W
90-264 VAC or 120-370 VDC
Frequency (Hz)
Input
ATC-5D
47-440 Hz
Current (Full load)
200 mA max. (115 VAC) / 130 mA max. (230 VAC)
Inrush Current (<2ms)
10 A max. (115 VAC) / 20 A max. (230 VAC)
Leakage Current
0.75 mA max.
External Fuse (recommend)
1.5 A slow blow type
Voltage (V.DC.)
±5V
Voltage Accuracy
±2%
±12V
±15V
±380
±300
Current (mA) max
±800
Line Regulation (LL-HL) (typ.)
±0.3%.
Load Regulation (5-100%) (typ.)
±0.5%
Minimum Load
1%
3%
1%
Maximum Capacitive Load
±22000 uF
±3000 uF
±2000 uF
Ripple
<0.2% Vout +40mV max (Vp-p)
Noise
<0.5% Vout +50mV max (Vp-p)
Efficiency
73%
75%
74%
Hold-up Time
15 ms min.
Switching Frequency
100 kHz
Over Power Protection
Hiccup technique, auto-recovery
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup mode, indefinite (automatic recovery)
Input-Output (V.AC)
3000V
Input-FG (V.AC)
1500V
Output-FG (V.AC)
500V
Operating Temperature
-25°C…+70°C (with derating)
Storage Temperature
-40°C…+85°C
Temperature Coefficient
±0.02%/°C
Humidity
95% RH
MTBF
>250,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
2.52 x 1.77 x 0.85 Inches
Case Material
Plastic resin with Fiberglass (flammability to UL 94V-0)
Weight
100 g
Cooling Method
Free air convection
Agency Approvals
UL/cUL, CE, TUV
EMI (Conducted & Radiated Emission)
EN 55022 class B
EMS (Noise Immunity)
EN 50082-1
( 64.0 x 45.0 x 21.5 mm ) Tolerance ±0.5 mm
1.All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor.
VER : B_5
update : 2010.07.09
AC-DC Power Module
ATC SERIES
MECHANICAL DIMENSION
BLOCK DIAGRAM
10
Watts
( Top View )
PIN#
SINGLE
Dual
1
FG
FG
2
AC IN (N)
AC IN (N)
3
AC IN (L)
AC IN (L)
4
-DC OUT
-DC OUT
5
NO PIN
COMMON
6
+DC OUT
+DC OUT
DERATING
VER : B_5
update : 2010.07.09
AC-DC Power Module
ATC SERIES
10
SCREW TERMINAL
ATC-A2
PIN#
Single
Dual
1
FG
FG
2
AC IN (N)
AC IN (N)
3
AC IN (L)
AC IN (L)
4.
NO CONNECT
NO CONNECT
5
-DC OUT
-DC OUT
6
NO CONNECT
COMMON
7
+DC OUT
+DC OUT
8
NO CONNECT
NO CONNECT
PIN#
Single
Dual
1
AC IN
FG
2
NO CONNECT
NO CONNECT
3
-DC OUT
-DC OUT
4.
NO CONNECT
COMMON
5
+DC OUT
+DC OUT
6
NO CONNECT
NO CONNECT
ATC-A4
Watts
VER : B_5
update : 2010.07.09
AC-DC Power Module
ATC SERIES
10
ATC-A5
PIN#
Single
Dual
1
FG
FG
2
AC IN (N)
AC IN (N)
3
AC IN (L)
AC IN (L)
4.
NO CONNECT
NO CONNECT
5
-DC OUT
-DC OUT
6
NO CONNECT
COMMON
7
+DC OUT
+DC OUT
8
NO CONNECT
NO CONNECT
PIN#
Single
Dual
1
AC IN
FG
2
NO CONNECT
NO CONNECT
ATC-A7
3
-DC OUT
-DC OUT
4.
NO CONNECT
COMMON
5
+DC OUT
+DC OUT
6
NO CONNECT
NO CONNECT
Watts
Similar pages