FDH 400 / FDLL 400 High Voltage General Purpose Diode Cathode Band LL-34 COLOR BAND MARKING DEVICE 1ST BAND FDLL400 BLACK SOD80 LL-34 DO-35 THE PLACEMENT OF THE EXPANSION GAP HAS NO RELATIONSHIP TO THE LOCATION OF THE CATHODE TERMINAL Cathode is denoted with a black band -1st band denotes cathode terminal and has wider width Absolute Maximum Ratings(1) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol WIV Parameter Value Units Working Inverse Voltage 150 V IO Average Rectified Forward Current 200 mA IF DC Forward Current 500 mA if Recurrent Peak Forward Current IFSM Non-repetitive Peak Forward Surge Current TSTG Storage Temperature Range 600 mA Pulse Width = 1.0 s 1.0 A Pulse Width = 1.0 μs 4.0 A -65 to +200 °C Operating Junction Temperature 175 TJ Note: 1. These ratings are limiting values above which the serviceability of the diode may be impaired. These ratings are bansed on a maximum junction temperature of 200°C. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. °C Thermal Characteristics Values are at TA = 25°C unless otherwise noted. Symbol PD RθJA Max. Parameter FDH / FDLL 400 Units Power Dissipation 500 mW Derate above 25°C 3.33 mW/°C Thermal Resistance, Junction to Ambient 300 °C/W © 1997 Fairchild Semiconductor Corporation FDH 400 / FDLL 400 Rev. 1.1.0 www.fairchildsemi.com 1 FDH 400 / FDLL 400 — High Voltage General Purpose Diode April 2013 Values are at TA = 25°C unless otherwise noted. Symbol Parameter Test Conditions VR Breakdown Voltage FDH / FDLL 400 IR= 100 μA VF Forward Voltage FDH / FDLL 400 IR Reverse Leakage FDH / FDLL 400 CO Diode Capacitance FDH / FDLL 400 VR = 0, f = 1.0 MHz trr Reverse Recovery Time FDH / FDLL 400 © 1997 Fairchild Semiconductor Corporation FDH 400 / FDLL 400 Rev. 1.1.0 Min. Max. 200 Units V IF= 200 mA 1.0 V IF= 300 mA 1.1 V VR= 150 V 100 nA VR= 150 V, TA= 150°C 100 μA 2.0 pF 50 ns IF = IR = 30 mA, Irr = 3.0 mA, RL = 100 Ω www.fairchildsemi.com 2 FDH 400 / FDLL 400 — High Voltage General Purpose Diode Electrical Characteristics FDH 400 / FDLL 400 — High Voltage General Purpose Diode Physical Dimensions SOD-80 0.50 0.30 C R 0.30 0.20 1.50 1.30 2.64 REF 3.60 3.30 NOTES: UNLESS OTHERWISE SPECIFIED A) PACKAGE STANDARD REFERENCE: JEDEC DO-213, VARIATION AC. B) ALL DIMENSIONS ARE IN MILLIMETERS. C CORNER RADIUS IS OPTIONAL. D) DRAWING FILE NAME: SOD80A REV01 Figure 1. 2-TERMINAL, SOD-80, JEDEC DO-213AC, MINI-MELF Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/packaging/tr/SOD80A_tnr.pdf. © 1997 Fairchild Semiconductor Corporation FDH 400 / FDLL 400 Rev. 1.1.0 www.fairchildsemi.com 3 FDH 400 / FDLL 400 — High Voltage General Purpose Diode Physical Dimensions (Continued) DO-35 25.40 MIN (2X) 4.56 3.05 0.533 0.460 1.91 1.53 NOTES: UNLESS OTHERWISE SPECIFIED A) PACKAGE STANDARD REFERENCE: JEDEC DO-204, VARIATION AH. B) HERMETICALLY SEALED GLASS PACKAGE. C) PACKAGE WEIGHT IS 0.137 GRAM. D) ALL DIMENSIONS ARE IN MILLIMETERS. E) DRAWING FILE NAME: DO35AREV02 Figure 2. AXIAL LEADED, GLASS, JEDEC DO204, VARIATION AH (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 1997 Fairchild Semiconductor Corporation FDH 400 / FDLL 400 Rev. 1.1.0 www.fairchildsemi.com 4 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. FPS¥ F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ mWSaver¥ OptoHiT¥ OPTOLOGIC® OPTOPLANAR® 2Cool¥ AccuPower¥ AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ Sync-Lock™ ® PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ ®* TinyBoost¥ TinyBuck¥ TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* PSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support, device, or 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain system whose failure to perform can be reasonably expected to life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I64 © Fairchild Semiconductor Corporation www.fairchildsemi.com