HP HLMP-1520-IO000 T-1 (3 mm) high intensity led lamp Datasheet

T-1 (3 mm) High Intensity
LED Lamps
Technical Data
Features
• High Intensity
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
• Popular T-1 Diameter
Package
• Selected Minimum
Intensities
• Narrow Viewing Angle
Package Dimensions
HLMP-132x Series
HLMP-142x Series
HLMP-152x Series
•
•
•
•
General Purpose Leads
Reliable and Rugged
Available on Tape and Reel
For more information,
please refer to Tape and
Reel Option Data Sheet
Description
This family of T-1 lamps is
specially designed for applications requiring higher on-axis
intensity than is achievable with a
standard lamp. The light
generated is focused to a narrow
beam to achieve this effect.
Selection Guide
Part
Number
HLMP-1320-G00xx
HLMP-1320 GH0xx
HLMP-1321
HLMP-1321-G00xx
HLMP-1321-HI0xx
HLMP-1420
HLMP-1420-F00xx
HLMP-1421
HLMP-1421-F00xx
HLMP-1421-FG0xx
HLMP-1520
HLMP-1520-E00xx
HLMP-1521
HLMP-1521-E00xx
HLMP-1521-EF0xx
Package
Description
Untinted,
Nondiffused
Tinted,
Nondiffused
Color
High
Efficiency
Red
Microtinted,
Nondiffused
Yellow
Tinted,
Nondiffused
Microtinted,
Nondiffused
Tinted,
Nondiffused
Green
Luminous Intensity
Iv (mcd) @ 10 mA
Min.
Max.
8.6
–
8.6
27.6
8.6
–
8.6
–
13.8
44.0
9.2
–
9.2
–
9.2
–
9.2
–
9.2
29.4
6.7
–
6.7
–
6.7
–
6.7
–
6.7
21.2
2
Part Numbering System
HLMP - 1 x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1: Right Angle Housing, Uneven Leads
A2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Lens Options
20: Untinted or Microtinted, Non-diffused
21: Tinted, Non-diffused
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
1: T-1 (3 mm)
Absolute Maximum Ratings at TA = 25°C
Parameter
Red
Yellow
Green
Units
Peak Forward Current
90
60
90
mA
Average Forward Current[1]
25
20
25
mA
30
20
30
mA
135
85
135
mW
5
5
5
V
Transient Forward Current[4]
(10 µsec Pulse)
500
500
500
mA
LED Junction Temperature
110
110
110
°C
-55 to +100
-55 to +100
-20 to +100
°C
DC
Current[2]
Power
Dissipation[3]
Reverse Voltage (I R = 100 µA)
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
-55 to +100
260°C for 5 seconds
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at
1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
3
Electrical Characteristics at TA = 25°C
Symbol
IV
Description
Luminous Intensity
2θ1/2
Including Angle Between
Half Luminous Intensity
Points
λPEAK
Peak Wavelength
∆λ 1/2
λd
τs
C
RθJ-PIN
VF
Spectral Line Halfwidth
Dominant Wavelength
Speed of Response
Capacitance
Thermal Resistance
Forward Voltage
VR
Reverse Breakdown
Voltage
ηV
Luminous Efficacy
Device
HLMP-
Min.
Typ.
1320
1321
8.6
8.6
30
30
mcd
IF = 10 mA
(Figure 3)
1420
1421
9.2
9.2
15
15
mcd
IF = 10 mA
(Figure 8)
1520
1521
6.7
6.7
22
22
mcd
IF = 10 mA
(Figure 3)
All
45
Deg.
IF = 10 mA
See Note 1
(Figures 6, 11, 16, 21)
132x
635
nm
142X
152X
583
565
132x
40
142X
152X
36
28
132x
626
142X
152X
585
569
132x
90
142X
152X
90
500
132x
11
142X
152X
15
18
All
290
132x
1.9
2.4
142X
152X
2.0
2.1
2.4
2.7
All
5.0
Max.
Units
Test
Conditions
Measurement
at Peak (Figure 1)
nm
nm
See Note 2 (Figure 1)
ns
pF
°C/W
VF = 0; f = 1 MHz
Junction to
Cathode Lead
V
IF = 10 mA
V
IR = 100 µA
132x
145
lumens
142X
152X
500
595
Watt
See Note 3
Notes:
1. θ1/ 2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = lv/ηv, where lv is the luminous intensity in candelas
and ηv is the luminous efficacy in lumens/watt.
4
Figure 1. Relative Intensity vs. Wavelength.
T-1 High Efficiency Red Non-Diffused
Figure 2. Forward Current vs.
Forward Voltage Characteristics.
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 4. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak LED Current.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDC MAX
as per MAX Ratings).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
5
T-1 Yellow Non-Diffused
Figure 7. Forward Current vs.
Forward Voltage Characteristics.
Figure 8. Relative Luminous Intensity
vs. Forward Current.
Figure 9. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak Current.
Figure 10. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDC MAX
as per MAX Ratings).
Figure 11. Relative Luminous Intensity vs. Angular Displacement.
6
T-1 Green Non-Diffused
Figure 12. Forward Current vs.
Forward Voltage Characteristics.
Figure 13. Relative Luminous
Intensity vs. Forward Current.
Figure 14. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak LED Current.
Figure 15. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDCMAX
as per MAX Ratings).
Figure 16. Relative Luminous Intensity vs. Angular Displacement.
7
Intensity Bin Limits
Color
Red
Yellow
Bin
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
Intensity Range (mcd)
Min.
Max.
9.7
15.5
15.5
24.8
24.8
39.6
39.6
63.4
63.4
101.5
101.5
162.4
162.4
234.6
234.6
340.0
340.0
540.0
540.0
850.0
850.0
1200.0
1200.0
1700.0
1700.0
2400.0
2400.0
3400.0
3400.0
4900.0
4900.0
7100.0
7100.0
10200.0
10200.0
14800.0
14800.0
21400.0
21400.0
30900.0
10.3
16.6
16.6
26.5
26.5
42.3
42.3
67.7
67.7
108.2
108.2
173.2
173.2
250.0
250.0
360.0
360.0
510.0
510.0
800.0
800.0
1250.0
1250.0
1800.0
1800.0
2900.0
2900.0
4700.0
4700.0
7200.0
7200.0
11700.0
11700.0
18000.0
18000.0
27000.0
Intensity Bin Limits, continued
Color
Green
Bin
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
Intensity Range (mcd)
Min.
Max.
7.6
12.0
12.0
19.1
19.1
30.7
30.7
49.1
49.1
78.5
78.5
125.7
125.7
201.1
201.1
289.0
289.0
417.0
417.0
680.0
680.0
1100.0
1100.0
1800.0
1800.0
2700.0
2700.0
4300.0
4300.0
6800.0
6800.0
10800.0
10800.0
16000.0
16000.0
25000.0
25000.0
40000.0
Maximum tolerance for each bin limit is ± 18%.
Color Categories
Color
Category #
6
5
4
3
2
1
3
2
4
5
Green
Yellow
Lambda (nm)
Min.
Max.
561.5
564.5
564.5
567.5
567.5
570.5
570.5
573.5
573.5
576.5
582.0
584.5
584.5
587.0
587.0
589.5
589.5
592.0
592.0
593.0
Maximum tolerance for each bin limit is ± 0.5 nm.
Mechanical Option Matrix
Mechanical Option Code
Definition
00
Bulk Packaging, minimum increment 500 pcs/bag
01
Tape & Reel, crimped leads, minimum increment 1800 pcs/bag
02
Tape & Reel, straight leads, minimum increment 1800 pcs/bag
A1
Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
A2
Right Angle Housing, even leads, minimum increment 500 pcs/bag
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
June 11, 2001
Obsoletes 5968-4163E (11/99)
5988-0931EN
Similar pages