Astrodyne AHP1501-11 15w medical power adapters with interchangeable input plug Datasheet

medical
FEATURES:
AHP1501
15W Me d i c a l P o wer A dapt ers w i t h I nt erch a n g e a b le In p u t Plu g s
RoHS
2
2011/65/EU
series
Wide Input Range of 80 to 275VAC, 47 to 63 Hz.
Interchangeable Input Plugs
medical
IEC60601-1 3rd Edition, 2 MOPP
APPLICATIONS:
Class II
HPU63B series
63
TheLevel
HPU63B
Efficiency
V series of AC/DC switching mode power supplies
2.36”
APPROVALS:
IP22
x 1.71” x 1.58”
CB
IP22
Model Symbol Output Characteristic
Output
Output
Number Vins Watts
Voltage Amps
Efficiency
Condition Total
Input NL
Power Consumption Regulation
AHP1501-01
Po
AHP1501-02
Iil
AHP1501-03
Iih
Irl
AHP1501-04
Irh
AHP1501-05
AHP1501-06
△Voi
AHP1501-07
OLP
AHP1501-08
ttr
AHP1501-09
thu
AHP1501-10
ts
AHP1501-11
Tc
AHP1501-12
HV
0.2 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
0.3 Watts
Vin
Fi
7.2
12
12
13.5
15
Efficiency
15
15
15
15
15
15
15
3.3VDC
5VDC
6VDC
9VDC
12VDC
15VDC
18VDC
24VDC
30VDC
36VDC
48VDC
55VDC
2.18
2.4
2.0
1.5
1.25
1.0
0.83
0.62
0.5
0.41
0.31
0.27
FEATU
provide 63 Watts of continuous output power . All supplies are
UL94V-1 min compliant. All models meet FCC Part-18 class B and
CISPR-11 EN55011 class B emission Limits and are designed to
comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN
60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements.
Cooling
All units are 100% burned in and tested.
65%
80%
81%
83%
84%
85%
86%
86%
86%
86%
86%
86%
Ripple
& Noise
Min.
100
RoHS2
2011/65/EU
* Wide O
* IEC-32
* Single
* Over V
* Medic
* Input t
* Energy
* Class II
* 3 year
Typ. Max. Unit
APPLIC
240 VAC
* Home
80
275
47
63
VAC * Patien
Hz * Blood
* Portab
W * ECG m
A
A GENER
A * Short C
* Coolin
A * Flamm
±5%
66mV p-p
15
±5%
50mV p-p
0.6
±5%
70mV p-p
0.4
APPROVALS:
35
±5%
90mV p-p
85
±5%
100mV p-p
* Protec
±5%
100mV p-p
1
% * Safety
±5%
100mV p-p
(TUV/T-m
Electrical ±5%
Characteristics:
%
110
150
100mV p-p
ms
4
Symbol
Characteristic
±3%
100mV p-p
ms
Safety Approval Input Voltage Range 12Safety Approval & Specification
i
Vins
±3%
100mV p-p
s
0.3
2
Input Operate Voltage Range
Detail to see Fig.1 (Derate linearly
Vin
±3%
100mV p-p
Input Frequency
Sine wave ±0.04 %/°C
Fi
±3%
Output
Power Range 100mV p-p 4000
See Rating Chart VAC
Po
CB
EN 60601-1
PS
E
IEC 60601-1
Iil
Low Line Input Current
B Full Load, Vin=100VAC
Class
Environmental:
Iih
High Line Input Current
Full Load, Vin=240VAC
Irl
Low Line Input Inrush Current
Full Load, 25°C, Cool start, Vin=1
Symbol
High Line Input Inrush Current
Irh
Condition
Load, 25°C,
start, Vin=2
Max.Cool
Unit
Min.Full Typ.
EMI
Characteristic
Efficiency
To
Ts
non-condensing
Ho
Hs
Vsg
ESDa
ESDc
MTBF
ELEV
WWW.ASTRODYNETDI.COM
VBR
Vibration
△Voi
Line Regulation
OVP
Over Voltage Protection
OLP
Over Load Protection
°C Detail to
-10Full Load, Vin=230VAC,
70
Full
Load,
Vin=100~120VAC
or 20
-40
85
°C
95% RH
0 Recovers automatically
95% RH after fau
Full
Load,
Vin=110VAC
kV
2
0
ttr
Time of Transient Response
thu
Hold-Up Time
ts
Start-up time
Tc
HV
Temperature Coefficient
All Condition
100k
h
Secondary,
Dielectric Withstanding Voltage (P-S) Primary to 3000
m limit curre
EMI
EMC Emission
8 Full Load, Vin=100VAC
kV
6 Full Load, Vin=100~240VAC
kV
Compliance to EN55011
ASTRODYNE USA: 51-800-823-8082
G (CISPR1
ASTRODYNE PACIFIC: 886-2-26983458
Environmental:
Symbol
Characteristic
15W Me d i c a l P o wer A dapt ers w i t h I nt erch a n g e a b le In p u t Plu g s
INPUT SPECIFICATIONS
Input Voltage Range
Frequency Range (Sine Wave)
Input Current
Inrush Current, typ (Cold Start)
Protection Class
Input NL Power Consumption
80-275 VAC (100-240V Nominal)
See Input Derate curve, Fig. 1
47-63 Hz
Low Line (100VAC)
0.6A max.
High Line (240VAC)
0.4A max.
Low Line (100VAC)
35A max.
High Line (240VAC)
85A max.
Double Insulated, Class II
See Selection Chart
See Selection Chart
0 to FL Rating
See Selection Chart
± 1%, max.
110-150%, auto recover
Auto Recover
110Vin, FL
4mS
±0.04%/°C, typ
See Selection Chart
100Vin, FL
2S max. / 12mS min.
GENERAL SPECIFICATIONS
Input-Out Isolation
Efficiency (FL, Nom. Input))
Safety
4000 VAC
See Selection Chart
ANSI/AAMI ES 60601-1:2005
(UL/cUL 3rd Edition)
Oper. Temperature
Storage Temperature
Operating/Storage Humidity
Cooling
EMC
Surge Voltage
ESD Air
ESD Contact
MTBF MIL-HDBK-217F, 25°C
Operating Altitude
Vibration
Flammability Rating
-10 to +40°C (FL) *
50% Load @ 70°C
See Output Derate Curve, Fig. 2
-40 to +85°C *
0% to 95% RH *
Free Air Convection
EN55011 (CISPR11),
EN61000-3-2,-3 Class B
2kV, All Conditions
8kV, IEC61000-4-2
6kV, IEC61000-4-2
100K h
3000m
5G, 10~500Hz, 10 min./1 cycle,
60 min. each along X, Y, Z axes
UL94V-1
NOTES
1. Line Regulation defined as changing the input voltage ±10% from
nominal line at rated load.
2. Total Regulation is defined by as changing the load ±40% from 60%
rated load.
3. Ripple & Noise is measured by using a 20MHz bandwidth limited
oscilloscope and terminating the output with a 0.47uF capacitor at
rated load and nominal line.
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
PHYSICAL SPECIFICATIONS
Size
Construction
Weight
series
ENVIRONMENTAL SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage and Current
Output Power Range
Total Regulation (Note 2)
Line Regulation, FL (Note 1)
Over Load Protection*
Short Circuit Protection
Transient Response
Temperature Coefficient
Ripple/Noise (Note 3)
Start Up / Hold Up Time
AHP1501
2.36” x 1.71” x 1.58”
(60 x 43.4 x 40.1mm)
Wallmount Style
5.82oz (165g)
All specifications are typical at nominal input, full load, and 25°C unless otherwise noted
WWW.ASTRODYNETDI.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
50
rated load and nominal line.
6. Hold up time is measured from the end of the last charging pulse to the
time which the main output drops down to low limit of main output at
rated load and nominal line.
7. Efficiency is measured at rated load, and nominal line.
8. The specifics for testing the energy efficiency of this Series are outlined
in a separate document titled "Test Method for Calculating the Energy
Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power
Supplies (August 11, 2004)," which is available on the ENERGY STAR
Website.
80
100
120
140
160
180
200
220
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
240
260
280
110
100
90
80
70
60
AHP1501
50
40
15W Me d i c a l P o wer A dapt ers w i t h I nt erch a n g e a b le In p u t Plu g s
30
20
series
10
MECHANICAL DIMENSIONS
0
-10
MECHANICAL DIMENSIONS: ( UNIT: mm )
0
10
20
30
40
50
TEMPERATURE (°C)
(FIG.2) TEMPERATURE DERATING CURVE
60
70
80
OUTPUT CABLE RECOMMEND :
1. Selected output connectors and wire, please refer to Appendix.
2. HPU15-102~104 are required to use AWG#18/4FT output cable.
3. HPU15-105~109 are required to use AWG#20/4FT output cable.
4. HPU15-110~111
required to use AWG#22/4FT output cable.
DC OUTPUTare
CONNECTIONS
5. The regulation and efficiency will be changed by modified output cable.
Coaxial Plug:
-Vout
+Vout
PACKING :
5.5mm
outer165g
diameter
1. Net
weight:
approx.
2.1mm inner
diameter,
femaleavailable contact sales for details.
2. Optional
output
connectors
11mm length, center “+”
Dimensions are in mm [inches]
Rating Chart:
DERATE CURVES
15 series
HPU15-103
HPU15-102
min
1.44
2.40
7.2
The Regulation and Efficiency will change if output
(VDC)is modified. (A)
(A)
(W)
cable
(VDC)
3.0
(mVp-p)
(%)
(%)
(W)
(ms)
66
±5
65
0.2
12
OLP
50
±5
80
0.3
12
OLP
8.0
1.50
1.84
12
70
±5
81
0.3
12
OLP
5.99
2.00
2.40
15W5.0
Interchangeable
Medical
Grade
Power 12
Supply
6.5
Protection Mode
4.99
Hold-Up Time
HPU15-101
No Load
Consumption
Maximum
Output Power
MODEL NO.
dical
Typ. Efficiency
max
Total Regulation
min
Ripple & Noise
max
Output
Current
AHP1501-01~04 Output
Cord
Length 48”, 18AWG
(Based
on the
AHP1501-05~09
Output
Cordoutput
Lengthvolt.)
48”, 20AWG
AHP1501-110~112 Output Cord Length 48”, 22AWG
Voltage Range
HPU15-104
8.0
110
11.0
1.22
1.68
13.5
90
±5
83
0.3
12
OLP
eak load when the power supply HPU15-105
starts up.
than rated load is not allowed.
HPU15-106
condition, each output is checked
to be
11.0
100
13.0
1.15
1.36
15
100
±5
84
0.3
12
OLP
16.0
0.94
1.15
15
100
±5
85
0.3
12
OLP
21.0
0.72
0.94
15
100
±5
86
0.3
12
OLP
27.0
0.55
0.72
15
100
±5
86
0.3
12
OLP
33.0
0.45
0.55
15
100
±3
86
0.3
12
OLP
40.0
0.37
0.45
15
100
±3
86
0.3
12
OLP
48.0
0.32
0.37
15
100
±3
86
0.3
12
OLP
55.0
100
0.28
160
0.32
200
240 15
100
280
±3
86
0.3
12
OLP
90
16.0
LOAD (%)
HPU15-107
changing ±10% of input voltage from
13.0
HPU15-108
21.0
HPU15-109
y changing ±40% of measured output
load
27.0
HPU15-110
33.0
by using 20MHz bandwidth limited
HPU15-111
d each output with a 0.47uF capacitor
at
.
HPU15-112
om the end of the last charging pulse to the
t drops down to low limit of main output at
.
ed load, and nominal line.
energy efficiency of this Series are outlined
ed "Test Method for Calculating the Energy
Interchangeable AC-DC and AC-AC Power
" which is available on the ENERGY STAR
80
70
60
40.0
48.0
50
80
120
140
180
220
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
260
110
100
90
80
70
60
50
40
30
20
10
0
-10
ENSIONS: ( UNIT: mm )
WWW.ASTRODYNETDI.COM
0
10
20
30
40
50
TEMPERATURE (°C)
(FIG.2) TEMPERATURE DERATING CURVE
60
70
80
OUTPUT CABLE RECOMMEND :
1. Selected output connectors and wire, please refer to Appendix.
2. HPU15-102~104 are required to use AWG#18/4FT output cable.
3. HPU15-105~109 are required to0315
use AWG#20/4FT output cable.
4. HPU15-110~111 are required to use AWG#22/4FT output cable.
5. The regulation and efficiency will be changed by modified output cable.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Similar pages