Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to [email protected]. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FOD8342, FOD8342T 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Features Description • FOD8342T - 8 mm Creepage and Clearance Distance, and 0.4 mm Insulation Distance to Achieve Reliable and High-Voltage Insulation • 3.0 A Peak Output Current Driving Capability for Medium- Power IGBT/MOSFET – Use of P-Channel MOSFETs at Output Stage Enables Output Voltage Swing Close to Supply Rail • 20 kV/s Minimum Common Mode Rejection • Wide Supply Voltage Range: 10 V to 30 V • Fast Switching Speed Over Full Operating Temperature Range – 210 ns Maximum Propagation Delay – 65 ns Maximum Pulse Width Distortion • Under-Voltage Lockout (UVLO) with Hysteresis • Extended Industrial Temperate Range: -40°C to 100°C • Safety and Regulatory Approvals: – UL1577, 5,000 VRMS for 1 Minute – DIN EN/IEC60747-5-5, 1,140V Peak Working Insulation Voltage The FOD8342 series is a 3.0 A output current gate drive optocoupler, capable of driving medium-power IGBT/ MOSFETs. It is ideally suited for fast-switching driving of power IGBT and MOSFET used in motor-control inverter applications, and high-performance power systems. The FOD8342 series utilizes stretched body package to achieve 8 mm creepage and clearance distances (FOD8342T), and optimized IC design to achieve reliably high-insulation voltage and high-noise immunity. The FOD8342 series consists of an Aluminum Gallium Arsenide (AlGaAs) Light-Emitting Diode (LED) optically coupled to an integrated circuit with a high-speed driver for push-pull MOSFET output stage. The device is housed in a stretched body, 6-pin, small outline, plastic package. Functional Schematic 6 VDD ANODE 1 Applications • • • • • AC and Brushless DC Motor Drives Industrial Inverter Uninterruptible Power Supply Induction Heating Isolated IGBT/Power MOSFET Gate Drive Related Resources 5 VO 2 CATHODE 3 4 VSS Figure 1. Schematic • FOD3182, 3 A Output Current, High Speed MOSFET Gate Drive Optocoupler • FOD8314, FOD8314T, 1.0 A Output Current, Gate Drive Optocoupler in Stretched Body SOP 6-Pin • www.fairchildsemi.com/products/optoelectronics/ Figure 2. Package Outline ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin March 2016 LED VDD – VSS “Positive Going” (Turn-on) Off 0 V to 30 V 0 V to 30 V LOW On 0 V to 7 V 0 V to 6.5 V LOW On 7 V to 9.5 V 6.5 V to 9 V Transition On 9.5 V to 30 V 9 V to 30 V HIGH VDD – VSS “Negative Going” (Turn-off) VO Pin Definitions Pin # Name Description 1 ANODE 2 N.C 3 CATHODE 4 VSS Negative Supply Voltage 5 VO Output Voltage 6 VDD Positive Supply Voltage LED Anode Not Connection LED Cathode Pin Configuration ANODE N.C 1 6 2 5 3 4 CATHODE VDD VO VSS Figure 3. Pin Configuration ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 2 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Truth Table As per DIN EN/IEC60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Characteristics Parameter Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage FOD8342 FOD8342T < 150 VRMS I–IV I–IV < 300 VRMS I–IV I–IV < 450 VRMS I–III I–IV < 600 VRMS I–III I–III 40/100/21 40/100/21 Climatic Classification Pollution Degree (DIN VDE 0110/1.89) Comparative Tracking Index Symbol VPR 2 2 175 175 Value Parameter Unit FOD8342 FOD8342T Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1,671 2,137 Vpeak Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 1,426 1,824 Vpeak 891 1,140 Vpeak VIORM Maximum Working Insulation Voltage VIOTM Highest Allowable Over-Voltage 6,000 8,000 Vpeak External Creepage 8.0 8.0 mm External Clearance 7.0 8.0 mm Distance Through Insulation (Insulation Thickness) 0.4 0.4 mm DTI Safety Limit Values – Maximum Values Allowed in the Event of a Failure, Case Temperature 150 150 °C IS,INPUT Input Current 200 200 mA PS,OUTPUT Output Power 600 600 mW 109 109 TS RIO Insulation Resistance at TS, VIO = 500 V ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 3 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Value Unit TSTG Storage Temperature -40 to +125 °C TOPR Operating Temperature -40 to +100 °C Junction Temperature -40 to +125 °C 260 for 10 sec °C TJ TSOL Parameter Lead Solder Temperature (Refer to Reflow Temperature Profile) IF(AVG) Average Input Current 25 mA VR Reverse Input Voltage 5.0 V 3 A IO(PEAK) VDD VO(PEAK) tR(IN), tF(IN) PDI PDO Peak Output Current(1) Supply Voltage -0.5 to 35 V Peak Output Voltage 0 to VDD V 250 ns 45 mW 500 mW Input Signal Rise and Fall Time Input Power Dissipation(2)(4) Output Power Dissipation(3)(4) Notes: 1. Maximum pulse width = 10 s, maximum duty cycle = 0.2%. 2. No derating required across operating temperature range. 3. Derate linearly from 25°C at a rate of 5.2 mW/°C. 4. Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected to conditions outside these ratings. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol TA VDD – VSS Parameter Min. Max. Unit Ambient Operating Temperature -40 +100 °C Supply Voltage 10 30 V IF(ON) Input Current (ON) 10 16 mA VF(OFF) Input Voltage (OFF) -3.0 0.8 V ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 4 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Absolute Maximum Ratings (TA = 25°C unless otherwise specified.) Apply over all recommended conditions, typical value is measured at TA = 25°C. Symbol Parameter Conditions VISO Input-Output Isolation Voltage TA = 25°C, R.H. < 50%, t = 1.0 minute, II-O 20 A(5)(6) RISO Isolation Resistance VI-O = 500 V(5) CISO Isolation Capacitance Min. Typ. Max. 5000 (5) VI-O = 0 V, Frequency = 1.0 MHz Unit VACRMS 1011 1 pF Notes: 5. Device is considered a two terminal device: pins 1, 2 and 3 are shorted together and pins 4, 5 and 6 are shorted together. 6. 5,000 VACRMS for 1 minute duration is equivalent to 6,000 VACRMS for 1 second duration. Electrical Characteristics Apply over all recommended conditions, typical value is measured at VDD = 30 V, VSS = Ground, TA = 25°C unless otherwise specified. Symbol VF Parameter Conditions Input Forward Voltage (VF/TA) Temperature Coefficient of Forward Voltage IF = 10 mA BVR Input Reverse Breakdown Voltage IR = 10 A CIN Input Capacitance Min. Typ. Max. Unit 1.1 1.5 1.8 V -1.8 mV/°C 5.0 f = 1 MHz, VF = 0 V V 20 pF VOH = VDD – 3 V 1.0 A VOH = VDD – 6 V 2.5 A VOL = VSS + 3 V 1.0 A IOH High Level Output Current(1) IOL Low Level Output Current(1) VOH High Level Output Voltage(7)(8) IF = 10 mA, IO = -100 mA VOL Low Level Output Voltage(7)(8) IF = 0 mA, IO = 100 mA IDDH High Level Supply Current VO = Open, IF = 10 to 16 mA 2.9 4.0 mA IDDL Low Level Supply Current VO = Open, VF = -3.0 to 0.8 V 2.8 4.0 mA IFLH Threshold Input Current Low to IO = 0 mA, VO > 5 V High 2.0 7.5 mA VFHL Threshold Input Voltage High to IO = 0 mA, VO < 5 V Low VUVLO+ VUVLO- UnderVoltage Lockout Threshold UVLOHYS UnderVoltage Lockout Threshold Hysteresis VOL = VSS + 6 V 2.5 A VDD – 0.5 VDD – 0.1 V VSS + 0.1 VSS + 0.5 0.8 V V IF = 10 mA, VO > 5 V 7.0 8.3 9.5 V IF = 10 mA, VO < 5 V 6.5 7.7 9.0 V 0.6 V Notes: 7. In this test, VOH is measured with a dc load current of 100 mA. When driving capacitive load VOH will approach VDD as IOH approaches 0 A. 8. Maximum pulse width = 1 ms, maximum duty cycle = 20%. ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 5 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Isolation Characteristics Apply over all recommended conditions, typical value is measured at VDD = 30V, VSS = Ground, TA = 25°C unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit tPHL Propagation Delay Time to Logic Low Output(9) 50 145 210 ns tPLH Propagation Delay Time to Logic High Output(10) 50 120 210 ns PWD Pulse Width Distortion(11) | tPHL – tPLH | 35 65 ns PDD (Skew) IF =10 mA, Rg = 10 , Cg = 10 nF, Propagation Delay Difference f = 250 kHz, Between Any Two Parts(12) Duty Cycle = 50% -90 90 tR Output Rise Time (10% to 90%) 38 ns tF Output Fall Time (90% to 10%) 24 ns IF = 10 mA, VO > 5 V 2.0 s IF = 10 mA, VO < 5 V 0.3 s tULVO ON ULVO Turn On Delay tULVO OFF ULVO Turn Off Delay | CMH | Common Mode Transient Immunity at Output High VDD = 30 V, IF = 10 mA to 16 mA, VCM = 2000 V, TA = 25°C(13) 20 50 kV/s | CML | Common Mode Transient Immunity at Output Low VDD = 30 V, VF = 0 V, VCM = 2000 V, TA = 25°C(14) 20 50 kV/s Notes: 9. Propagation delay tPHL is measured from the 50% level on the falling edge of the input pulse to the 50% level of the falling edge of the VO signal. 10. Propagation delay tPLH is measured from the 50% level on the rising edge of the input pulse to the 50% level of the rising edge of the VO signal. 11. PWD is defined as | tPHL – tPLH | for any given device. 12. The difference between tPHL and tPLH between any two FOD8342 parts under the same operating conditions, with equal loads. 13. Common mode transient immunity at output high is the maximum tolerable negative dVcm/dt on the trailing edge of the common mode impulse signal, VCM, to ensure that the output remains high (i.e., VO > 15.0 V). 14. Common mode transient immunity at output low is the maximum tolerable positive dVcm/dt on the leading edge of the common pulse signal, VCM, to ensure that the output remains low (i.e., VO < 1.0 V). ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 6 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Switching Characteristics VOH - VDD - OUTPUT HIGH VOLTAGE DROP (V) VOH - VDD - OUTPUT HIGH VOLTAGE DROP (V) 0 o TA = -40 C -1 o 25 C o 100 C -2 -3 f = 200 Hz 0.2% Duty Cycle VDD - VSS = 15 V to 30 V IF = 10 mA to 16 mA -4 0.0 0.5 1.0 1.5 2.0 2.5 0.00 -0.05 -0.10 -0.15 -0.20 -0.25 VDD - VSS = 15 V to 30 V IF = 10 mA to 16 mA IO = -100 mA -0.30 -40 -20 40 60 80 Figure 5. Output High Voltage Drop vs. Ambient Temperature 8 8 f = 200 Hz 0.2% Duty Cycle IOH - OUTPUT HIGH CURRENT (A) IOH - OUTPUT HIGH CURRENT (A) 20 VDD - VSS = 15 V to 30 V IF = 10 mA to 16 mA 6 VO = VDD - 6 V 4 VO = VDD - 3 V 2 -20 0 20 40 60 100 TA - AMBIENT TEMPERATURE ( C) Figure 4. Output High Voltage Drop vs. Output High Current 0 -40 80 f = 100 Hz 0.5% Duty Cycle VDD - VSS = 15 V to 30 V IF = 10 mA to 16 mA 6 VO = VDD - 6 V 4 VO = VDD - 3 V 2 0 -40 100 -20 o 0 20 40 60 80 100 o TA - AMBIENT TEMPERATURE ( C) TA - AMBIENT TEMPERATURE ( C) Figure 6. Output High Current vs. Ambient Temperature Figure 7. Output High Current vs. Ambient Temperature 4 0.30 f = 200 Hz 99.8 % Duty Cycle VDD - VSS = 15 V to 30 V VOL - OUTPUT LOW VOLTAGE (V) VOL - OUTPUT LOW VOLTAGE (V) 0 o IOH - OUTPUT HIGH CURRENT (A) IF = 0 A 3 o TA = 100 C 2 o 25 C o -40 C 1 0 0.0 0.5 1.0 1.5 2.0 VF = -3 V to 0.8 V IO = 100 mA 0.20 0.15 0.10 0.05 0.00 -40 2.5 -20 0 20 40 60 80 100 o IOL - OUTPUT LOW CURRENT (A) TA - AMBIENT TEMPERATURE ( C) Figure 8. Output Low Voltage vs. Output Low Current ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 VDD - VSS = 15 V to 30 V 0.25 Figure 9. Output Low Voltage vs. Ambient Temperature www.fairchildsemi.com 7 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Typical Performance Characteristics 8 f = 200 Hz 99.8% Duty Cycle VDD - VSS = 15 V to 30 V IOL - OUTPUT LOW CURRENT (A) IOL - OUTPUT LOW CURRENT (A) 8 IF = 0 A 6 VO = VSS + 6 V 4 VO = VSS + 3 V 2 0 -40 -20 0 20 40 60 80 f = 100 Hz 99.5% Duty Cycle VDD - VSS = 15 V to 30 V IF = 0 A 6 VO = VSS + 6 V 4 VO = VSS + 3 V 2 0 -40 100 -20 o 60 80 100 IDD - SUPPLY CURRENT (mA) 3.6 IDDH (30 V) 3.2 IDDL (30 V) IDDH (15 V) 2.8 IDDL (15 V) 2.4 VDD - VSS = 15V to 30 V IF = 0 A (for IDDL) 3.2 IDDH 2.8 2.4 2.0 -40 -20 0 IDDL IF = 0 A (for IDDL) IF = 10 mA (for IDDH) VSS = 0 V o TA = 25 C IF = 10 mA (for IDDH) 20 40 60 80 2.0 15 100 20 o Figure 12. Supply Current vs. Ambient Temperature 30 Figure 13. Supply Current vs. Supply Voltage 3.0 400 IF = 10 mA to 16 mA VO = Open Rg = 10 , Cg = 10 nF tP - PROPAGATION DELAY (ns) VDD - VSS = 15 V to 30 V 2.5 2.0 1.5 1.0 -40 25 VDD - SUPPLY VOLTAGE (V) TA - AMBIENT TEMPERATURE ( C) THRESHOLD (mA) 40 Figure 11. Output Low Current vs. Ambient Temperature 3.6 IFLH - LOW-TO-HIGH INPUT CURRENT 20 TA - AMBIENT TEMPERATURE ( C) Figure 10. Output Low Current vs. Ambient Temperature IDD - SUPPLY CURRENT (mA) 0 o TA - AMBIENT TEMPERATURE ( C) -20 0 20 40 60 80 200 tPHL o tPLH 100 0 15 100 18 21 24 27 30 VDD - VSS - SUPPLY VOLTAGE (V) TA - AMBIENT TEMPERATURE ( C) Figure 14. Low-to-High Input Current Threshold vs. Ambient Temperature ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 f = 250 kHz 50% Duty Cycle 300 Figure 15. Propagation Delay vs. Supply Voltage www.fairchildsemi.com 8 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Typical Performance Characteristics (Continued) 400 400 IF = 10 mA to 16 mA Rg = 10 , Cg = 10 nF tP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) VDD - VSS = 15 V to 30 V f = 250 kHz 50% Duty Cycle 300 200 tPHL 100 tPLH 0 6 8 10 12 14 VDD - VSS = 15 V to 30 V Rg = 10 , Cg = 10 nF 300 f = 250 kHz 50% Duty Cycle 200 tPHL 100 tPLH 0 -40 16 -20 40 60 80 100 Figure 17. Propagation Delay vs. Ambient Temperature 400 400 IF = 10 mA to 16 mA IF = 10 mA to 16 mA tP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 20 TA - AMBIENT TEMPERATURE ( C) Figure 16. Propagation Delay vs. LED Forward Current VDD - VSS = 15V to 30 V Cg = 10 nF 300 f = 250 kHz 50% Duty Cycle 200 tPHL 100 tPLH 0 VDD - VSS = 15 V to 30 V Rg = 10 300 f = 250 kHz 50% Duty Cycle 200 tPHL 100 tPLH 0 0 10 20 30 40 50 0 Rg - SERIES LOAD RESISTANCE () VDD - VSS = 30 V o TA = 25 C 30 25 20 15 10 5 1 2 3 4 5 IF - FORWARD CURRENT (mA) 80 100 10 o TA = 100 C 1 o 25 C o -40 C 0.1 0.01 0.8 1.0 1.2 1.4 1.6 1.8 VF - FORWARD VOLTAGE (V) Figure 20. Transfer Characteristics ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 60 100 1E-3 0.6 0 0 40 Figure 19. Propagation Delay vs. Series Load Capacitance IF - INPUT FORWARD CURRENT (mA) 35 20 Cg - SERIES LOAD CAPACITANCE (nF) Figure 18. Propagation Delay vs. Series Load Resistance VO - OUTPUT VOLTAGE (V) 0 o IF - LED FORWARD CURRENT (mA) Figure 21. Input Forward Current vs. Forward Voltage www.fairchildsemi.com 9 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Typical Performance Characteristics (Continued) FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Typical Performance Characteristics (Continued) VO - OUTPUT VOLTAGE (V) 15 10 (8.30 V) 5 (7.80 V) 0 0 5 10 15 VDD - VSS - SUPPLY VOLTAGE (V) Figure 22. Under Voltage Lockout ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 10 6 1 IF = 0 A f = 200 Hz Duty Cycle 99.8% IOL 100 0.1µF VOL 0.1µF 47µF VIN 47µF 5 2 3 + - VDD + - VO 4 100 Figure 23. IOL Test Circuit 6 1 IF = 10 mA f = 200 Hz Duty Cycle 0.2% IOH 100 VOH 5 2 VIN 3 0.1µF 47µF VO + - 0.1µF 47µF + - VDD 4 100 Figure 24. IOH Test Circuit ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 11 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Test Circuit 1 6 0.1µF IF = 10 mA 2 VOH 5 + - VDD 100mA 3 4 Figure 25. VOH Test Circuit 1 6 0.1µF 2 100mA + - 5 VOL 3 VDD 4 Figure 26. VOL Test Circuit ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 12 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Test Circuit (Continued) FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Test Circuit (Continued) IDDH 6 1 0.1µF IF = 10 mA to 16 mA 2 5 + - VO VDD 3 4 Figure 27. IDDH Test Circuit IDDL 1 6 0.1µF VF = -3.0 V to 0.8 V + - 2 5 VO + - VDD 3 4 Figure 28. IDDL Test Circuit ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 13 1 6 0.1µF IF 2 + - 5 VO > 5V 3 VDD 4 Figure 29. IFLH Test Circuit 1 6 0.1µF VF + - 2 + - 5 VO < 5V 3 VDD 4 Figure 30. VFHL Test Circuit 1 6 0.1µF IF = 10 mA 2 + - 5 VO = 5V 3 VDDRamp 4 Figure 31. UVLO Test Circuit ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 14 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Test Circuit (Continued) 6 1 f = 250 kHz Duty Cycle 50% 0.1µF 2 10 5 10nF + - VO IF MON 3 VDD 4 50 IF tR tF 90% 50% VOUT 10% tPLH tPHL Figure 32. tPHL, tPLH, tR and tF Test Circuit and Waveforms IF A 6 1 B 5V + - 0.1µF 2 5 + - VO 3 VDD = 30 V 4 VCM = 2,000 V VCM 0V Δt VO VOH Switch at A: IF = 10 mA VO VOL Switch at B: IF = 0 mA Figure 33. CMR Test Circuit and Waveforms ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 15 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Test Circuit (Continued) FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Reflow Profile Temperature (°C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Maximum Ramp-up Rate = 3°C/s Maximum Ramp-down Rate = 6°C/s tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25°C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Minimum (Tsmin) 150°C Temperature Maximum (Tsmax) 200°C Time (tS) from (Tsmin to Tsmax) 60 s to 120 s Ramp-up Rate (tL to tP) 3°C/second maximum Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60 s to 150 s Peak Body Package Temperature 260°C +0°C / –5°C Time (tP) within 5°C of 260°C 30 s Ramp-Down Rate (TP to TL) 6°C/s maximum Time 25°C to Peak Temperature 8 minutes maximum Figure 34. Reflow Profile ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 16 Part Number FOD8342 Package Packing Method Stretched Body SOP 6-Pin Tube (100 units per tube) FOD8342R2 Stretched Body SOP 6-Pin Tape and Reel (1,000 units per reel) FOD8342V Stretched Body SOP 6-Pin, DIN EN/IEC60747-5-5 Option Tube (100 units per tube) FOD8342R2V Stretched Body SOP 6-Pin, DIN EN/IEC60747-5-5 Option Tape and Reel (1,000 units per reel) FOD8342T Stretched Body SOP 6-Pin, Wide Lead Tube (100 units per tube) FOD8342TR2 Stretched Body SOP 6-Pin, Wide Lead Tape and Reel (1,000 units per reel) FOD8342TV Stretched Body SOP 6-Pin, Wide Lead, DIN EN/IEC60747-5-5 Option Tube (100 units per tube) FOD8342TR2V Stretched Body SOP 6-Pin, Wide Lead, DIN EN/IEC60747-5-5 Option Tape and Reel (1,000 units per reel) All packages are lead free per JEDEC: J-STD-020B standard. Marking Information 1 8342 V 3 P XX YY 4 2 6 5 Definitions 1 Fairchild Logo 2 Device Number, e.g. 8342 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 Two Digit Year Code, e.g. ‘15’ 5 Two Digit Work Week Ranging from ‘01’ to ‘53’ 6 Assembly Package Code ©2015 Fairchild Semiconductor Corporation FOD8342, FOD8342T Rev. 1.1 www.fairchildsemi.com 17 FOD8342, FOD8342T — 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin Ordering Information 1.27 (0.78) 1.27 3 2 3 1 1 A PIN 1 INDICATOR 7.45 6.81±0.30 10.45 0.80 1.50 4 5 4.50±0.30 6 4 B RECOMMENDED LAND PATTERN 10° 3.18±0.30 (1.59) 0.20±0.10 C 0.40±0.10 6X 6X 0.20 C A B 6 0.10 C NOTES: UNLESS OTHERWISE SPECIFIED A) NO STANDARD APPLIES TO THIS PACKAGE B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE BURRS OR MOLD FLASH, AND TIE BAR EXTRUSION. D) DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009. E) DRAWING FILE NAME: MKT-M06BREV1 (2.54) 1.27 (0.78) 1.27 3 2 3 1 1 A PIN 1 INDICATOR 9.25 6.81±0.30 12.25 0.80 1.50 4 5 6 4.50±0.30 4 B 6 RECOMMENDED LAND PATTERN 10° R0.15 R0.15 3.18±0.30 (1.59) 0.20±0.10 C 0.40±0.10 6X 0.20 0.204~0.304 0.75±0.30 11.50±0.30 6X C A B 0°~8° 0.10 C NOTES: UNLESS OTHERWISE SPECIFIED A) NO STANDARD APPLIES TO THIS PACKAGE B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE BURRS OR MOLD FLASH, AND TIE BAR EXTRUSION. D) DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009. E) DRAWING FILE NAME: MKT-M06CREV1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com