UTC M54133AL-S16N-T Earth leakage current detector Datasheet

UNISONIC TECHNOLOGIES CO., LTD
M54133A
Preliminary
LINEAR INTEGRATED CIRCUIT
EARTH LEAKAGE CURRENT
DETECTOR
„
DESCRIPTION
The UTC M54133A is a semiconductor integrated circuit
developed for use in high-speed earth leakage breakers
incorporating functions to protect against voltage surges and
inverter noise.
„
FEATURES
* Improvement of ability against unwanted tripping by
lightning-surge and lightning impulse.
Two times counting system adopted.
* Improvement of ability against unwanted tripping by
inverter-noise.
Built-in operational amplifier (of low current dissipation) for active
low-pass filter.
Improved high-frequency, high harmonic superposition
performance
* Internal time delay function
* An external capacitor is used to set the delay time.
* High input sensitivity: VT=11.5mVrms Typ.
* Low-current dissipation (at RIREF=180kΩ)
In stand-by condition: IS=610μA Typ.
* High stabilities design
Adopt the circuits that is not affected by fluctuations of supply
voltage/ambient temperature.
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
M54133AL-S16-R
M54133AG-S16-R
M54133AL-S16-T
M54133AG-S16-T
M54133AL-S16N-R
M54133AG-S16N-R
M54133AL-S16N-T
M54133AG-S16N-T
M54133AL-S16-R
Package
Packing
SOP-16
SOP-16
SOP-16N
SOP-16N
Tape Reel
Tube
Tape Reel
Tube
(1)Packing Type
(1) R: Tape Reel, T: Tube
(2)Package Type
(2) S16: SOP-16, S16N: SOP-16N
(3)Halogen Free
(3) L: Lead Free, G: Halogen Free
www.unisonic.com.tw
Copyright © 2013 Unisonic Technologies Co., Ltd
1 of 8
QW-R122-009.b
M54133A
„
„
Preliminary
LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
GND
1
16 VS
IREF
2
15 OPI+
VCC
3
14 C1
OFFC
4
13 OPI-
TRC1
5
12 C2
TRC2
6
11 OPAO
DLYC
7
10 ILKI
SCRT
8
9
VREF
PIN DESCRIPTION
PIN NO.
1
2
3
PIN NAME
GND
IREF
VCC
4
OFFC
5
TRC1
6
7
8
9
10
11
TRC2
DLYC
SCRT
VREF
ILKI
OPAO
12
C2
13
OPI-
14
C1
15
16
OPI+
VS
DESCRIPTION
Grounding
Pin for connecting resistor that sets constant current for internal circuits; approx. 1.3 V.
Output pin of the internal constant-voltage circuit. Connect decoupling capacitor.
Leakage input signal does not continue.
Leakage is detected and SCR turn on.
In these cases, this IC will be restored to the initial condition after a predetermined time.
Connect capacitor that determines restore time.
Pin for connecting capacitor that integrates signal output from discriminator of
leak-signal input level.
Pin for connecting capacitor to eliminate noise.
Pin for connecting capacitor that sets delay time in case of using delay function.
Output pin for driving a SCR.
Pin for providing input reference level of leakage detection. About 2.4V appears.
Other input pin of leakage detection.
Output pin of operational amplifier.
Pin for connecting capacitor that prevents abnormal oscillations. Connect capacitor
across IC at pins 11 and 12.
Negative input pins of operational amplifier
Pin for connecting capacitor that prevents noise from causing malfunction. Connect
capacitors across IC at pins 13 and 14 and across IC at pins 15 and 14.
Positive input pins of operational amplifier
Power supply
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 8
QW-R122-009.b
M54133A
„
Preliminary
LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 8
QW-R122-009.b
M54133A
„
Preliminary
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise noted)
PARAMETER
SYMBOL
RATINGS
UNIT
Maximum Supply Voltage
VS(MAX)
15
V
Differential Input Voltage
OPI+ to OPIVID
-0.8~+0.8
V
Supply Current
IS
4
mA
Differential Input Current
OPI+ to OPIllOP
-5~+5
mA
Input Current
VREF to GND
llG
10
mA
Power Dissipation
PD
200
mW
Operating Ambient Temperature
TOPR
-20~+85
°C
Storage Temperature
TSTG
-55~+125
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage Range
„
SYMBOL
VS
RATINGS
7 ~ 12
UNIT
V
ELECTRICAL CHARACTERISTICS (TA=25°C, VS =9V, unless otherwise noted)
PARAMETER
Power Supply Circuit
Maximum Supply Voltage
VCC-Pin Output Voltage
Supply Current (In Standby)
Supply Current (While Detecting Leakage)
Supply Current (Immediately after Drive a SCR)
Ambient Temperature Dependence of IS0
Operational Amplifier
Differential Input Clamp Voltage
OPOA-Pin “H” Output Current
OPOA-Pin “L” Output Current
Input Bias Current
Voltage Gain
Frequency Band Width
Maximum Output Voltage
Output Offset Voltage
Leak Detector Circuit
VREF-Pin Output Voltage
VREF-GND Clamp Voltage
DC Input Voltage of Leakage Detection
ILKI-Pin Input Bias Current
3-ms Circuit
TRC1 threshold voltage
Accuracy of TRC1-Pin “H” Output Current
Accuracy of TW1 pulse width
Ambient Temperature Dependence of TW1
SYMBOL
VS(MAX)
VCC
IS0
IS1
IS2
IS=4mA
IOH=-1mA
TA=-25~+85°C
VIC
IOH
IOL
IIC
GV
BW
VO
MIN TYP MAX UNIT
13.9 15
V
5.2
V
520 610 700 μA
560 650 740 μA
480 570 660 μA
-0.2
%/°C
IIDC=±4mA
f=1kHz
-3dB
VO(OFF)
VO
VRCL
IOH=-200μA
IRCL=5mA
VI(ON)
With respect to VREF
IIH
VTH1
EIOH1
ETW1
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
VIN=VREF
VO=0V, IOH1=-7.6μA
C=0.01μf, TW1=3ms
TA=-20~+85°C
±0.8
2.8
0.8
125
40
6
3.5
0
V
mA
mA
nA
dB
kHz
VPP
mV
2.4
4.7
±14.
0
220
V
V
mVd
c
nA
2.4
V
+10 %
+15 %
%/°C
-10
-15
0
4 of 8
QW-R122-009.b
M54133A
„
Preliminary
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS (Cont.)
PARAMETER
1-ms Circuit
TRC2 Threshold Voltage
Accuracy of TRC2-pin “H” Output Current
Accuracy of TW2 Pulse Width
SYMBOL
VTH2
EIOH2
ETW2
SCRT-Pin “H” Output Current
VO=0V, IOH2=-7.6μA
C=0.0047μF, TW2=1.5ms
TA=+25°C~+85°C
TA=+25°C~-20°C
TA=-20~+85°C
60Hz
VTH
EIOH
ETW3
VO=0V, IOH=-7.6μA
C=0.33μF, TW3=75ms
-10
-30
VTH
EIOH
ETW4
VO=0V, IOH=-7.6μA
C=1.0μF, TW4=300ms
-10
-30
IOL=200μA
VT
VOL8
VS(OFF)
IOHC
IOHN
IOHH
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN TYP MAX UNIT
V
-10
+10
%
-15
+15
%
-8.0
%
+2.0
%
0
%/°C
11.5
mVrms
Ambient Temperature Dependence of VT
Ambient Temperature Dependence of Tw2
Total AC Input Voltage of Leakage Detection
Reset Circuit
OFFC Threshold Voltage
Accuracy of OFFC-pin “H” Output Current
Accuracy of Reset Time Pulse Width
Delay Circuit
DLYC Threshold Voltage
Accuracy of DLYC-pin “H” Output Current
Accuracy of Delay Timer Pulse Width
SCR Driver Circuit
SCRT-Pin “L” Output Voltage
Supply Voltage for IOH Hold
TEST CONDITIONS
2.4
2.4
+10
+30
V
%
%
+10
+30
V
%
%
0.1 0.2
3.0 4.0
-100 -160
-50 -130
-33 -100
V
V
μA
μA
μA
2.4
VO=8V
TA=-20°C
TA=+20°C
TA=+85°C
5 of 8
QW-R122-009.b
M54133A
„
WITHOUT DELAY FUNCTION
„
USING DELAY FUNCTION
Preliminary
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
LINEAR INTEGRATED CIRCUIT
6 of 8
QW-R122-009.b
M54133A
„
Preliminary
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATION CIRCUIT
ZCT
AC-LINE
16
VS
15
OPI+
14
13
C1 OPI-
C2
12
OPAO
11
ILKI
10
VREF
9
AMP
+
UTC M54133A
Power Supply Circuit
GND
1
IREF VCC
2
Trip Coil
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
OFFC
3
SCR
Driver
Leakage Detection Circuit
4
TRC1 TRC2
5
6
DLYC
SCRT
7
8
SCR
7 of 8
QW-R122-009.b
M54133A
Preliminary
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
8 of 8
QW-R122-009.b
Similar pages