GPSEMI GPTP3182 Phase controlled scr Datasheet

Green Power Solutions Srl
Web: www.gpsemi.it e-mail: [email protected]
Phone: +39-011-988 2251
Fax: +39-011-988 1358
http://gpsemi.it/pdf/GPTP3182.pdf
GPTP3182
PHASE CONTROLLED SCR
High reliability operation
DC power supply
AC drives
VOLTAGE UP TO
2200 V
AVERAGE CURRENT
1825 A
SURGE CURRENT
BLOCKING CHARACTERISTICS
Characteristic
Conditions
26 kA
Value
VRRM
Repetitive peak reverse voltage
2200 V
VRSM
Non-repetitive peak reverse voltage
2200 V
VDRM
Repetitive peak off-state voltage
IDRM
IRRM
Repetitive peak off-state current, max.
Repetitive peak reverse current, max.
2300 V
VDRM, single phase, half wave, Tj = Tjmax
VRRM, single phase, half wave, Tj = Tjmax
150 mA
150 mA
ON-STATE CHARACTERISTICS
IT(AV)
Average on-state current
Sine wave,180° conduction, Th = 55 °C
1825 A
IT(RMS)
R:M:S on-state current
Sine wave,180° conduction, Th = 55 °C
2865 A
ITSM
Surge on-state current
Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax
I²t
I² t for fusing coordination
VT(TO)
Threshold voltage
Tj = Tjmax
0.992 V
rT
On-state slope resistance
Tj = Tjmax
0.206 mW
VTM
Peak on-state voltage, max
On-state current IT = 2000 A , Tj = Tjmax
1.40 V
IH
IL
Holding current, typ
Latching current, typ
Tj = 25 °C
Tj = 25 °C
200 mA
450 mA
26 kA
3380 kA²s
TRIGGERING CHARACTERISTICS
VGT
Gate trigger voltage
Tj = 25 °C, VD = 5 V
3.0 V
IGT
Gate trigger current
Tj = 25 °C, VD = 5 V
250 mA
VGD
Non-trigger voltage
VD = 67% VRRM, Tj = Tjmax
0.3 V
PGM
Peak gate power dissipation
Pulse width 100 µs
150 W
PG(AV)
Average gate power dissipation
IFGM
Peak gate current
10 A
VFGM
VRGM
Peak gate voltage (forward)
Peak gate voltage (reverse)
12 V
10 V
3 W
SWITCHING CHARACTERISTICS
di/dt
Critical rate of rise of on-state current
Tj = Tjmax
200 A/µs
dV/dt
Critical rate of rise of off-state voltage
Tj = Tjmax
1000 V/µs
tq
Turn-off time, typ
Tj = Tjmax, IT = 1000 A, di/dt = -20 A/µs
µs
VR = 50 V, VD = 67% VDRM, dV/dt = 20 V/µs
THERMAL AND MECHANICAL CHARACTERISTICS
Rth(j-c)
Thermal resistance (junction to case)
Double side cooled
0.015 °C/W
Rth(c-h)
Thermal resistance (case to heatsink)
Double side cooled
0.006 °C/W
Tjmax
Max operating junction temperature
Tstg
Storage temperature
F
Clamping force ± 10%
Mass
Document GPTP3182T002
125 °C
-40 / 125 °C
22 kN
520 g
GPTP3182
PHASE CONTROLLED SCR
Current rating - sine wave
Power loss - sine wave
4000
120
180°
3500
110
90°
3000
100
PF [W]
Heatsink temperature [°C]
130
90
80
70
60°
2500
30°
2000
1500
1000
60
30°
60°
90°
120°
500
180°
50
0
0
400
800
1200
1600
2000
0
400
800
IT [A]
1600
25
[A]
ITIT[A]
20
15
10
5
0
10
100
4000
4000
3500
3500
3000
3000
2500
2500
2000
2000
1500
1500
1000
1000
500
500
00
0.5
0
Tj=Tjmax
Tj=Tjmax
0.5 1
1
1.5 1.5
V
VTT [V]
[V]
Number of cycle current pulses [n]
Thermal impedance (j-c)
0.02
ZTH(j-c) [°C / W]
0.016
0.012
0.008
0.004
0
0.001
0.01
0.1
1
10
Time [s]
Ordering information GPTP3182-VVGL
VV: blocking voltage / 100 (e.g. 22 for 2200 V)
G: trigger lead type (S = straight T = twisted blank = no leads)
L: trigger lead lenght x 100mm (3 - 4 - 5 - 7 blank = no leads)
dimensions mm
In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet
without notice.
Document GPTP3182T002
2000
On-state voltage drop
30
1
1200
IT[A]
Maximum surge current
d.s. cooled
ITSM [A]
120°
2
Similar pages