IES-0820 8 FE Unmanaged Switch -40 to 75, DIN-rail Overview Redundancy High Reliability Plug & Play Oil & Gas Hazardous Application Safety LevelOne IES-0820 Industry Ethernet Switch provides 8 ports of 10/100Base-TX Ethernet to enable high speed network at mission-critical environment. This device is designed to be mounted on an industry standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Comply with Class 1, Division 2 certified, UL 1604 standard (UL ISA12.12.01) is a higher level certification to assure that products can be safely operated where specific potentially flammable or explosive materials may be present. Sparks can be highly dangerous in the presence of specific flammable gases, vapors or liquids; such as oil and gas refinery, as well as companies that deal with hazardous chemicals. This redundant power system is designed to meet the challenge of power failure to ensure reliability and constant availability. Single power design works fine in non-critical network applications, but it falls short drastically for network applications in transportation, automate production or banking. This unmanaged Industrial Ethernet Switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or configure required, truly plug and play. This device has been tested under UL508 standard for Industrial Control Equipment to endurance under test turn on and off 6,000 times while loaded, with no single failure. It’s highly reliability and safety measurement to ensure field hardened, especially for the harsh environment. Features - Provides flexibility of 8 Ethernet ports that configure in combinations of copper and fiber optic interfaces - Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Redundant power inputs(12 - 48VDC) with Terminal Block and DC Jack (12VDC) - Alarms for power and port link failure by relay output - -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) - Provides DIN-rail or panel mounting - Complies with NEMA TS2 Environmental requirements for Traffic control equipment - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment Diagrams Unit: mm 50 DC JACK DC12V/3 A PORT FAULT 135 FAULT TERMINA L BLOC K PORT FAULT GND PWR1 Back GND Side PWR2 FAULT Front Top 110 Buttom Specifications Technology Standards Environment IEEE802.3 10BASE-T, IEEE802.3u 100BASETX/100BASE-FX,IEEE802.3x Forward and Filtering Rate 14,880pps for 10Mbps Packet Buffer Memory 768K bits Processing Type Store-and-Forward Address Table Size 2048 MAC addresses 148,810pps for 100Mbps Half-duplex back-pressure and IEEE802.3x full-duplex flow control Operating Temperature -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) MTBF 80.15 years Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 EMI FCC Part 15, Class A, VCCI EN61000-6-3 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV; Criteria B Air: + / - 8KV; Criteria B - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM Criteria A 3V/m, 1400 to 2000MHz; 80% AM Criteria A 1V/m, 2000 to 2700MHz; 80% AM Criteria A - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV; Criteria B D.C. Power Ports: + / - 4KV; Criteria B - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line; Criteria B D.C. Power Ports: + / - 0.5KV; Line-to-Earth; Criteria B - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz; Criteria A Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.) Power Input Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) Power Consumption 6.3W Max. 0.48A @ 12VDC, 0.24A @ 24VDC Overload Current Protection Present Reverse Polarity Protection Present 0.13A @ 48VDC Mechanical Casing Aluminum case Dimensions 50mm (W) x 110mm (D) x 135mm (H) (1.97" (W) x 4.33" (D) x 5.31" (H)) Weight 0.8Kg (1.76lbs.) Installation DIN-Rail (Top hat type 35mm), Panel Mounting Interface Ethernet Port 10/100BASE-TX: 8, 6, 5 or 4 ports 100BASE-FX: 0, 1, 2 or 4 ports LED Indicators Per Unit: Power Status (Power 1, Power 2, Fault) Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow) Alarm Contact One relay output with current 1.5A @ 24VDC Order Information IES-0820 - 8 FE Unmanaged Switch -40 to 75, DIN-rail Package Contents IES-0820 Quick Installation Guide www.level1.com one world_one brand_one level_