Industrial Ethernet Switch DIN-Rail Unmanaged Ethernet Switch v1.4 / Dec, 2011 IES-1050A IES-1080A Industrial Slim Type 5/8-port unmanaged Ethernet switch Industrial Ethernet Switch IES-1050A/1080A Features Industrial Media Converter ▪ IES-1050A provides 5 x 10/100Base-T(X) ports ▪ IES-1080A provides 8 x 10/100Base-T(X) ports ▪ Supports auto-negotiation and auto-MDI/MDI-X ▪ Supports store-and-forward transmission Industrial Device Server ▪ Supports flow control ▪ Warning system by relay output ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled Industrial Wireless Access Point IES-1050A/1080A is unmanaged Ethernet switches with 5 or 8 x 10/100Base-T(X) ports. IES-1050A/1080A support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. IES-1050A/1080A can be used in connecting several Ethernet devices like Ethernet I/O, IP-Camera or other Ethernet switches. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. Industrial M2M Gateway Practical Operation Industrial Cellular VPN Router Introduction Accessories Network Management Software Connections of Ethernet devices D esign ed for R u gged E xcellence 1-267 Industrial Ethernet Switch DIN-Rail Unmanaged Ethernet Switch v1.4 / Dec, 2011 Dimensions Industrial Ethernet Switch 1 (Unit=mm) Specifications ORing Switch Model IES-1080A IES-1050A 8 5 Physical Ports 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX Technology Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3x for Flow control MAC Table 2048 MAC addresses Processing Store-and-Forward LED Indicators Power Indicator Green : Power LED x 2 Fault Indicator Amber : Indicates PWR1 or PWR2 failure occurred 10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision Fault Contact Relay Relay output to carry capacity of 1A at 24VDC Power Redundant Input Power Dual DC inputs: 12~48 VDC on 6-pin terminal block Power Consumption (Typ.) 1-268 4 Watts Overload Current Protection Present Reverse Polarity Protection Present w w w.oring - net wo rk in g.co m 3.5 Watts Industrial Ethernet Switch DIN-Rail Unmanaged Ethernet Switch v1.4 / Dec, 2011 Enclosure IP-30 Dimensions (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.) Weight (g) 391 g 382 g Environmental -40 to 85°C (-40 to 185°F) Operating Temperature -40 to 70°C (-40 to 158°F) Operating Humidity 5% to 95% Non-condensing Regulatory Approvals FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 707,879 Warranty 5 years Industrial Device Server EMI Industrial Media Converter Storage Temperature Industrial Ethernet Switch Physical Characteristics Industrial Wireless Access Point Ordering Information I E S -1 A A B A - 08: 8 ports - 05: 5 ports Option Additional Port Number - 0: 0 port Description IES-1080A Industrial 8-port slim type unmanaged Ethernet switch with 8x10/100Base-T(X) IES-1050A Industrial 5-port slim type unmanaged Ethernet switch with 5x10/100Base-T(X) Optional Accessories (Can be purchased separately) ‧DR-45 series, 45W DIN-Rail power supply ‧DR-75 series, 75W DIN-Rail power supply ‧DR-120 series, 120W DIN-Rail power supply ‧SDR-240-48, 240W DIN-Rail power supply ‧SDR-480-48, 480W DIN-Rail power supply Accessories Packing List ‧IES-1050A / 1080A ‧DIN-Rail Kit ‧Wall-mount Kit ‧Quick Installation Guide Industrial M2M Gateway Model Name Available Model 10/100Base-T(X) Port Number Industrial Cellular VPN Router Code Definition Network Management Software D esign ed for R u gged E xcellence 1-269