Kingbright APG1005PBC-T-5MAV Low power consumption Datasheet

1.0X0.5mm SMD CHIP LED LAMP (0.2mm
Height)
ATTENTION
Part Number: APG1005PBC-T-5MAV
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Blue
Features
Descriptions
z 1.0mmX0.5mm SMT LED, 0.2mm thickness.
z The Blue source color devices are made with InGaN on
SiC substrate Light Emitting Diode.
z Low power consumption.
z Electrostatic discharge and power surge could damage
z Wide viewing angle.
z Compatible with automatic placement equipment.
z Ideal for backlight and indicator.
the LEDs.
z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs.
z Package: 4000pcs / reel.
z Moisture sensitivity level : level 3.
z Low current IF=5mA operating.
z All devices, equipments and machineries must be
electrically grounded.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAN2911
REV NO: V.5B
DATE: MAY/06/2015
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203013982
Selection Guide
Part No.
Dice
APG1005PBC-T-5MAV
Iv (mcd) [2]
@ 5mA
Lens Type
Blue (InGaN)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
20
28
145°
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
461
nm
IF=5mA
Blue
467
nm
IF=5mA
Spectral Line Half-width
Blue
22
nm
IF=5mA
VF [2]
Forward Voltage
Blue
2.9
3.1
V
IF=5mA
IR
Reverse Current
Blue
50
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
32
mW
DC Forward Current
10
mA
Peak Forward Current [1]
50
mA
Reverse Voltage
5
V
1000
V
Electrostatic Discharge Threshold (HBM)
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAN2911
REV NO: V.5B
DATE: MAY/06/2015
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203013982
Blue
APG1005PBC-T-5MAV
SPEC NO: DSAN2911
REV NO: V.5B
DATE: MAY/06/2015
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203013982
APG1005PBC-T-5MAV
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAN2911
REV NO: V.5B
DATE: MAY/06/2015
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203013982
PACKING & LABEL SPECIFICATIONS
APG1005PBC-T-5MAV
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAN2911
REV NO: V.5B
DATE: MAY/06/2015
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203013982
Similar pages