NKK FMBN04BD Nonilluminated options in 4 or 16 keys, illuminated choices in 12 or 16 key Datasheet

Series FM
Toggles
Membranes
DISTINCTIVE CHARACTERISTICS
• Nonilluminated options in 4 or 16 keys, illuminated choices in 12 or 16 keys
Rockers
• 1.0mm (.039”) tail pitch
• Easily integrated into designs: replaces multiple mechanical switches, soldered
wires and cable assemblies
Pushbuttons
• Card insertion into design supports customized legends for nonilluminated models
• Actuating dome offers crisp, tactile feedback to positively indicate circuit transfer
• Illuminated models feature legends on embossed keypads
Programmable Illuminated PB
• Adhesive backing for easy mounting
GENERAL SPECIFICATIONS
20mA @ 24V DC
Contact Resistance
500Ω maximum (10mA @ 10V DC)
Insulation Resistance
100 megohms minimum @ 250V DC minimum
Dielectric Strength
250V AC minimum for one minute minimum
Operational Life
1,000,000 operations minimum
Contact Timing
10 milliseconds maximum
Nominal Operating Force
1.0N ~ 6.0N
Stroke:
Nonilluminated
Illuminated with Overlay
.016” ~ .039” (0.4mm ~ 1.0mm)
.020” ~ .047” (0.5mm ~ 1.2mm)
Rotaries
–15°C ~ +50°C (+5°F ~ +122°F) illuminated
Slides
Operating Temperature Range
Keylocks
Power Level
–15°C ~ +55°C (+5°F ~ +131°F) nonilluminated
VF
2.1
V
Forward Current (Typical)
IF
20
mA
Forward Current (Maximum)
IF
30
mA
* Forward Peak Current (Max)
I FM
195
mA
Reverse Voltage (Maximum)
VR
5.0
V
The electrical specifications
shown are determined at a
basic temperature of 25°C.
LED is an integral part of
the switch. LEDs are not
sold separately.
R
+
IF
R =
Anode
VF
E
–
Where: R =
E =
VF =
Cathode
IF =
E – VF
IF
Resistor Value (Ohms)
Source Voltage (V)
Forward Voltage (V)
Forward Current (A)
LED circuits are isolated and require an external power source.
If the source voltage exceeds the rated voltage, a ballast resistor is required.
L
* Note: Pulse width 0.1msec maximum with a maximum duty cycle ratio of 1/10
Description
FMBN04BE
FMBN16BD
4
Nonilluminated
FMBN16BE
FMBP12BF
FMBP16BF
Surface Sheet
Black (D)
Gray (E)
•
•
4
16
•
•
16
Dot Illuminated
with
Overlay
Overlay
Accessories
FMBN04BD
Number of Keys
Gray Surface Sheet with
Embossed White Keypad
and Gray Legends
12
16
www.nkk.com
Supplement
Illumination
Indicators
Ordering Information
Part Number
Tilt
Forward Voltage (Typical)
Unit
Touch
Single Element LED Color: Amber
Tactiles
LED SPECIFICATIONS
L15
Series FM
Toggles
Membranes
TYPICAL SWITCH DIMENSIONS
Nonilluminated • 4 or 16 Keys
Switch Circuit Matrix
For 4 Key
Rockers
(6.0)
.236
P (1.0) Typ
.039
(0.7) Typ
.028
(0.5)R Typ
.020
Pushbuttons
Pin 1
1
(0.3)
.012
2
(1)
(8.0)
.315
Pin 5
(4.0)
.157
Programmable Illuminated PB
Key numbers in parenthesis
are not actually on panel
and are for reference only
2
Switch Circuit Matrix
Detail For 4 or 16 Key
(93.0)
3.661
Keylocks
4
Rotaries
(1.2)
.047
Slides
FMBN04BE
Gray
Surface
Sheet
(8.0)
.315
(70.0)
2.756
13
14
15
16
9
10
11
12
5
6
7
8
1
2
3
4
Switch Circuit Matrix
For 16 Key
(36.0)
1.417
(0.3)
.012
5
(4)
1
(0.5) R Typ
.020
Pin 8
(4.0)
.157
4
(3)
(18.0)
.709
Pin 1
3
(2)
(70.0)
2.756
3
(9.0) Typ
.354
(0.7)
.028
P (1.0) Typ
.039
(13)
(14)
(15)
(16)
(9)
(10)
(11)
(12)
(5)
(6)
(7)
(8)
(1)
(2)
(3)
(4)
(1.2)
.047
(93.0) Sq
3.661
8
7
6
FMBN16BD
Black
Surface
Sheet
5
4
3
2
Tactiles
1
Tilt
Key numbers in parenthesis
are not actually on panel
and are for reference only
L
(1.0)
.039
(18.0) Sq Typ
.709
Indicators
Touch
Insertable Legend Card for 4 Key or 16 Key
Supplement
Accessories
(82.5)
3.248
(19.0) Typ
.748
(19.0) Typ
.748
(12.75) Typ
.502
(12.75) Typ
.502
(1.0)
.039
(12.75) Typ
.502
Insertable Legend Cards
are supplied with the
nonilluminated switch
keypad assembly in
Black, Gray and Yellow
(19.0) Typ
.748
(25.5)
1.004
L16
www.nkk.com
(18.0) Sq Typ
.709
(82.5) Sq
3.248
(0.1) ~ (0.12)
.004 .005
Series FM
Toggles
Membranes
TYPICAL SWITCH DIMENSIONS
Switch Cable
1
2
3
4
5
6
7
8
9
0
#
LED Cable
(93.0)
3.661
(74.0)
2.913
(5)
(6)
(7)
(8)
(9)
(*)
(0)
(#)
8
7
6
5
(1)
(2)
(3)
6
7
8
9
A
B
C
D
E
F
(4)
(5)
(6)
(7)
(8)
(9)
(*)
(0)
(#)
(2.0)
.079
Dot illumination at upper left corner of each keypad
Switch Circuit Matrix
For 16 Key
16
15
14
13
(0)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(A)
(B)
(C)
(D)
(E)
(F)
LED Circuit Matrix
For 16 Key
8
7
6
5
(0)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(A)
(B)
(C)
(D)
(E)
(F)
16
15
14
13
4
12
4
12
3
11
3
11
10
2
10
9
1
9
2
NC
5
1
NC
Key numbers in parenthesis are not actually on panel and are for reference only
Tilt
(4)
4
Switch Circuit Matrix
Detail For 12 or 16 Key
FMBP12BF
L
FMBP16BF
Indicators
(3)
3
LED Circuit Matrix
Detail For 12 or 16 Key
Accessories
(2)
2
Supplement
(1)
1
(93.0) Sq
3.661
Dot illumination at upper left corner of each keypad
LED Circuit Matrix
For 12 Key
(70.0)
2.756
Switch Cable
0
(2.0)
.079
Switch Circuit Matrix
For 12 Key
Pin 8
Pushbuttons
(70.0)
2.756
(8.0)
.315
Programmable Illuminated PB
LED Cable
16
Pin 1
(0.3) Typ
.012
Keylocks
Pin 9
(4.0)
.157
Pin 8
(9.0) Typ
.354
(18.0)
.709
(0.5) R Typ
.020
(19.0)
.748
Rotaries
16
Pin 1
P (1.0) Typ
.039
(0.7) Typ
.028
(8.0)
.315
Slides
Pin 9
(4.0)
.157
(0.3) Typ
.012
Tactiles
(9.0) Typ
.354
(18.0)
.709
(0.5) R Typ
.020
(19.0)
.748
Touch
P (1.0) Typ
.039
(0.7) Typ
.028
Rockers
Illuminated • 12 or 16 Keys
www.nkk.com
L17
Toggles
Series FM
Membranes
INSERTABLE LEGEND CARDS
Instructions for Customizing Insertable Legends
Border
Rockers
The membrane keypad assembly comes with three insertable legend cards: yellow, gray and black.
Printable
Area
(1.5) Typ
.059
The following provides guidelines for creating and insertion of legend cards for the membrane switch
keypad assembly. Read all of the instructions prior to customizing and inserting the legend card.
Pushbuttons
• Using the borders on the insertable legend card as a guide, be sure characters on the card are
Card
(1.5) Typ
.059
about 1.5mm (.059”) within these borders. This is the printable area.
• Legend characters may be drawn, printed, etc. Be sure that application choice is completely
Programmable Illuminated PB
dry before inserting into membrane keypad assembly.
Surface
Sheet
Instructions for Inserting Legend Card
• Note correct orientation of insertable legend card. Insert card under surface sheet, and use caution
7
to avoid bending the membrane keypad assembly. Do not use pointed object to insert card, and do
A
B
9
C
6
8
D
5
3
4
2 P
O
1
ST
0
not remove surface sheet.
3
C
B
9
6
2
5
1
4
7
8
• Smooth any wrinkles or air pockets from surface sheet.
Keylocks
Protective
Film
Surface
Sheet
A
• Align and center all legend characters within the squares of the surface sheet.
• Peel off adhesive strip from the membrane keypad assembly.
• The legend card is now firmly in place and cannot be removed.
Adhesive Strip
Rotaries
• Detach the protective film.
Connectors
Recommended Connectors for 5 Pin
Recommended Connectors for 8 Pin
Straight: FCI Part No. SLW8S-5C7LF
Right Angle: FCI Part No. SLW5R-5C7LF
Right Angle: FCI Part No. SLW8R-5C7LF
Slides
Straight: FCI Part No. SLW5S-5C7LF
PRECAUTIONS FOR HANDLING
Tactiles
• Assembly of legend card insert is handled by the customer. Therefore, we recommend to evaluate the finished product with the card
assembled.
• Nonilluminated products have a loophole on each key. It is possible to add optional illumination by installing appropriate LEDs.
Legend card does not have loopholes.
• To test proper electrical operation of switches, use of an electric buzzer is recommended.
Tilt
• Use an additional chattering prevention circuit for the switch circuit.
• Do not operate switches with pointed objects (i.e. screwdrivers) to prevent perforation of film overlay.
Touch
• Use an FPC connector that corresponds to the printed circuit. Contact factory for suitable connectors.
L
• During assembly and installation of legends place devices on a level, sturdy surface. We do not recommend assembly and installation of device using a free hand or on a soft surface.
• These devices contain adhesive that may emit noise. This does not affect product functionality.
• Do not depress any switch areas during assembly/installation.
• These membrane switches are built with air vents. Prior to installation, make corresponding holes to allow air vents to function.
These holes should first be aligned with the membrane switch device, then made on the body of the final installation structure.
Supplement
Accessories
Indicators
• Do not fold, bend, or apply pressure to the product.
Do not allow water or oil to penetrate through the air vents. Entry of any liquids through the air vents may cause contact failure.
APPLICATIONS
• Communication equipment
• Office machines
• Electronic equipment for national security
• Automation equipment
• Electronic equipment
• Amusement equipment
L18
www.nkk.com
Similar pages