Artesyn LCC600-48H-9P 600 watts conduction cooling Datasheet

POWER
LCC600
600 Watts Conduction Cooling
Data Sheet
Total Power: 600 W
# of Outputs: Single
Outputs: 12, 28, 36, 48 Vdc
SPECIAL FEATURES
ƒƒ 600 W full power at elevated
temperatures
ƒƒ Wide operating temperature range
(-40 °C to 85 °C baseplate)
ƒƒ Adjustable output
ƒƒ Remote output On/Off
ƒƒ AC_OK; DC_OK signals
ƒƒ 5 V standby voltage
ƒƒ Active current share
ƒƒ Conduction-cooled/fanless
ƒƒ I2C / PMBus
ƒƒ Medical and ITE Safety3
ƒƒ Suited for BF-type applications
ƒƒ Active power factor correction
ƒƒ Optional IP65 variant
ƒƒ Optional 277 Vac input variant
Electrical Specifications
Input
Input ra­nge
U Suffix:
H Suffix:
90 - 264 Vac (Safety rating:100 - 240 Vac)
127 - 374 Vdc4
180 - 305 Vac (Safety rating: 200 - 277 Vac)
254 - 420 Vdc4
Frequency
47 - 63 / 440 Hz (Safety rating: 50/60 Hz)
Input fusing
Internal fuse on both L and N lines (12.5 A - U suffix; 7 A - H suffix)
COMPLIANCE
EMI/RFI
ƒƒ EMI Class B
ƒƒ EN61000 Immunity
MIL-STD-461F EMI
Compliance to CE101, 102; CS101, 114, 115, 116 (with external filter1)
Inrush current
≤ 25 A peak
Power factor
0.99 typical
Harmonics
Meets EN61000-3-2 Class A and Class C2
Input current
< 10 Arms @ 100 Vac
Hold up time
20 ms min for Main Output (230 Vac) @ 100% Load
Efficiency
93.3% typical @ 230 Vac; 100% Load; 28 Vdc
Leakage current
< 200 μA (per ANSI/ES60601; 264 Vac split-phase / 60 Hz)
< 400 μA (per IEC60601; 264 Vac / 50 Hz
SAFETY
ƒƒ UL + CSA:
ƒƒ
ƒƒ
ƒƒ
ƒƒ
60950-1 2nd Ed.
ANSI ES60601-13
UL 87505
CSA-C22.2 No. 250.133
TUV:
60950-1 2nd Ed.
60601-1 3rd Ed.3
EN 61347-1; -2-135
CB Scheme: IEC 60950-1
IEC 60601-1
IEC 61347-1; -2-135
China
CCC
CE Mark
FCC Class B, CISPR22/EN55022 Class B
1
Isolation voltage
PRI-SEC:
PRI-Chassis:
SEC-Chassis:
U Suffix
4,000 Vac (2X MOPP)
1,500 Vac (1X MOPP)
1,500 Vac (1X MOPP)
Artesyn Filter PN: 700-014447-0000 (Zhongguang PN: ZGLPG-10-02M).
Meets Class C ≥ 50% load.
U suffix have both ITE and Medical Safeties. H suffix carries ITE approval only.
4
DC input rating not part of product’s Safety approval.
5
LED Lighting approvals apply to all 48V output variants.
1
2
3
H Suffix
3,000 Vac
2,000 Vac
1,500 Vac
LCC600 Data Sheet
Electrical Specifications
Output
Output rating
See Ordering Information table
Standby output
5.0 Vdc @ 1.5 A Max
Set point
± 0.5%
Factory set point
Total regulation
Main Output: ± 2.0%
5 Vsb: ± 5%
Combined Line / Load / Temperature
Rated load
600 W maximum
600 W from -40 °C to 85 °C Baseplate Temp. Derate output
to 28 W @ 95 °C Baseplate Temp
Minimum load
0A
For both Main and 5 Vsb Outputs
Output voltage adjust range
See Ordering Information table
Max power limited to 600 W
Output noise
Main Output: 1.0% max p-p
5 Vsb: 60 mV max p-p
Measured with 0.1 μF Ceramic and 10 μF Tantalum Cap,
20 MHz BW
Remote sense
Compensation up to 500 mV
Pin 10: +Vout_RS / Pin4: -Vout_RS
Over current protection
105 - 130% of full load current
Default is Shutdown mode with Auto-retry every 2~4 sec.
Output latches after 20 sec of continuous OCP fault
presence. Restart after latch possible through AC recycle,
Inhibit toggle or through PMBus.
Over voltage protection
125 - 145% Vo, nom Main Output
125 - 130% 5 Vsb
Latching / AC Recyle or Inhibit toggle required for PSU
restart
Over temperature protection
> 95 °C Baseplate temperature
Output Shutdown / Auto-recovery
AC_OK
Open Collector; 0.8 Vdc max / 10 mA
Active low when AC is present
DC_OK
Open Collector; 0.8 Vdc max / 10 mA
Active low when Main Output is within regulation
Remote inhibit
Contact Closure
Pin 19: Open/Float = ON; Close/Ground = OFF
# Units in parallel operation
Qualified up to 5 units in parallel. Consult factory if
more than 5 are required.
Pin 5: IShare pin for main output only.
Output dimming
0-10 Vdc external voltage;
0-100 kOhm external resistance
Consult with [email protected]
Environmental Specifications
Operating temperature range
-40 °C to +85 °C Baseplate temperature
Storage temperature
-40 °C to +85 °C
Humidity
10% to 95%
Altitude
16,402 ft (Operating) / 50,000 ft (Non-Operating)
Shock
MIL-STD-810F 516.5 Procedure I, VI
Vibration
MIL-STD-810F 514.5 Cat. 4, 10
Ingress protection
IP65 (for suffix “-4P”)
MTBF (calculated)
>2M Hrs, 25 °C per SR-332 Issue 3
Electromagnetic immunity
Designed to meet EN61000-4-3, -4, -5, -8, -11 (Level 3); EN61000-4-2 (Level 4); EN60601-1-2 and EN55024
For H suffix, Level 4 for EN61000-4-5
LCC600 Data Sheet
Ordering Information
Model Number*
AC Input
LCC600-48U-9P
90 - 264
LCC600-48H-9P
180 - 305
LCC600-36U-9P
90 - 264
LCC600-36H-9P
180 - 305
LCC600-28U-9P24
90 - 264
LCC600-28U-9P
90 - 264
LCC600-28H-9P
180 - 305
LCC600-12U-9P
90 - 264
LCC600-12H-9P
180 - 305
Output
Setpoint
Setpoint
Tolerance
Adjustment
Range
48 V
±0.5%
36 V
Output Current [A]
Max O/P
Typical
Efficiency**
Standby Output
Combined
Line/Load
Regulation
Output Ripple
Min
Max
Power [W]
44 - 54
0
12.5
600
93.0%
5 Vdc @ 1.5 A
2%
1%
±0.5%
32 - 38
0
16.7
600
92.0%
5 Vdc @ 1.5 A
2%
1%
24 V
±0.5%
24 - 30
0
25
600
93.0%
5 Vdc @ 1.5 A
2%
1%
28 V
±0.5%
24 - 30
0
25***
600
93.5%
5 Vdc @ 1.5 A
2%
1%
12 V
±0.5%
12 - 15
0
50
600
92.3%
5 Vdc @ 1.5 A
2%
1%
*Change suffix “-9P” to “-4P” for IP65 rated enclosure with fly lead wires
*Change suffix “-4P” to “-4PR” for IP65 rated enclosure with right angle fly lead wires (applies to 28, 36, 48 Vdc)
*Change suffix “-4P” to “-4PV” to omit the control cable (applies to 28, 36, 48 Vdc)
**Typical efficiency at high line, factory default voltage and full load
***When Vout is adjusted down to 24 V, the supply can deliver 25 A max (600 W max). At 28 V default output setting, max Iout is 21.43 A (600 W max).
Mechanical Drawings
228 0.50
-9P Suffix
4-POSITION TERMINAL BLOCK
M4x8 SCREW, 10mm PITCH
WITH PLASTIC COVER
(SEE NOTE 7)
3-POSITION LOCKING CONNECTOR
(TYCO P/N: 1-350943-0 OR EQUIVALENT)
MATE WITH TYCO P/N: 350766-1 (HOUSING)
& 350536-1 (CONTACT TERMINAL)
SIGNAL PIN LOCATIONS
PIN 2
PIN 1
PIN 20
PIN 19
TRIMPOT WINDOW
MODEL LABEL
HEADER CONNECTOR
(J1501)
MATE WITH P/N: JST PN PHDR-20VS (HOUSING)
& JST PN SPHD-001T-P0.5 (CONTAC PINS)
(SEE PIN LOCATION DETAILS)
228 0.50
85.0 0.50
(29.7)
39.8 -0.3
+0.7
(2.2)
0.20
101 0.50
73.34
73.34
40.66
93.00
(35.50)
CUSTOMER MOUNTING HOLE
FIT WITH M4 SCREW
(6 PL)
Notes:
1) Recommended mounting screw is M4 in 6 locations; 8-10 kgf-cm torque.
2) Baseplate material/finish: 5 mm Aluminum with Black Anodized.
3) Weight: 9P Suffix: 1.63 kg typical
4P Suffix: 1.81 kg typical
4) Thermal hotspot reference is in the middle of the baseplate.
LCC600 Data Sheet
Mechanical Drawings
-4P Suffix (28, 36, 48 Vdc)
228 0.5
300 10
300 10
UL2517 14AWGX4C
SJTW 18AWGX3C
(30)
(30)
UL2517 26AWGX20C+AL
MODEL LABEL
290 10
(50.5)
8.5
(21.4)
228 0.5
0.2
84.41 0.5
39.8-0.3
+0.7
TRIMPOT LOCATION
85 0.5
CUSTOMER MOUNTING HOLE 4.6
FIT WITH M4 SCREW
(6 PL)
101 0.5
(3-93.0)
CUT EXPOSED LEADS OF SIGNAL WIRES
(2-73.3)
(2-146.7)
(2-40.7)
-4P Suffix (12 Vdc)
300 10
TIN DIP
228 0.5
3X- 307
59 0.5
HEIGHT MEASUREMENT
REFERENCE POINT
SEE NOTE 9
10
UL2517
26AWGX20C
TIN DIP
TRIMPOT LOCATION
ARTESYN P/N:
750-007030-00XX
(OUTPUT CABLE ASSY)
THW OR MTW
AWG 6 WIRE
0.2
CUSTOMER MOUNTING HOLE 4.6
FIT WITH M4 SCREW (SEE NOTE 8)
(6 PL)
(2X-73.3)
(2X-146.7)
(2X-40.7)
(3X-93)
(50.5)
(5)
(22)
(24)
85 0.50
101 0.50
40.50max
RATING AND SAFETY LOGO LABEL
46 0.5
ARTESYN P/N:
750-006769-000X
(INPUT CABLE ASSY)
LCC600 Data Sheet
Mechanical Drawings
-4PR Suffix (28, 36, 48 Vdc)
265.0 2.0
40.5 MAX
228 0.5
300 10
300 10
TRIMPOT
LOCATION
MODEL
LABEL
80.1
45
45
101 0.5
HEIGHT MEASUREMENT
REFERENCE POINT
UL2517 26AWGX20C+AL
30
10
UL2517 14AWGX4C
0.2
TIN DIP WIRES
0.2
SJTW 18AWGX3C
146.68
73.34
73.34
93 (3X)
40.66
CUSTOMER MOUNTING HOLE 4.6
FIT WITH M4 SCREW
LCC600 Data Sheet
Pin Assignment (INPUT)
-9Px Suffix
DESCRIPTION
DESIGNATION
Live
L1
Neutral
L2
Ground
G
-4Px Suffix
NOTES
DESIGNATION
NOTES
Brown
Mating Connector:
350766-1 (Housing);
350536-1 (Contact Terminals)
SJTW 18AWGX3C;
PVC jacket;
105 °C / 300 V
Blue
Y/GR
Pin Assignment (MAIN OUTPUT)
-9Px Suffix
DESCRIPTION
DESIGNATION
Main Output
+Vout
Main Output
Return GND
-Vout
-4Px Suffix (28, 36, 48 Vdc)
NOTES
DESIGNATION
4 Position Terminal Block: M4
Screw/10mm Pitch; 12kgf-cm
Torque; Accepts 14-16AWG
Ring Tongue - Spade Terminals
MOLEX BB-124-08 (191410058) or EQUIVALENT
Red
NOTES
14AWGX4C;
PVC jacket;
105 °C / 300 V
Red
Black
Black
-4Px Suffix (12 Vdc)
DESIGNATION
Red
NOTES
6AWG Multi-Strand;
PVC jacket;
105 °C / 600 V
Black
Pin Assignment
J1501 - Signal & Control
SIGNALS
DESCRIPTION
-9Px Suffix
PIN #
NOTES
-4Px Suffix
WIRE COLOR
A2_OUT
EEPROM Address
1
BLACK
GND
Ground
2
BROWN
A1_OUT
EEPROM Address
3
RED
-VOUT_RS
Remote Sense Return (Main O/P)
4
ORANGE
ISHARE
Load Share Voltage
5
YELLOW
A0_OUT
EEPROM Address
6
GREEN
SDA
Serial Data Signal (I2C)
7
BLUE
SPARE_1
Spare/Unused Pin
8
SCL
Serial clock Signal (I2C)
9
+VOUT_RS
Remote Sense (Main O/P)
10
5VSB
5V Standby (1.5A Max)
11
SGND
5V Standby Return
12
SPARE_2
Spare/Unused Pin
13
G_DCOK_C
Global DC_OK Collector
14
WHITE/YELLOW
WP
EEPROM Write Protect
15
WHITE/ORANGE
G_DCOK_E
Global DC_OK Emitter (GND)
16
WHITE/BLACK
GND
Return GND for O/P Signal and I2C communication
17
WHITE/RED
G_ACOK_C
Global AC_OK Collector
18
WHITE/BROWN
INH_EN
Output Inhibit_Enable Pin (turns output off)
19
WHITE/GREEN
G_ACOK_E
Global AC_OK Emitter (GND)
20
WHITE/BLUE
J1501 Mating
Connector:
JST PN
PHDR-20VS
Contact Pins:
JST PN SPHD001T-P0.5
NOTES
VIOLET
GRAY
WHITE
PINK
LIGHT BLUE
WHITE/VIOLET
26AWGX20C+AL;
PVC jacket;
105 °C / 300 V
LCC600 Data Sheet
Power Derating Curves
Figure 1. Output Power vs. Baseplate Temperature
Figure 2. Output Power vs. Input Voltage
Efficiency Curves
Figure 3. Typical Efficiency for 28 V output
Figure 5. Typical Efficiency for 36 V output
Figure 4. Typical Efficiency for 48 V output
Figure 6. Typical Efficiency for 12 V output
LCC600 Data Sheet
ACCESSORIES
Orderable Part Number
Description
70-841-030
For Suffix "-9P" AC Input Mating Connector Cable Assembly
(w/ 0.3 m wire length)
73-788-001
J1501 (20 Pin Control Signal) Mating Connector with 0.3 m
wires attached for "-9P" suffix
Diagram
PIN 20
PIN 19
PIN 2
PIN 3
PIN 1
300 ± 5 mm
70-841-031
Pre-Cut thermal insulator (Laird TFLEX HR220FG)
700-014447-0000
MIL-STD-461F AC input In-line EMI filter (Zhongguang
ZGLPG-10-02M)
73-769-002
USB to I2C High Speed Adaptor for PMBus Communication
750-007213-0000
J1501 (20 Pin) Mating connector with 10 Pin header termination
for use with 73-769-002
500±5
A
215±5
C
150±3
O
(17X) 300±3
50.0±3
M
17
F
E
D
A
B
2
4
9
7
15±3
466-003103-0000
Test Heatsink for unit characterization. Size: 331 x 220 x 69 mm;
Aluminum with natural finish; Weight = 1.7 kgs
WORLDWIDE OFFICES
Americas
Europe (UK)
Asia (HK)
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and
service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc.
All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.
www.artesyn.com
For more information: www.artesyn.com/power
For support: [email protected]
LCC600 DS 21Oct2016
Similar pages