Abracon ABSM2-R40-C-4RF Molded plastic smd microprocessor crystal Datasheet

MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
RoHS/RoHS II Compliant
ABSM2
Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7))
Obsolete/End of Life Date: 12/31/2014 – Last Time Buy Date: March 31,2015
FEATURES:
• Suitable for RoHS compliant reflow
• Available tight tolerance and
temperature stability
12.5 x 4.6 x 3.7mm
| | | | | | | | | | | | |
| |
APPLICATIONS:
• Computers, Modems, Microprocessors
• Communication, Test equipment
• PCMCIA
STANDARD SPECIFICATIONS:
Parameters
Available Frequencies
Minimum
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Typical
Maximum
See Table 2 below
Fundamental: Standard
3rd Overtone: Standard
Fundamental: Option. See options below
-10
----+60
-55
----+125
-50
----+50
Units
MHz
------------ºC
ºC
ppm
-50
-----
+50
ppm
-----
See table 1 below
-----
7.0
Ω
pF
Load capacitance (CL)
-----
18.0
-----
pF
Drive Level
-----
-----
100
µW
Aging
-5
-----
+5
ppm
500
-----
-----
MΩ
Insulation Resistance
Notes
3.50 MHz - 30.000 MHz
30.001 MHz - 70.000 MHz
30.001 MHz - 32.000 MHz
See options
See options
See options
Standard (See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
Table 2
Table 1. Standard ESR
Frequency (MHz)
3.50 - 3.999
4.000 - 5.999
6.000 - 11.999
12.000 - 32.000 (fund)
30.000 - 35.999 (3rd overtone)
33.000 - 70.000 (3rd overtone)
ESR (Ω)
max.
200
150
100
50
100
80
Available Frequency List [MHz]
3.579545
6.000000
10.240000
16.000000
20.000000
30.000000
48.000000
3.686400
6.144000
10.240000
16.000312
20.480000
32.000000
48.000000
3.932160
6.176000
11.000000
16.257000
22.118400
32.768000
49.152000
4.000000
6.400000
11.059200
16.384000
24.000000
33.000000
50.000000
4.032000
7.159090
11.289600
16.666000
24.000140
33.333000
53.125000
4.096000
7.372800
12.000000
16.667000
24.576000
33.333300
55.000000
4.194304
7.680000
12.288000
16.934400
24.704000
33.868800
60.000000
4.433619
8.000000
12.352000
16.934400
25.000000
34.000000
64.000000
4.800000
8.000156
12.500000
17.734475
25.175000
35.468950
66.000000
4.915200
8.192000
13.000000
18.000000
27.000000
36.000000
66.666600
5.000000
9.216000
13.500000
18.432000
28.000000
40.000000
5.068800
9.600000
14.318180
18.869600
28.322000
40.960000
5.120000
9.830000(Left
14.745600
19.200000
blank if standard)
28.636360
44.000000
5.333333
9.830400
15.000000
19.440000
29.491200
45.000000
5.529600
10.000000
15.360000
19.660800
29.500000
47.940000
OPTIONS & PART IDENTIFICATION:
ABSM2 -
MHz -
-
-
Frequency in MHz*
Please specify the
frequency in MHz.
e.g. 16.000MHz
ABRACON IS
ISO9001:2008
CERTIFIED
CE RTIFIED
Packaging
Blank: Bulk
T: 1000pcs/reel
Oscillation Mode
Load Capacitance (pF)*
Please specify CL (min
10pF) in pF or S for series
Custom ESR if other
than standard
R□
□: Specify a value in Ω
(e.g.: R40)
-
F: Fundamental AT for
30MHz<F<32MHz
Operating Temp. *
E: 0°C to +70°C
B: -20°C to +70°C
C: -30°C to +70°C
N: -30°C to +85°C
D: -40°C to +85°C
Freq. Tolerance*
4: ± 30 ppm
Freq. Stability*
Y: ± 30 ppm
H: ± 35 ppm
Z: ± 100 ppm
R: ± 150 ppm
*Frequency, Load Capacitance, Frequency
tolerance and stability is subject to availability.
Please contact Abracon for each option for
availability.
Revised: 10.23.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
ABSM2
RoHS/RoHS II Compliant
Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7))
12.5 x 4.6 x 3.7mm
| | | | | | | | | | | | |
| |
OUTLINE DRAWING:
Dimensions: Inches (mm)
TAPE & REEL: T=Tape and reel (1000pcs/reel)
REFLOW PROFILE:
Dimensions: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application
requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme
operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 10.23.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Similar pages