AD EV1HMC1161LP5 Dual output frequency range Datasheet

FUNCTIONAL BLOCK DIAGRAM
APPLICATIONS
1
2
3
4
5
6
7
8
HMC1161
NC 9
NC 10
GND 11
RFOUT/2 12
NC 13
NC 14
NC 15
NC 16
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
NC
NC
NC
NC
GND
NC
NC
NC
24
23
22
21
20
19
18
17
NC
NC
NC
VCC
NC
RFOUT
NC
NC
13382-001
Dual output frequency range
fOUT = 8.71 GHz to 9.55 GHz
fOUT/2 = 4.355 GHz to 4.775 GHz
Output power (POUT): 11 dBm
Single-sideband (SSB) phase noise: −115 dBc/Hz at 100 kHz
No external resonator needed
RoHS-compliant, 5 mm × 5 mm, 32-lead LFCSP: 25 mm²
NC
NC
NC
VTUNE
NC
NC
NC
NC
FEATURES
32
31
30
29
28
27
26
25
Data Sheet
8.71 GHz to 9.55 GHz MMIC VCO with Half
Frequency Output
HMC1161
Figure 1.
GENERAL DESCRIPTION
The HMC1161 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator (VCO) that integrates a
resonator, a negative resistance device, and a varactor diode,
and features a half frequency output.
Rev. B
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
The output power is 11 dBm typical from a 5 V supply voltage.
The VCO is housed in a RoHS-compliant LFCSP and requires
no external matching components.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
HMC1161* Product Page Quick Links
Last Content Update: 11/01/2016
Comparable Parts
Design Resources
View a parametric search of comparable parts
• HMC1161 Evaluation Board
•
•
•
•
Documentation
Discussions
Data Sheet
• HMC1161: 8.71 GHz to 9.55 GHz MMIC VCO with Half
Frequency Output Data Sheet
View all HMC1161 EngineerZone Discussions
Evaluation Kits
HMC1161 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
Sample and Buy
Visit the product page to see pricing options
Technical Support
Submit a technical question or find your regional support
number
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to
the content on this page does not constitute a change to the revision number of the product data sheet. This content may be
frequently modified.
HMC1161
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Interface Schematics .....................................................................6
Applications ....................................................................................... 1
Typical Performance Characteristics ..............................................7
Functional Block Diagram .............................................................. 1
Applications Information .................................................................9
General Description ......................................................................... 1
Evaluation Printed Circuit Board (PCB) ..................................... 10
Revision History ............................................................................... 2
Bill of Materials ........................................................................... 10
Specifications..................................................................................... 3
Packaging and Ordering Information ......................................... 11
Absolute Maximum Ratings ....................................................... 4
Outline Dimensions ................................................................... 11
ESD Caution .................................................................................. 4
Ordering Guide .......................................................................... 11
Pin Configuration and Function Descriptions ............................. 5
REVISION HISTORY
11/15—Rev. A to Rev. B
Changes to Figure 3 and Figure 4 ................................................... 6
Changes to Ordering Guide, Note 1............................................. 11
8/15—Revision A: Initial Version
This Hittite Microwave Products data sheet has been reformatted
to meet the styles and standards of Analog Devices, Inc.
Rev. B | Page 2 of 11
Data Sheet
HMC1161
SPECIFICATIONS
TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted.
Table 1.
Parameter
FREQUENCY
Range
Output Frequency (fOUT)
Half Output Frequency
(fOUT/2)
Drift Rate
Pulling
Pushing
OUTPUT POWER (POUT)
RFOUT
RFOUT/2
Supply Current (ICC)
Min
8.71
4.355
Max
Unit
9.55
4.755
GHz
GHz
0.75
3.5
2
8
0
200
HARMONICS, SUBHARMONICS
1/2
3/2
Second
Third
TUNING
Voltage (VTUNE)
Sensitivity
Tune Port Leakage Current
OUTPUT RETURN LOSS
SSB PHASE NOISE
10 kHz Offset
100 kHz Offset
Typ
11
4
230
250
270
16
8
300
23
40
20
30
2
50
MHz/°C
MHz p-p
MHz/V
Pulling into a 2.0:1 voltage standing wave ratio (VSWR)
At VTUNE = 5 V
dBm
dBm
mA
mA
mA
VCC = 4.75 V
VCC = 5.00 V
VCC = 5.25 V
dBc
dBc
dBc
dBc
13
250
10
V
MHz/V
µA
dB
−83
−109
dBc/Hz
dBc/Hz
2.5
−90
−115
Test Conditions/Comments
VTUNE = 13 V
Rev. B | Page 3 of 11
HMC1161
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
VCC
VTUNE
Temperature
Operating
Storage
Nominal Junction (to Maintain
1 Million Hours Mean Time to
Failure (MTTF))
Nominal Junction (TA = 85°C)
Maximum Reflow Temperature
(MSL3 Rating)
Thermal Resistance (Junction to
Ground Paddle)
ESD Sensitivity (Human Body Model)
Rating
5.5 V dc
0 V to 15 V
−40°C to +85°C
−65°C to +150°C
135°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
126.7°C
260°C
31.4°C/W
Class 1A
Rev. B | Page 4 of 11
Data Sheet
HMC1161
32
31
30
29
28
27
26
25
NC
NC
NC
VTUNE
NC
NC
NC
NC
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1
2
3
4
5
6
7
8
HMC1161
TOP VIEW
(Not to Scale)
24
23
22
21
20
19
18
17
NC
NC
NC
VCC
NC
RFOUT
NC
NC
NOTES
1. NC = NO CONNECT. HOWEVER, THESE PINS CAN BE
CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE
PERFORMANCE OF THE DEVICE.
2. EXPOSED PAD. THE PACKAGE BOTTOM HAS AN EXPOSED
METAL PAD THAT MUST BE CONNECTED TO RF/DC GROUND.
13382-002
NC 9
NC 10
GND 11
RFOUT/2 12
NC 13
NC 14
NC 15
NC 16
NC
NC
NC
NC
GND
NC
NC
NC
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1 to 4, 6 to 10, 13 to 18, 20,
22 to 28, 30 to 32
5, 11
12
19
21
29
Mnemonic
NC
GND
RFOUT/2
RFOUT
VCC
VTUNE
EP
Description
No Connect. However, these pins can be connected to RF/dc ground without affecting the
performance of the device.
Ground. These pins must be connected to RF/dc ground.
Half Frequency Output. This pin is ac-coupled.
RF Output. This pin is ac-coupled.
Supply Voltage (5 V).
Control Voltage and Modulation Input. The modulation bandwidth is dependent on the drive
source impedance.
Exposed Pad. The package bottom has an exposed metal pad that must be connected to
RF/dc ground.
Rev. B | Page 5 of 11
HMC1161
Data Sheet
INTERFACE SCHEMATICS
3nH
4pF
Figure 3. RFOUT/2 Interface
43pF
Figure 6. VTUNE Interface
GND
Figure 4. RFOUT Interface
Figure 7. GND Interface
15pF
13382-005
VCC
13382-007
13382-003
RFOUT
Figure 5. VCC Interface
Rev. B | Page 6 of 11
13382-006
RFOUT/2
13382-004
VTUNE
Data Sheet
HMC1161
TYPICAL PERFORMANCE CHARACTERISTICS
10.0
300
290
+85°C
+25°C
–40°C
280
SUPPLY CURRENT (mA)
OUTPUT FREQUENCY (GHz)
9.5
9.0
8.5
+85°C
+25°C
–40°C
8.0
270
260
250
240
230
220
7.5
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
200
13382-008
7.0
0
2
3
4
5
6
7
8
9
10
12
13
Figure 11. Supply Current (ICC) vs. Tuning Voltage
5.00
RFOUT/2 OUTPUT FREQUENCY (GHz)
14
12
10
8
+85°C
+25°C
–40°C
6
4
0
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
4.50
4.25
+85°C
+25°C
–40°C
4.00
3.75
3.50
13382-009
2
4.75
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (V dc)
13382-012
16
Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage
Figure 9. Output Power vs. Tuning Voltage
600
10
9
RFOUT/2 OUTPUT POWER (dBm)
500
400
300
+85°C
+25°C
–40°C
200
100
+85°C
+25°C
–40°C
8
7
6
5
4
3
2
0
0
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (V dc)
11
12
13
Figure 10. Sensitivity vs. Tuning Voltage
0
0
1
2
3
4
5
6
7
8
9
10
11
12
TUNING VOLTAGE (V dc)
Figure 13. RFOUT/2 Output Power vs. Tuning Voltage
Rev. B | Page 7 of 11
13
13382-013
1
13382-010
SENSITIVITY (MHz/V)
11
TUNING VOLTAGE (V dc)
Figure 8. Output Frequency vs. Tuning Voltage
OUTPUT POWER (dBm)
1
13382-011
210
HMC1161
Data Sheet
–70
–75
–60
SSB PHASE NOISE (dBc/Hz)
–80
10kHz
–90
–95
–100
–105
–110
100kHz
–120
1
2
3
4
5
6
7
–70
–80
–90
–100
–110
–120
–130
–115
0
+85°C
+25°C
–40°C
8
9
10
11
TUNING VOLTAGE (V dc)
12
13
–140
10k
100k
1M
10M
OFFSET FREQUENCY (Hz)
Figure 15. SSB Phase Noise vs. Offset Frequency at VTUNE = 5 V
Figure 14. SSB Phase Noise vs. Tuning Voltage
Rev. B | Page 8 of 11
13382-015
–85
13382-014
SSB PHASE NOISE (dBc/Hz)
–50
+85°C
+25°C
–40°C
Data Sheet
HMC1161
APPLICATIONS INFORMATION
The HMC1161 serves as the local oscillator (LO) in microwave
synthesizer applications. The primary applications are point-topoint microwave radios, military, radars, test and measurement,
as well as industrial and medical equipment. The low phase
noise allows higher orders of modulation and offers improved bit
error rates in communication systems, whereas the linear,
monotonic tuning sensitivity allows a stable loop filter design. The
higher output power minimizes the gain required to drive
subsequent stages. The half frequency output reduces the input
frequency to the prescaler without the addition of residual
phase noise to the input of the phase-locked loop synthesizer.
LOOP
FILTER
HOST
SCK
SDI
SEN
SYNTH
CP
RFOUT
RFOUT/2
REF
XREFP
VCO INPUT
Figure 16. Typical Application Diagram
Rev. B | Page 9 of 11
13382-016
VTUNE
HMC1161
Data Sheet
13382-017
EVALUATION PRINTED CIRCUIT BOARD (PCB)
Figure 17. Evaluation PCB
The circuit board used in an application uses RF circuit design
techniques. Ensure that the signal lines have 50 Ω impedance
and that the package ground leads and backside ground paddle
are connected directly to the ground plane.
Use a sufficient number of via holes to connect the top and
bottom ground planes. The evaluation circuit board shown in
Figure 17 is available from Analog Devices, Inc., upon request.
BILL OF MATERIALS
Table 4. Bill of Materials for the EV1HMC1161LP5
Item
J1 to J4
J5, J6
C1 to C3
C4
C5 to C7
C8
U1
PCB1
1
2
Description
PCB mount SMA RF connectors
2 mm dc headers
100 pF capacitors, 0402 package
1000 pF capacitor, 0402 package
2.2 μF tantalum capacitors
0.01 μF capacitor, 0603 package
HMC1161 VCO
110225 evaluation board2
Circuit board material is Rogers 4350.
Reference this number when ordering the complete evaluation PCB.
Rev. B | Page 10 of 11
Data Sheet
HMC1161
PACKAGING AND ORDERING INFORMATION
OUTLINE DIMENSIONS
0.30
0.25
0.18
1
24
0.50
BSC
3.80
3.65 SQ
3.50
EXPOSED
PAD
17
TOP VIEW
1.00
0.90
0.80
8
16
9
BOTTOM VIEW
3.50 REF
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
SEATING
PLANE
PKG-000000
0.45
0.40
0.35
PIN 1
INDICATOR
32
25
0.20 MIN
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
03-04-2015-A
PIN 1
INDICATOR
5.10
5.00 SQ
4.90
COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4.
Figure 18. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ]
5 mm × 5 mm Body, Very Thin Quad
(HCP-32-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
HMC1161LP5E
Temperature Range
−40°C to +85°C
MSL Rating2
MSL3
Package Description
32-Lead LFCSP_VQ
Package Option
HCP-32-1
Qty.
HMC1161LP5ETR
−40°C to +85°C
MSL3
32-Lead LFCSP_VQ, 7” Tape and Reel
HCP-32-1
500
EV1HMC1161LP5
1
2
3
Evaluation Board
The HMC1161LP5E and HMC1161LP5ETR are RoHS compliant parts.
See the Absolute Maximum Ratings section, Table 2.
XXXX is a placeholder for the 4-digit lot number.
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13382-0-11/15(B)
www.analog.com/HMC1161
Rev. B | Page 11 of 11
Branding3
H1161
XXXX
H1161
XXXX
Similar pages