Hirose MDF27A-TA1822HC Crimping contact directly mounted on board Datasheet

Crimping Contact Directly Mounted on Board
MDF12,MDF27 Series
■Features
1. Cable Direct Mounting Service Improved
The existing cable core soldered directly on the board is remade into the crimping contact, which can enhance the service
efficiency and the reliability.
● Achieves pre-soldering fixation according to the board pre-fixed style, and enhances the service efficiency.
● Accepts a load to the cable at the contact, and prevents contact wire cutting.
2. Cable Lateral Unreeling Possible
The cable can be unreeled lateral to the board by using the angle type MDF27.
3. Current Capacity Secured Corresponding to Thick Cable
The cable size corresponds to AWG22 to 14, while AWG14 secures 15A current capacity.
In addition, since the contacts are provided corresponding to UL1007 and UL1015 jackets, the contact can be chosen
according to applications.
■Applications
Various kinds of electronic equipment power supplies, etc.
B194
■Product Specifications
Current rating
AWG 14 : 15A
Note 1
AWG 16 : 10A
AWG 18 : 9A
Rating
AWG 20 : 5A
AWG 22 : 5A
Voltage rating
300V AC
Item
Operating Temperature Range
-35 to +85ç(Note 2)
Operating Moisture Range
-20 to 80%
Storage Temperature Range
-10 to +60ç
Storage Moisture Range
-40 to 70%
Specification
Condition
1. Contact Resistance
15m ohms max.
100mA
2. Vibration
No damage, cracks, or parts looseness.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
3. Humidity (Steady state) No damage, cracks, or parts looseness.
96 hours at temperature of 40ç and humidity of 90% to 95%
4. Temperature Cycle
No damage, cracks, or parts looseness.
(-55ç: 30 minutes-> 5 to 35ç: 10 minutes-> 85ç: 30 minutes-> 5 to 35ç: 10 minutes) 5cycles
5. Resistance to Soldering heat
No deformation of components affecting performance.
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Material
Finish
Crimping Contact for Plug
Terminal
Brass
Tin plated
Note : The whisker method is implemented for the tin plating.
■Ordering Information
●Contact
MDF 12 A - 1822 PCF
q
q Series Name: MDF
w Series No.
12: Vertical type
27: Horizontal type
e Cable Type
Blank
A
: UL1007
w
e
r
t
r Applicable Cable Size
1822: AWG18 to 22
1416: AWG14 to 16
t Packaging Type
PCF
PC
: Plug contact / reel
: Plug contact / bag
: UL1015
B195
■MDF12 Series
Part Number
Applicable Cable
CL No.
AWG
MDF120-1822PCF
547-0196-9
MDF120-1822PC
547-0221-4
MDF12A-1822PCF 547-0208-6
MDF12A-1822PC
547-0222-7
MDF120-1416PCF
547-0209-9
MDF120-1416PC
547-0223-0
MDF12A-1416PCF 547-0210-8
MDF12A-1416PC
AWG 18
to
AWG 22
1.5mm to
2.2mm
2.1mm to
2.9mm
AWG 14
to
AWG 16
547-0224-2
Packaging Type
A Size B Size
Jacket Diameter
2.4mm to
2.7mm
2.6mm to
3.6mm
5,000
100
9.4
3.2
11.2
3.6
3,500
100
2,500
100
2,500
100
●Applicable Board Hole Diameter : Ø1.8+0.1
+0
●Applicable Board Thickness : 1.6
Note: AWG14-16
■MDF27 Series
Part Number
CL No.
MDF270-1822PCF
547-0286-0
MDF270-1822PC
MDF27A-1822PCF
–––––––
547-0288-5
MDF27A-1822PC
–––––––
MDF270-1416PCF
547-0294-8
MDF270-1416PC
MDF27A-1416PCF
MDF27A-1416PC
–––––––
547-0296-3
–––––––
Applicable Cable
AWG
AWG 18
to
AWG 22
AWG 14
to
AWG 16
Jacket Diameter
Packaging Type
1.5mm to
5000
2.2mm
100
2.1mm to
3500
2.9mm
100
2.4mm to
2500
2.7mm
100
2.6mm to
2500
3.6mm
100
●Applicable Board Thickness : 1.6
●PCB mounting pattern
●Applicable Cable (Tin Plating Annealed Copper Wire)
●Strip Length
3.3 to 4.2mm
Conductor Size (Wire Construction)
AWG 14 (41 cores./0.25mm)
AWG 16 (41 cores./0.254mm)
AWG 18 (34 cores./0.18mm)
AWG 20 (21 cores./0.18mm)
AWG 22 (17 cores./0.16mm)
Note: If other cables are used instead of the applicable cable, contact Hirose sales department.
B196
BApplicable Crimping Tool
Type
Applicator
Part Number
CL No.
Applicable Contact
AP105-MDF12-1822P
901-4514-0
MDF12 -1822PCF
AP105-MDF12A-1822P
901-4515-2
MDF12A-1822PCF
AP105-MDF12-1416P
––––––––––
MDF12 -1416PCF
AP105-MDF12A-1416P
901-4533-4
MDF12A-1416PCF
AP105-MDF27-1822P
––––––––––
MDF27 -1822PCF
AP105-MDF27A-1822P
––––––––––
MDF27A-1822PCF
AP105-MDF27-1416P
––––––––––
MDF27 -1416PCF
AP105-MDF27A-1416P
––––––––––
MDF27A-1416PCF
CM-105
901-0005-4
––––––––––––––
Pres Main Unit
Manual Crimping Tool
MDF12 -TA1822HC
550-0238-0
MDF12 -1822PC
MDF12A-TA1822HC
550-0239-2
MDF12A-1822PC
MDF12 -TA1416HC
––––––––––
MDF12 -1416PC
MDF12A-TA1416HC
550-0237-7
MDF12A-1416PC
HT104/MDF27-1822P
––––––––––
MDF27 -1822PC
MDF27A-TA1822HC
––––––––––
MDF27A-1822PC
MDF27 -TA1416HC
––––––––––
MDF27 -1416PC
MDF27A-TA1416HC
––––––––––
MDF27A-1416PC
Note 1. If a trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any product.
Note 2. If products with no CL No. are ordered, consult HRS sales department.
BPrecautions
1. Recommended Soldering Condition (DIP)
Flow: 250ç for 3 seconds
Manual soldering: 290ç for 3 seconds
■ After the soldering process, if a load is applied to the cable where the connector and the cable
contains heat, the jacket retaining area will be easily loosened. Be sure to carry out the postsoldering operation after the connector returns to the room temperature.
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
Don't use a solvent such as trichloroethane, which degrades the cable jacket.In addition, avoid heat cleaning by solvent.
3. Connection Condition
Refer to Nylon Connector Use Hand book.
B197
Similar pages