TI CSD95372BQ5MC Csd95372bq5mc synchronous buck nexfet smart power stage Datasheet

Product
Folder
Sample &
Buy
Support &
Community
Tools &
Software
Technical
Documents
CSD95372BQ5MC
SLPS417A – APRIL 2014 – REVISED JULY 2015
CSD95372BQ5MC Synchronous Buck NexFET™ Smart Power Stage
1 Features
2 Applications
•
•
•
•
•
•
•
1
•
•
•
•
•
•
•
•
•
•
•
•
60-A Continuous Operating Current Capability
93.4% System Efficiency at 30 A
Low Power Loss of 2.8 W at 30 A
High-Frequency Operation (up to 1.25 MHz)
Diode Emulation Mode With FCCM
Temperature-Compensated Bidirectional Current
Sense
Analog Temperature Output (600 mV at 0°C)
Fault Monitoring
– High-Side Short, Overcurrent, and
Overtemperature Protection
3.3-V and 5-V PWM Signal Compatible
Tri-State PWM Input
Integrated Bootstrap Diode
Optimized Deadtime for Shoot-Through Protection
High-Density SON 5 × 6 mm Footprint
Ultra-Low Inductance Package
System-Optimized PCB Footprint
DualCool™ Packaging
RoHS Compliant – Lead-Free Terminal Plating
Halogen-Free
Multiphase Synchronous Buck Converters
– High-Frequency Applications
– High-Current, Low Duty-Cycle Applications
POL DC-DC Converters
Memory and Graphic Cards
Desktop and Server VR11.x / VR12.x V-Core and
Memory Synchronous Converters
•
•
•
3 Description
The CSD95372BQ5MC NexFET™ smart power
stage is a highly optimized design for use in a highpower, high-density synchronous buck converter.
This product integrates the driver IC and Power
MOSFETs to complete the power stage switching
function. This combination produces high-current,
high-efficiency, and high-speed switching capability in
a small 5 mm × 6 mm outline package. It also
integrates the accurate current sensing and
temperature sensing functionality to simplify system
design and improve accuracy. In addition, the PCB
footprint is optimized to help reduce design time and
simplify the completion of the overall system design.
Device Information (1)
DEVICE
MEDIA
QTY
CSD95372BQ5MC
13-Inch Reel
2500
CSD95372BQ5MCT
7-Inch Reel
250
(1)
Application Diagram
PACKAGE
SHIP
SON 5 × 6 mm
DualCool Package
Tape
and
Reel
For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Power Stage Efficiency and Power Loss
VIN
100
14
90
12
80
10
VCC
VCC
VOUT
60
30
+Is2
-Is2
PWM2
RT
6
4
2
40
TSEN
SS
8
VDD = 5V
VIN = 12V
VOUT = 1.2V
LOUT = .225µH
fSW = 500kHz
TA = 25ºC
50
PWM1
+Is1
-Is2
VOUT
70
Power Loss (W)
VOUT
Efficiency (%)
CSD95372B
0
10
20
30
40
Output Current (A)
50
60
0
G001
PGND
Multiphase
Controller
CSD95372B
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
CSD95372BQ5MC
SLPS417A – APRIL 2014 – REVISED JULY 2015
www.ti.com
Table of Contents
1
2
3
4
5
6
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
3
4
6.1
6.2
6.3
6.4
4
4
4
4
Absolute Maximum Ratings ......................................
ESD Ratings..............................................................
Recommended Operating Conditions.......................
Thermal Information ..................................................
7
8
Application Schematic .......................................... 5
Device and Documentation Support.................... 6
8.1
8.2
8.3
8.4
9
Community Resources..............................................
Trademarks ...............................................................
Electrostatic Discharge Caution ................................
Glossary ....................................................................
6
6
6
6
Mechanical, Packaging, and Orderable
Information ............................................................. 7
9.1 Mechanical Drawing.................................................. 7
9.2 Recommended PCB Land Pattern............................ 8
9.3 Recommended Stencil Opening ............................... 8
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Original (April 2014) to Revision A
Page
•
Updated Application Schematic to show IOUT (not IMON) for each CSD95372B ..................................................................... 5
•
Corrected MAX A dimensions in Mechanical Drawing table to 1.050 mm (0.041 inch)......................................................... 7
2
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: CSD95372BQ5MC
CSD95372BQ5MC
www.ti.com
SLPS417A – APRIL 2014 – REVISED JULY 2015
5 Pin Configuration and Functions
Top View
IOUT
1
12
PWM
REFIN
2
11
TAO/FAULT
ENABLE
3
10
FCCM
PGND
4
9
BOOT
VDD
5
8
BOOT_R
VSW
6
7
VIN
13
PGND
Pin Functions
PIN
NAME
DESCRIPTION
NUMBER
BOOT
9
Bootstrap capacitor connection. Connect a minimum of 0.1 µF 16 V X7R ceramic capacitor from BOOT to BOOT_R
pins. The bootstrap capacitor provides the charge to turn on the control FET. The bootstrap diode is integrated.
BOOT_R
8
Return path for HS gate driver, connected to VSW internally.
ENABLE
3
Enables device operation. If ENABLE = logic HIGH, turns on device. If ENABLE = logic LOW, the device is turned
off and both MOSFET gates are actively pulled low. An internal 100 kΩ pulldown resistor will pull the ENABLE pin
LOW if left floating.
FCCM
10
This pin enables the Diode Emulation function. When this pin is held LOW, Diode Emulation Mode is enabled for
sync FET. When FCCM is HIGH, the device is operated in Forced Continuous Conduction Mode. An internal 5 µA
current source will pull the FCCM pin to 3.3 V if left floating.
IOUT
1
Output of current sensing amplifier. V(IOUT) – V(REFIN) is proportional to the phase current.
PGND
4
Power ground, connected directly to pin 13.
PGND
13
Power ground
PWM
12
Pulse width modulated 3-state input from external controller. Logic LOW sets control FET gate low and sync FET
gate high. Logic HIGH sets control FET gate high and sync FET gate low. Open or High Z sets both MOSFET
gates low if greater than the tri-state shutdown hold-off time (t3HT).
REFIN
2
External reference voltage input for current sensing amplifier
TAO/
FAULT
11
Temperature Analog Output. Reports a voltage proportional to the die temperature. An ORing diode is integrated in
the IC. When used in multiphase application, a single wire can be used to connect the TAO pins of all the ICs. Only
the highest temperature will be reported. TAO will be pulled up to 3.3 V if thermal shutdown occurs. TAO should be
bypassed to PGND with a 1 nF 16 V X7R ceramic capacitor.
VDD
5
Supply voltage to gate driver and internal circuitry
VIN
7
Input voltage pin. Connect input capacitors close to this pin.
VSW
6
Phase node connecting the HS MOSFET source and LS MOSFET drain – pin connection to the output inductor.
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: CSD95372BQ5MC
3
CSD95372BQ5MC
SLPS417A – APRIL 2014 – REVISED JULY 2015
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
TA = 25°C (unless otherwise noted) (1)
MIN
MAX
UNIT
VIN to PGND
–0.3
25
V
VIN to VSW
–0.3
25
V
–7
27
V
–0.3
20
V
VIN to VSW (10 ns)
VSW to PGND
VSW to PGND (10 ns)
–7
23
V
VDD to PGND
–0.3
7
V
ENABLE, PWM, FCCM. TAO, IOUT, REFIN to PGND
–0.3
VDD + 0.3 V
V
–0.3
VDD + 0.3 V
V
12
W
BOOT to BOOT_R
(2)
PD
Power dissipation
TJ
Operating junction
–55
150
°C
Tstg
Storage temperature
–55
150
°C
(1)
(2)
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Should not exceed 7 V
6.2 ESD Ratings
VALUE
V(ESD)
Electrostatic discharge
Human body model (HBM)
±2000
Charged device model (CDM)
±500
UNIT
V
6.3 Recommended Operating Conditions
TA = 25° (unless otherwise noted)
MIN
MAX
4.5
5.5
V
Input supply voltage (1)
16
V
VOUT
Output voltage
5.5
V
IOUT
Continuous output current
A
Peak output current (3)
VIN = 12 V, VDD = 5V, VOUT = 3.3 V,
ƒSW = 500 kHz, LOUT = 0.47 µH (2)
60
IOUT-PK
ƒSW
Switching frequency
CBST = 0.1 µF (min)
On time duty cycle
ƒSW = 1 MHz
VDD
Gate drive voltage
VIN
(1)
(2)
(3)
UNIT
90
A
1250
kHz
85%
Minimum PWM on time
40
Operating temperature
–40
ns
125
°C
Operating at high VIN can create excessive AC voltage overshoots on the switch node (VSW) during MOSFET switching transients. For
reliable operation, the switch node (VSW) to ground voltage must remain at or below the Absolute Maximum Ratings.
Measurement made with six 10-µF (TDK C3216X5R1C106KT or equivalent) ceramic capacitors placed across VIN to PGND pins.
System conditions as defined in Note 1. Peak Output Current is applied for tp = 50 µs
6.4 Thermal Information
TA = 25°C (unless otherwise noted)
THERMAL METRIC
RθJC(top) Junction-to-case (top of package) thermal resistance
RθJB
(1)
(2)
4
MIN
(1)
Junction-to-board thermal resistance (2)
TYP
MAX
UNIT
5
°C/W
1.5
°C/W
RθJC(top) is determined with the device mounted on a 1 inch² (6.45 cm²), 2-oz (0.071 mm thick) Cu pad on a 1.5 inches x 1.5 inches,
0.06-inch (1.52 mm) thick FR4 board.
RθJB value based on hottest board temperature within 1 mm of the package.
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: CSD95372BQ5MC
CSD95372BQ5MC
www.ti.com
SLPS417A – APRIL 2014 – REVISED JULY 2015
7 Application Schematic
12V
VIN
TPS53661
PWM1
SKIP#-RAMP
VSP
VSN
BOOT
FCCM
BOOT_R
TAO/FAULT
PWM
PGND
VDD
5V
VCORE_OUT
VSW
CSD95372B
ENABLE
PGND
Load
IOUT REFIN
OCP-I
CSP1
COMP
TSEN
12V
VREF
VIN
F-IMAX
PWM2
BOOT
FCCM
BOOT_R
TAO/FAULT
PWM
CSD95372B
B-TMAX
VSW
PGND
VDD
5V
ENABLE
PGND
IOUT REFIN
CSP2
O-USR
12V
VIN
ADDR
PWM3
BOOT
FCCM
BOOT_R
TAO/FAULT
PWM
CSD95372B
ENABLE
SLEW-MODE
VSW
PGND
VDD
5V
PGND
IOUT REFIN
CSP3
12V
ISUM
IMON
IMON
VIN
PWM4
FCCM
^
I2C or
PMBus
(Optional)
^
ENABLE
VR_FAULT#
BOOT_R
TAO/FAULT
CSD95372B
ENABLE
SCLK
VSW
PGND
VDD
5V
To/From
CPU
BOOT
PWM
PGND
IOUT REFIN
ALERT#
CSP4
SDIO
VR_RDY
12V
VR_HOT#
PMB_CLK
VIN
PMB_ALERT#
PWM5
FCCM
PMB_DIO
BOOT_R
TAO/FAULT
VSW
CSD95372B
PGND
VDD
5V
ENABLE
BOOT
PWM
ENABLE
VR_FAULT#
PGND
IOUT REFIN
CSP5
12V
V12
5V
V5
12V
VIN
PWM6
FCCM
5V
3.3V
BOOT
CSD95372B
VSW
PGND
VDD
ENABLE
V3R3
BOOT_R
TAO/FAULT
PWM
PGND
IOUT REFIN
CSP6
GND
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: CSD95372BQ5MC
5
CSD95372BQ5MC
SLPS417A – APRIL 2014 – REVISED JULY 2015
www.ti.com
8 Device and Documentation Support
8.1 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
8.2 Trademarks
DualCool, NexFET, E2E are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
8.3 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
8.4 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
6
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: CSD95372BQ5MC
CSD95372BQ5MC
www.ti.com
SLPS417A – APRIL 2014 – REVISED JULY 2015
9 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
9.1 Mechanical Drawing
Exposed tie clip may vary
c2
A
E1
E2
c1
Ɵ
K
d2
d1
L1
b3
b1
b2
E
D2
b
e
a1
DIM
0.300 x 45°
L
d
MILLIMETERS
INCHES
MIN
NOM
MAX
MIN
NOM
MAX
A
0.950
1.000
1.050
0.037
0.039
0.041
a1
0.000
0.000
0.050
0.000
0.000
0.002
b
0.200
0.250
0.320
0.008
0.010
0.013
b1
b2
2.750 TYP
0.200
b3
0.250
0.108 TYP
0.320
0.008
0.250 TYP
0.010
0.013
0.010 TYP
c1
0.150
0.200
0.250
0.006
0.008
0.010
c2
0.200
0.250
0.300
0.008
0.010
0.012
D2
5.300
5.400
5.500
0.209
0.213
0.217
d
0.200
0.250
0.300
0.008
0.010
0.012
d1
0.350
0.400
0.450
0.014
0.016
0.018
d2
1.900
2.000
2.100
0.075
0.079
0.083
E
5.900
6.000
6.100
0.232
0.236
0.240
E1
4.900
5.000
5.100
0.193
0.197
0.201
E2
3.200
3.300
3.400
0.126
0.130
0.134
e
0.500 TYP
K
0.350 TYP
0.020 TYP
0.014 TYP
L
0.400
0.500
0.600
0.016
0.020
0.024
L1
0.210
0.310
0.410
0.008
0.012
0.016
θ
0.00
—
—
0.00
—
—
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: CSD95372BQ5MC
7
CSD95372BQ5MC
SLPS417A – APRIL 2014 – REVISED JULY 2015
www.ti.com
9.2 Recommended PCB Land Pattern
0.331(0.013)
0.370 (0.015)
0.410 (0.016)
1.000 (0.039)
0.550 (0.022)
0.300 (0.012)
2.800
(0.110)
5.300
(0.209)
6.300
(0.248)
0.500
(0.020)
5.639
(0.222)
0.300
(0.012)
R0.127 (R0.005)
3.400
(0.134)
5.900
(0.232)
1. Dimensions are in mm (inches).
9.3 Recommended Stencil Opening
0.350(0.014)
2.750
(0.108)
0.250
(0.010)
1. Dimensions are in mm (inches).
2. Stencil thickness is 100 µm.
8
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: CSD95372BQ5MC
PACKAGE OPTION ADDENDUM
www.ti.com
5-Aug-2015
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
CSD95372BQ5MC
ACTIVE
VSON-CLIP
DMC
12
2500
Pb-Free (RoHS
Exempt)
CU SN
Level-2-260C-1 YEAR
0 to 0
95372BMC
CSD95372BQ5MCT
ACTIVE
VSON-CLIP
DMC
12
250
Pb-Free (RoHS
Exempt)
CU SN
Level-2-260C-1 YEAR
0 to 0
95372BMC
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
5-Aug-2015
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Oct-2015
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
CSD95372BQ5MC
Package Package Pins
Type Drawing
VSONCLIP
DMC
12
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
2500
330.0
15.4
Pack Materials-Page 1
5.3
B0
(mm)
K0
(mm)
P1
(mm)
6.3
1.2
8.0
W
Pin1
(mm) Quadrant
12.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Oct-2015
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CSD95372BQ5MC
VSON-CLIP
DMC
12
2500
336.6
336.6
41.3
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
Similar pages