TI LM9036M-5.0/NOPB Ultra-low quiescent current voltage regulator Datasheet

LM9036
www.ti.com
SNVS140E – AUGUST 2003 – REVISED MARCH 2013
LM9036 Ultra-Low Quiescent Current Voltage Regulator
Check for Samples: LM9036
FEATURES
DESCRIPTION
1
•
2
•
•
•
•
•
•
•
Ultra low Ground Pin Current (IGND ≤ 25µA for
IOUT = 0.1mA)
Fixed 5V, 3.3V, 50mA Output
Output Tolerance ±5% Over Line, Load, and
Temperature
Dropout Voltage Typically 200mV @ IOUT =
50mA
−45V Reverse Transient Protection
Internal Short Circuit Current Limit
Internal Thermal Shutdown Protection
40V Operating Voltage Limit
The LM9036 ultra-low quiescent current regulator
features low dropout voltage and low current in the
standby mode. With less than 25µA Ground Pin
current at a 0.1mA load, the LM9036 is ideally suited
for automotive and other battery operated systems.
The LM9036 retains all of the features that are
common to low dropout regulators including a low
dropout PNP pass device, short circuit protection,
reverse battery protection, and thermal shutdown.
The LM9036 has a 40V maximum operating voltage
limit, a −40°C to +125°C operating temperature
range, and ±5% output voltage tolerance over the
entire output current, input voltage, and temperature
range.
Typical Application
* Required if regulator is located more than 2″ from power supply filter capacitor.
** Required for stability. Must be rated over intended operating temperature range. Effective series resistance (ESR)
is critical, see Electrical Characteristics. Locate capacitor as close as possible to the regulator output and ground
pins. Capacitance may be increased without bound.
Connection Diagram
Figure 1. PFM
Top View
Order Number LM9036DT-5.0, LM9036DTX-5.0,
LM9036DT-3.3, LM9036DTX-3.3
See NS Package Number NDP0003B
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2013, Texas Instruments Incorporated
LM9036
SNVS140E – AUGUST 2003 – REVISED MARCH 2013
www.ti.com
Figure 2. 8 Lead VSSOP
Top View
LM9036MM-3.3, , LM9036MMX-3.3, LM9036MM-5.0,
LM9036MMX-5.0
See NS Package Number DGK
Figure 3. 8 Lead SOIC
Top View
LM9036M-3.3, LM9036MX-3.3, LM9036M-5.0,
LM9036MX-5.0
See NS Package Number D
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings (1) (2)
+55V, −45V
Input Voltage (Survival)
ESD Susceptibility (3)
±1.9kV
Power Dissipation (4)
Internally limited
Junction Temperature (TJmax)
150°C
−65°C to +150°C
Storage Temperature Range
Lead Temperature (Soldering, 10 sec.)
(1)
(2)
(3)
(4)
260°C
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its specified operating ratings.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
Human body model, 100pF discharge through a 1.5kΩ resistor.
The maximum power dissipation is a function of TJmax, θJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJmax − TA)/θJA. If this dissipation is exceeded, the die temperature will rise above 150°C and the LM9036 will go
into thermal shutdown.
Operating Ratings
−40°C to +125°C
Operating Temperature Range
Maximum Input Voltage (Operational)
40V
SOIC-8 (D) θJA (1)
140°C/W
PFM (NDP0003B) θJA (1)
125°C/W
(2)
50°C/W
PFM (NDP0003B) θJA
PFM (NDP0003B) θJC (1)
11°C/W
MSO-8 (DGK) θJA (1)
(1)
(2)
2
200°C/W
Worst case (Free Air) per EIA / JESD51-3.
Typical θJA with 1 square inch of 2oz copper pad area directly under the ground tab.
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LM9036
LM9036
www.ti.com
SNVS140E – AUGUST 2003 – REVISED MARCH 2013
Electrical Characteristics - LM9036-5.0
VIN = 14V, IOUT = 10 mA, TJ = 25°C, unless otherwise specified. Boldface limits apply over entire operating temperature
range
Min
Typical
Max
4.80
5.00
5.20
4.75
5.00
5.25
IOUT = 0.1mA, 8V ≤ VIN ≤ 24V
20
25
IOUT = 1mA, 8V ≤ VIN ≤ 24V
50
100
IOUT = 10mA, 8V ≤ VIN ≤ 24V
0.3
0.5
IOUT = 50mA, 8V ≤ VIN ≤ 24V
2.0
2.5
Line Regulation (Δ VOUT)
6V ≤ VIN ≤ 40V, IOUT = 1mA
10
30
mV
Load Regulation (Δ VOUT)
0.1mA ≤ IOUT ≤ 5mA
10
30
mV
5mA ≤ IOUT ≤ 50mA
10
30
mV
0.05
0.10
V
Parameter
Output Voltage (VOUT)
Quiescent Current (IGND)
Dropout Voltage (Δ VOUT)
Conditions
5.5V ≤ VIN ≤ 26V,
0.1mA ≤ IOUT ≤ 50mA (3)
(1)
IOUT = 0.1mA
IOUT = 50mA
(2)
(1)
Units
V
µA
mA
0.20
0.40
V
Short Circuit Current (ISC)
VOUT = 0V
65
120
250
mA
Ripple Rejection (PSRR)
Vripple = 1Vrms, Fripple = 120Hz
−40
−60
dB
Output Bypass Capacitance
(COUT)
0.3Ω ≤ ESR ≤ 8Ω
0.1mA ≤ IOUT ≤ 50mA
10
22
µF
(1)
(2)
(3)
Tested limits are specified to TI's AOQL (Average Outgoing Quality Level) and 100% tested.
Typicals are at 25°C (unless otherwise specified) and represent the most likely parametric norm.
To ensure constant junction temperature, pulse testing is used.
Electrical Characteristics - LM9036-3.3
VIN = 14V, IOUT = 10 mA, TJ = 25°C, unless otherwise specified. Boldface limits apply over entire operating temperature
range
Min
Typical
Max
3.168
3.30
3.432
3.135
3.30
3.465
IOUT = 0.1mA, 8V ≤ VIN ≤ 24V
20
25
IOUT = 1mA, 8V ≤ VIN ≤ 24V
50
100
IOUT = 10mA, 8V ≤ VIN ≤ 24V
0.3
0.5
IOUT = 50mA, 8V ≤ VIN ≤ 24V
2.0
2.5
Line Regulation (Δ VOUT)
6V ≤ VIN ≤ 40V, IOUT = 1mA
10
30
mV
Load Regulation (Δ VOUT)
0.1mA ≤ IOUT ≤ 5mA
10
30
mV
5mA ≤ IOUT ≤ 50mA
10
30
mV
IOUT = 0.1mA
0.05
0.10
V
IOUT = 50mA
0.20
0.40
V
250
mA
Parameter
Output Voltage (VOUT)
Quiescent Current (IGND)
Dropout Voltage (Δ VOUT)
Conditions
5.5V ≤ VIN ≤ 26V,
0.1mA ≤ IOUT ≤ 50mA (3)
(1)
(2)
(1)
Units
V
µA
mA
Short Circuit Current (ISC)
VOUT = 0V
65
120
Ripple Rejection (PSRR)
Vripple = 1Vrms, Fripple = 120Hz
−40
−60
dB
Output Bypass Capacitance
(COUT)
0.3Ω ≤ ESR ≤ 8Ω
0.1mA ≤ IOUT ≤ 50mA
22
33
µF
(1)
(2)
(3)
Tested limits are specified to TI's AOQL (Average Outgoing Quality Level) and 100% tested.
Typicals are at 25°C (unless otherwise specified) and represent the most likely parametric norm.
To ensure constant junction temperature, pulse testing is used.
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LM9036
3
LM9036
SNVS140E – AUGUST 2003 – REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics
Dropout Voltage
Quiescent Current
Figure 4.
Figure 5.
Quiescent Current
Quiescent Current
Figure 6.
Figure 7.
Peak Output Current
Figure 8.
4
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LM9036
LM9036
www.ti.com
SNVS140E – AUGUST 2003 – REVISED MARCH 2013
APPLICATIONS INFORMATION
Unlike other PNP low dropout regulators, the LM9036 remains fully operational to 40V. Owing to power
dissipation characteristics of the package, full output current cannot be ensured for all combinations of ambient
temperature and input voltage.
The junction to ambient thermal resistance θJA rating has two distinct components: the junction to case thermal
resistance rating θJC; and the case to ambient thermal resistance rating θCA. The relationship is defined as: θJA =
θJC + θCA.
On the PFM package the ground tab is thermally connected to the backside of the die. Adding 1 square inch of 2
oz. copper pad area directly under the ground tab will improve the θJA rating to approximately 50°C/W.
While the LM9036 has an internally set thermal shutdown point of typically 150°C, this is intended as a safety
feature only. Continuous operation near the thermal shutdown temperature should be avoided as it may have a
negative affect on the life of the device.
Using the θJA for a LM9036DT mounted on a circuit board as defined at, see (1), and using the formula for
maximum allowable dissipation given in, see (2), for an ambient temperature (TA) of +85°C, we find that PDMAX =
1.3W. Including the small contribution of the quiescent current IQ to the total power dissipation, the maximum
input voltage (while still delivering 50mA output current) is 29.5V. The LM9036DT will go into thermal shutdown
when attempting to deliver the full output current of 50mA, with an ambient temperature of +85°C, and the input
voltage is greater than 29.5V. Similarly, with an ambient temperature of 25°C the PDMAX = 2.5W, and the
LM9036DT can deliver the full output current of 50mA with an input voltage of up to 40V.
While the LM9036 maintains regulation to 55V, it will not withstand a short circuit above 40V because of safe
operating area limitations in the internal PNP pass device. Above 55V the LM9036 will break down with
catastrophic effects on the regulator and possibly the load as well. Do not use this device in a design where the
input operating voltage may exceed 40V, or where transients are likely to exceed 55V.
(1)
(2)
Typical θJA with 1 square inch of 2oz copper pad area directly under the ground tab.
The maximum power dissipation is a function of TJmax, θJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJmax − TA)/θJA. If this dissipation is exceeded, the die temperature will rise above 150°C and the LM9036 will go
into thermal shutdown.
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LM9036
5
LM9036
SNVS140E – AUGUST 2003 – REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Changes from Revision D (March 2013) to Revision E
•
6
Page
Changed layout of National Data Sheet to TI format ............................................................................................................ 5
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LM9036
PACKAGE OPTION ADDENDUM
www.ti.com
8-Oct-2015
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM9036DT-5.0/NOPB
ACTIVE
TO-252
NDP
3
75
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
-40 to 125
LM9036D
T-5.0
LM9036DTX-5.0/NOPB
ACTIVE
TO-252
NDP
3
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
-40 to 125
LM9036D
T-5.0
LM9036M-3.3/NOPB
ACTIVE
SOIC
D
8
95
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LM903
6M-3
LM9036M-5.0
NRND
SOIC
D
8
95
TBD
Call TI
Call TI
-40 to 125
LM903
6M-5
LM9036M-5.0/NOPB
ACTIVE
SOIC
D
8
95
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LM903
6M-5
LM9036MM-3.3/NOPB
ACTIVE
VSSOP
DGK
8
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
KDB
LM9036MM-5.0/NOPB
ACTIVE
VSSOP
DGK
8
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
KDA
LM9036MX-3.3/NOPB
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LM903
6M-3
LM9036MX-5.0/NOPB
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LM903
6M-5
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
8-Oct-2015
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Sep-2015
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LM9036DTX-5.0/NOPB
TO-252
NDP
3
2500
330.0
16.4
6.9
10.5
2.7
8.0
16.0
Q2
LM9036MM-3.3/NOPB
VSSOP
DGK
8
1000
178.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
LM9036MM-5.0/NOPB
VSSOP
DGK
8
1000
178.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
LM9036MX-3.3/NOPB
SOIC
D
8
2500
330.0
12.4
6.5
5.4
2.0
8.0
12.0
Q1
LM9036MX-5.0/NOPB
SOIC
D
8
2500
330.0
12.4
6.5
5.4
2.0
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Sep-2015
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM9036DTX-5.0/NOPB
TO-252
NDP
3
2500
367.0
367.0
38.0
LM9036MM-3.3/NOPB
VSSOP
DGK
8
1000
210.0
185.0
35.0
LM9036MM-5.0/NOPB
VSSOP
DGK
8
1000
210.0
185.0
35.0
LM9036MX-3.3/NOPB
SOIC
D
8
2500
367.0
367.0
35.0
LM9036MX-5.0/NOPB
SOIC
D
8
2500
367.0
367.0
35.0
Pack Materials-Page 2
MECHANICAL DATA
NDP0003B
TD03B (Rev F)
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
Similar pages