NDK NT2016SB-33.6M-NSA3561B Temperature compensated crystal oscillator (tcxo) with enable/disable(stand-by) function nt2016s series (with high-precision gps supported) Datasheet

Crystal Oscillator
Model Name NT2016SB
Temperature Compensated Crystal Oscillator (TCXO) with Enable/Disable(Stand-by) function
NT2016S Series (with high-precision GPS supported)
■ Main Application
For mobile terminals with high-precision GPS functions
■ Features
● A crystal oscillator with highly stable frequency / temperature characteristics best
suited for GPS.
● Supports low power supply voltage. (Supports DC +1.7 V to +3.3 V.)
● Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm,
0.0022 cm3, and 0.008 g, respectively.
● Low power consumption.
● A surface-mount crystal oscillator. (Reflow soldering is possible.)
● Lead-free. Meets the requirements for re-flow profiling using lead-free solder.
● With Enable / Disable(Stand-by) function.
■ Specifications
Model
Item
Nominal frequency range (MHz)
• Frequency setting conditions
NT2016SB
1. Frequencies are set at normal temperatures (+25±2 °C).
13 to 52
Standard frequency (MHz)
16.368, 16.369, 19.2, 26, 33.6
Supply voltage [VCC] (V)
38.4
52
• If you require a product with a different frequency, power
supply voltage, frequency control range, etc. to the standard
+1.8
Load impedance
specifications, please contact us with your enquiries.
10 kΩ//10 pF
Current consumption
Enable (mA)
Max. 1.5
Disable (μA)
Max. 1.7 Max. 2.0
*1. A DC-cut capacitor is not embedded in this crystal oscillator.
Max. 2
Output voltage
Connect a DC-cut capacitor (1,000 pF) to the line-out
Min. 0.8 V(p-p) (DC Coupling *1)
Frequency/Temperature characteristics
Operating temperature range (°C)
terminal of the oscillator.
Max. ±0.5×10–6
–30 to +85
Storage temperature range (°C)
–40 to +85
Frequency/Voltage coefficient
Max. ±0.1×10–6/+1.8 V±5 %
Frequency/Load coefficient
Max. ±0.1×10–6/(10 kΩ//10 pF) ±10 %
Long-term frequency stability
Max. ±1.0×10–6/year
Enable : 80%VCC to VCC,
Disable : 0V to 20% VCC
Enable/Disable function
■ Dimensions
■ List of Ordering Codes
mm
Terminal land connections
2.0 ± 0.1
#3
1.6 ± 0.1
#4
#1
#1
Enable/Disable
#2
GND
#3
OUTPUT
#4
VCC
#2
0.6 ± 0.1
#4
#3
0.4 ± 0.1
0.6
1.2
0.6
NT2016SB-16.368M-NSA3561A
16.369
NT2016SB-16.369M-NSA3561A
19.2
NT2016SB-19.2M-NSA3561A
26
NT2016SB-26M-NSA3561B
33.6
NT2016SB-33.6M-NSA3561B
38.4
NT2016SB-38.4M-NSA3561C
52
NT2016SB-52M-NSA3561D
Ordering Code
The above frequencies are NDK’s standard frequencies.
Frequencies other than the above are available.
Feel free to contact our sales representatives.
0.8 0.4 0.8
#2
0.4 ± 0.05
1.2 ± 0.05
#1
0.7 ± 0.1
Land pattern (Typical)
Frequency
(MHz)
16.368
- 10 -
13B_1227_NT2016SB_GPS_e
Similar pages