OPLINK HWDMG1513001152 Micro-optic wdm Datasheet

Green High Isolation 1310/1550 nm
Micro-Optic WDM
HWDMG Series
Product Description
Oplink’s High-Isolation Micro-Optic Wavelength Division Multiplexer (HWDM) is
based on thin-film filter technology and metal bonding micro-optic packaging.This
component is used to combine or separate 1310 and 1550nm band signal. The
HWDM device offers a very flat and wide passband, low insertion loss, and much
higher isolation than the MWDM device. This product is ideal for high-power Optical Amplification System and WDM Network applications. All Oplink products
are epoxy-free in the optical path. Oplink HWDM devices are Bellcore GR-1221
qualification tested.
Performance Specificationns
Min
Max
Unit
Type 1315
1260
1360
nm
 Environmental Green Plan
Compliance
Type 1513
1520
1600
nm
 Wide Operating Wavelength Range
Type 1315
1520
1600
nm
 Low Insertion Loss
Type 1513
1260
1360
nm
 High Channel Isolation
0.8
0.8
dB
 Ultra Flat Wide Passband
HWDMG Series
Pass Channel Wavelength Range λ1
Reflection Channel Wavelength
Range λ2
Features
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
45
45
 Highly Stable & Reliable
dB
Passband Ripple
0.30
dB
Directivity
50
dB
Return Loss
50
dB
Polarization Dependent Loss
0.2
dB
Polarization Mode Dispersion
0.05
ps
Maximum Power Handling
500
mW
Operating Temperature
Storage Temperature
Fiber Type
Package Dimensions **
 Epoxy-free Optical Path
0 to +70
°C
-40 to +85
°C
Applications
 Bi-directional WDM Systems
 Uni-directional WDM Systems
 CATV Systems
Corning SMF-28
250 μm Bare Fiber
900 μm Loose Tube
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
mm
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified.
S0016 - R05. 20100603
Green High Isolation 1310/1550 nm
Micro-Optic WDM
HWDMG Series
Mechanical Drawing / Package Dimensions (dimension in mm)
P1: SMF-28 250 µm bare fiber
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
P2: 900 µm loose tube
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
HWDMG
0
Wavelength
1310 nm pass = 1315
1550 nm pass = 1513
0
Fiber Length*
0.5 meter = H
1.0 meter = 1
1.5 meters = 5
2.0 meters = 2
Package & Fiber Jacket
P1 + 250 μm bare fiber = 11
P2 + 900 μm loose tube = 22
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
* The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber
length will be longer.
S0016 - R05. 20100603
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages