COMPONENTS PRODUCT INFORMATION NEW RoHS Compliant Waterproof I/O Connector to Make Direct Connection with SFP FO-BD2 Series CONNECTOR MB-0278-2 May 2015 When connected with SFP transceiver Receptacle Plug When connected with modular jack Waterproof Cap for receptacle <<Outline>> The FO-BD2 Series connector is a waterproof I/O connector that can mate directly with the on-board SFP transceiver and modular jack inside the devices. The FO-BD2 Series connector has a superior environmental resistance performance and is ideal for use in a wide range of outdoor applications such as base stations of mobile phones and communication devices. Features Possible to connect directly to on-board SFP transceivers, modular jacks and others. Highly flexible and compatible connections with various types of SFP transceivers, modular jacks and others. Assembly of Plug Harnesses can be completed on site as plug can be builtin to existing harnesses. Dual lock plug method prevents excessive load on the connections of the inner connector during operation. Possible to replace connector as the panel attachment is compatible with TE manufactured FullAXS. Environmental resistance performance ideal for outdoor applications. JAE PMK Div. Proprietary. Copyright © 2015, Japan Aviation Electronics Industry, Ltd. 1/5 MB-0278-2 General Specifications Items Specifications and Performance Operating Temperature -40 Deg. C to 85 Deg. C Applicable Cable - 7.0mm (Standard Diameter) (FO-BD2-P Plug) - 5.86mm to 7.2 (FO-BD2-P-V2 Plug) - 8.5mm to 10.0 (FO-BD2-P-V4 Plug) Repeated Mating 500 times Cable Clamp Strength 100N min. (when each plug is applicable maximum cable diameter) Dustproof and Waterproof Performance IP67 (When mated) Corrosion Resistance 720 hours of salt spray. Materials and Finishes ■ Receptacle: FO-BD2-R Component Material / Finish Shell Zinc alloy / chromium plating (Note 1) O Ring Synthetic rubber ■ Plug: FO-BD2-P, FO-BD2-P-V2, FO-BD2-P-V4 Component Material / Finish Coupling Nut Zinc alloy / chromium plating (Note 1) Barrel Synthetic resin Ground Nut Synthetic resin Bushing Synthetic rubber O Ring Synthetic rubber ■ Waterproof Cap for Receptacle (without wire rope): FO-BD2-RCAP Component Cap Material / Finish Synthetic resin Note 1: Chromium plating: chromium plating (hexavalent chromium free) over nickel over copper. JAE PMK Div. Proprietary. Copyright © 2015, Japan Aviation Electronics Industry, Ltd. 2/5 MB-0278-2 Materials and Finishes ■ Waterproof Cap for Receptacle (with wire rope): FO-BD2-RCAP/WR Component Material / Finish Cap Synthetic resin Tapping Screw Stainless steel Wire Rope Copper alloy / nickel plating, stainless steel Part Number List Type Receptacle Part Number Drawing No. FO-BD2-R SJ113293 7.0mm FO-BD2-P SJ113292 5.86mm to 7.2 FO-BD2-P-V2 SJ115669 8.5mm to 10.0 FO-BD2-P-V4 SJ115958 Waterproof Cap for Receptacle (without wire rope) FO-BD2-RCAP SJ114663 Waterproof Cap for Receptacle (with wire rope) FO-BD2-RCAP/WR SJ113294 Plug (Applicable cable dia.) Specification No. Handling Instructions JACS-70210 JAHL-70210 Outer Dimensions ■ Receptacle: FO-BD2-R Panel attachment hole dimensions (for reference) Panel attachment compatible with TE manufactured FullAXS. JAE PMK Div. Proprietary. Copyright © 2015, Japan Aviation Electronics Industry, Ltd. 3/5 MB-0278-2 Outer Dimensions ■ Plug: FO-BD2-P, FO-BD2-P-V2, FO-BD2-P-V4 ■ When mated ■Waterproof Cap for Receptacle (without wire rope): FO-BD2-RCAP ■ Waterproof Cap for Receptacle (with wire rope): FO-BD2-RCAP/WR JAE PMK Div. Proprietary. Copyright © 2015, Japan Aviation Electronics Industry, Ltd. 4/5 MB-0278-2 Notice: 1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. 2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment. 3. The products presented in this brochure are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. (1) Applications that require consultation: (i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) We may separately give you our support with a quality assurance program that you specify, when you think of a use such as : Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2882 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2015, Japan Aviation Electronics Industry, Ltd. 5/5