Kemet C1210C82513PAC Surface mount ceramic chip capacitors new extended values in x5r dielectric Datasheet

Product Bulletin
Surface Mount Ceramic Chip Capacitors
New Extended Values in X5R Dielectric
KEMET is pleased to continue the expansion of high capacitance ratings in our X5R
ceramic chip capacitors to include the following values in our base metal electrode devices.
X5R/1210 - 6.8µF – 10.0µF (685 - 106) @ 25 Volts
Outline Drawing
Table 1
Dimensions - Millimeters (Inches)
Metric
EIA Size
Size Code Code
3225
1210
L - Length
3.2 (.126) ± 0.2 (.008)
Max.
T - Thickness
See Table 2
W - Width
2.5 (.098) ± 0.2 (.008)
B - Bandwidth
0.5 (.02) ± .25 (.010)
Separation
N/A
Table 2 - X5R - Capacitance Value Extensions
Capacitance
(µF)
6.8
8.2
10.0
KEMET Part
Number
C1210C685(1)3PAC
C1210C825(1)3PAC
C1210C106(1)3PAC
Voltage
25
25
25
Cap
Tol
K,M
K,M
K,M
Thickness
Qty
T (mm)
7” Reel
1.85 ± .20
2,000
2.10 ± .20
2,000
2.10 ± .20
2,000
(1) To complete KEMET part number, insert the alpha code for the tolerance desired. K = ±10%; M = ±20%
F-3261A 08/04
Qty
13” Reel
8,000
8,000
8,000
Electrical Parameters
As detailed in the KEMET Surface Mount Catalog F3102 for X5R, with following specific
requirements based on room temperature (25°C) parameters:
• Operating Range: -55°C to +85°C, with no-bias capacitance shift limited to ± 15% over that range
• Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000
megohm microfarads or 100 gigohms, whichever is less.
• Capacitance and Dissipation Factor (DF) measured at 1KHz at 1Vrms. DF Limit is 5%.
Soldering Process
The 1210 part is suitable for reflow soldering only. All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as
resistance to leaching.
Marking
These chips are normally supplied unmarked. If required, they can be laser marked as an extra
cost option. More detail on the marking format is included in our Surface Mount Catalog F3102.
In general, the information in the KEMET Surface Mount catalog F3102 applies to these
capacitors. The information in this bulletin supplements that in the catalog.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com
Similar pages