rev.2.0 18.11.15 CW532-010F • • • • • • Green DPSS Laser Module 532 nm, 10 mW Focusable Acryl Lens Automatic Power Control 3 VDC Input Voltage IR Filter Description CW532-010F is a compact size focusable diode pumped solid state (DPSS) Nd:YVO4+KTP laser module with a typical emission wavelength of 532 nm, and an optical output power of 10 mW. It features automatic power control (APC) driving electronics for stable operation, an IR filter to block residue IR radiation, and is designed for 3 VDC supply voltage. CW532-010F comes equipped with a coaxial power connector. A matching power supply is optionally available for quick setup and convenient operation (see page 3 for details). Maximum Ratings (T Parameter CASE = 25°C) Values Max. Min. Unit Operating temperature + 15 + 30 °C Storage temperature - 20 + 80 °C Electro-Optical Characteristics (T Parameter Peak Wavelength CASE = 25°C) Min. Values Typ. Max. 531 532 533 Radiated Power 10 Beam diameter at aperture 1.5 Transverse mode Unit nm mW mm TEM00 Warm up time <3 s Operating Current 200 mA Supply Voltage 2.2 3 3.2 Material body brass Material lens acryl Ø 13 x 37 (55) Dimensions Connector MTTF www.roithner-laser.com VDC mm IEC 60130-10, Type A, 5.5/2.1 mm 3000 h 1 Ø12.0 Ø4.0 Ø13.0 Outline Dimensions 37.0 18.0 all dimensions in mm Electrical Connection (IEC 60130-10, Type A, 5.5/2.1 mm) GND + VDC Precautions Static Electricity: Precautions against electrostatic discharge (ESD) must be taken when handling or operating the module. Surge voltage or electrostatic discharge can result in complete failure of the laser diode. Heat Sinking: In order to maintain lifetime and stability of the laser diode it is essential to provide efficient heat management. For long time stable operation proper contact between laser module and heat sink is mandatory. Safety: This laser module emits highly concentrated visible light which can be hazardous to the human eye and skin. It is classified as CLASS 3B laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Actual laser light emitted and precautions necessary strongly depend on mode of operation. www.roithner-laser.com 2 Accessories Laser Power Supply LPS31 • • • • • • 110-230 VAC universal input voltage Small ripple (<80 mV) AC Europlug (CEE7/16) ON/OFF switch IEC 60130-10 Type A connector Output 3 VDC, max. 1 A © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice www.roithner-laser.com 3