LED-60W Series– Fixed Output and Dimmable Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Aluminum Housing Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <30.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.90 Amps max Maximum Power: 60W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: < _ 20% @ full load Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Protection: utput Over-Voltage, Output Over-Current, and O Output Short Circuit Protection reset by power cycling • Total Power: 60 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • IP66 • High Power Factor • UL8750, CSA 22.2, EN61347, EN61000-3-2, EN61000-3-3 Class C • UL Sign Components Manual (S.A.M. Models) Environmental Specifications Minimum Starting Temp: -30ºC Maximum Case Temp. 90°C Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% Cooling: Convection Vibration Frequency: 5 to 55 Hz/2g, 30 minutes Sound Rating: MTBF: EMC: Constant Current - Product Specifications Model Number Output Current Output Voltage (mA ±3%) Range (Vdc) Max. Output Power (W) Typical Efficiency LED60W-170-C0350-XX 350 56-170 59.5 92% LED60W-134-C0450-XX 450 44-134 60 92% LED60W-086-C0700-XX 700 28-86 60 92% LED60W-058-C1050-XX 1050 19-58 60 91% Class A LED60W-048-C1250-XX 1250 16-48 60 91% 18,000 Hours at full load and 40ºC ambient conditions 4 per MIL-217F Notice 2 LED60W-043-C1400-XX 1400 14-43 60 91% LED60W-036-C1670-XX 1670 12-36 60 91% FCC 47CFR Part 15 Class B compliant LED60W-027-C2300-XX 2300 9-27 60 90% LED60W-024-C2500-XX 2500 8-24 60 90% LED60W-022-C2720-XX 2720 7-22 59.8 89% LED60W-020-C3000-XX 3000 7-20 60 89% LED60W-018-C3330-XX 3330 6-18 59.9 88% LED60W-015-C4000-XX 4000 5-15 60 87% LED60W-012-C5000-XX 5000 4-12 60 87% Ordering Options: -D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers. See page 3 for additional specifications. -PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications. -XX indicates dimming options are available. See options at left. Blank = fixed current output Constant Voltage - Product Specifications Model Number LED60W-012 LED60W-015 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. Typical Efficiency 12 1250-5000 60 87% 15 1000-4000 60 87% LED60W-018 18 833-3300 59.9 88% 20 750-3000 60 89% 22 680-2720 59.8 89% 24 625-2500 60 90% 27 575-2300 60 90% LED60W-024 LED60W-027 E332160 Max. Output Power (W) LED60W-020 LED60W-022 Sign Components Manual • Output Voltage Output Current (Vdc ±5%) Range (mA) • LED60W-036 36 418-1670 60 91% LED60W-043 43 350-1400 60 91% LED60W-048 48 313-1250 60 91% LED60W-058 58 263-1050 60 91% LED60W-086 86 175-700 60 92% LED60W-134 134 113-450 60 92% LED60W-170 170 88-350 59.5 Class 2: 92% • Indicates S.A.M. US/Canada US Only Rev 9-11-15 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED60W Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 4 Dimensions - IN [mm] 6.81 [173.0] 0.31 [7.8] 1.06 [27] 2.81 [71.3] 0.16 [4] 0.24 [6] 6.42 [163.0] 7.25 [184.0] 0.39±0.04 [10±1] 5.91 Min [150 Min] 0.90 [22.8] Dimming Purple (+) Gray (-) INPUT Black (L) White (N) Green (GND) 0.39±0.04 [10±1] 2.24±0.12 [57.0±3] 2.24±0.12 [57.0±3] OUTPUT Red (+) Blue (-) 3.21 [81.5] Tc = 90°C max Power Factor / Load 1.00 THD / Load 50% 0.90 45% 0.80 40% 0.70 35% 0.60 30% THD PF 1.83 [46.5] 5.91 Min [150 Min] WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. Dimming Leads: 22 AWG, rated 300 V, 105C. All wires are stranded with solder dipped ends. 0.50 0.40 25% 120Vac 277Vac 0.30 0.20 15% 0.10 10% 0.00 50% 60% 70% 80% 90% Load 120Vac 277Vac 20% 100% 0% 50% 60% 70% 80% Load 90% 100% Lifetime (kHrs) Lifetime / Case Temperature 350 325 300 275 250 225 200 175 150 125 100 75 50 25 0 45 (Full Load @ 120Vac) 50 55 60 65 70 75 80 85 Case Hotspot Temperature (°C) 90 Note: Life calculations are based on reliability with confidence using a 90% confidence level and <5% failure rate. At a confidence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (Failure is defined as a driver drifting outside specification, rather than fail to operate) UL Conditions of Acceptability See website for additional information Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED60W Series SSL Solutions Faster Than The Speed Of Light® Pg 3 of 4 “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum 0 mA -2.0 V ——- 2 mA +15 V Source Current out of 0-10V Purple Wire Absolute Voltage Range on 0-10V (+) Purple Wire Typical Dimming Circuit Dim (+) Purple LED60W-XX-CXXXX-D IP710 Wall Dimmer Dim (-) Gray (Dimmer must be current-sink type control) Output Current / 0-10VDC Dimming Input Output Current % 100 90 80 70 60 50 40 30 20 10 0 0V 1V 2V 3V 4V 5V 6V Dimming Input (Vdc) 7V 8V 9V 10V Notes: 1. 2. 3. 4. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED60W Series SSL Solutions Faster Than The Speed Of Light® Pg 4 of 4 “-PD” Option: PWM Dimming Parameters Absolute Maximum Voltage Range on PWM Input (Purple Wire) Input LOW Level Voltage Range (Purple Wire) Input HIGH Level Voltage Range (Purple Wire) Sink Current into PWM Input (Purple Wire) PWM Input Signal Frequency PWM Input Signal Positive Duty Cycle Minimum Typical Maximum -2.0V -2.0 +9.0 0mA 200Hz 0% 10V 0V 10V — — 10-90% +28V +7.5V 28V 1.2mA 1000Hz 100% PWM Positive Dimming Typical Circuit PWM (+) Purple LED60W-XX-CXXXX-PD PWM In PWM (-) Gray Output Current / Positive Duty Cycle Output Current % 100 90 80 70 60 50 40 30 20 10 0 0% 10% 20% 30% 40% 50% 60% Positive Duty Cycle 70% 80% 90% 100% Notes: 1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side. 2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle. 3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com