DDK N-SP-3.5DFE-CF N style coaxial connector Datasheet

N Style Coaxial Connector
N Series
FEATURE
Characteristic
Impedance
・ N series is a thread coupling coaxial connector
which is
50 Ω
the most popular as a 7mm type 50 Ω
impedance.
・ N series is available for various cable type.
Frequency
Range
・ It is incompatible to NC series(75 Ω impedance N
DC to 3GHz
Style connector).
Lock Type
Screw
CONFORMING STANDARD
JIS-C5411,MIL-PRF-39012
SPECIFICATIONS
Characteristic Impedance
50 Ω
Rated Volatge
500VAC(r.m.s.)
Dielectric Withstanding Voltage 1,500V AC(r.m.s) / 1 minute
Insulation Resistance
1,000M Ω min. at 500V DC
Contact Resistance
3m Ω max.
V.S.W.R.
1.3 max. (DC 〜 3GHz)
Operating Temperature
-55 〜 +85℃
* The specifications are typical but may not apply to all connectors.
Please check the specifications on each item with its drawing from us when you use.
Also, the performance is diffrenet by using cable.
MATERIAL/FINISH
RoHS
Compliant
Compliant
Item
151222
Material / Finish
Shell
Copper Alloy / Ni or Ag Plating
Contact (Female)
Copper Alloy / Ag or Au Plating
Contact (Male)
Copper Alloy /Ag or Au Plating
Insulator
PTFE
Gasket
Silicon Rubber
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
N
Series
Unit:mm
○ Straight Cable Plug
Clamp Type
Applicable
Part Number
N-P-3
Cable
3C-2V
φA
φ21
N-P-3-CF
3D-2V
3C-2V
N-P-3-Ni-CF
3D-2V
3C-2V
N-P-3-NiCAu-CF
(L)
3D-2V
3C-2W
N-P-3W-CF
N-P-5
3D-2W
3C-2W
φA
φ21
N-P-3W-Ni-CF
N-P-3
(L)
(L)
φ21
φA
φA
φ21
N-P-8-1
3D-2W
3C-2W
N-P-3W-D1-CF
3D-2W
40%
φA (L)
Finish
Assembly
Outer
Center Instruction
Conductor Conductor
80%
~
6.2 44.6
Ag
Ag
1
6.2 44.6
Ni
Ag
1
6.2 44.6
Ni
Au
1
7.2 44.6
Ag
Ag
1
7.2 44.6
Ni
Ag
1
Ni
Au
1
40%
7.2 44.6
80%
~
N-P-55U-CF
RG-55/U
5.4 44.6
Ag
Ag
1
N-P-55U-Ni-CF
RG-55/U
5.4 44.6
Ni
Ag
1
N-P-58U-CF
RG-58/U
5.4 44.6
Ag
Ag
1
N-P-58U-Ni-1-CF
RG-58/U
5.4 44.6
Ni
Ag
1
N-P-58U-NiCAu-CF
RG-58/U
5.4 44.6
Ni
Au
1
(38.0)
φ21
φA
φA
(L)
Applicable
Part Number
φ21
N-P-5
N-P-10
Cable
3.5D-FE
N-SP-3.5DFE-CF
N-P-10
φ21
φA
(38.0)
φ21
φA
44.0
Ag
Ag
1
8.6
44.0
Ni
Ag
1
9.1
45.0
Ag
Ag
1
9.1
45.0
Ni
Ag
1
9.1
45.0
Ni
Au
1
5D-FB
8.1
44.0
Ni
Ag
1
5D-SFA
8.6
41.5
Ni
Au
ー
11.2 44.0
Ag
Ag
1
11.2 44.0
Ni
Ag
1
11.25 38.0
Ag
Ag
2
5C-2W
5C-2W
5D-2W
N-P-5DFB-1-CF
N-SP-5DSFA-CF
5C-2W
5D-2W
RG-8/U
RG-9/U
RG-8/U
N-P-8U-Ni-CF
RG-9/U
RG-8/U
UG-21D/U-CF
RG-9/U
φ21
φA
8.6
5D-2W
N-P-8U-CF
(51.7)
ー
5C-2V
N-P-5W-NiCAu-CF
形状はN-P-5D2V-CR20の場合
Au
5D-2V
N-P-5W-Ni-CF
(L)
Ni
5C-2V
N-P-5W-CF
Assmbly
Outer
Center Instruction
Conductor Conductor
41.5
5D-2V
N-P-5-Ni-CF
φ21
φA
(51.7)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content
with the latest delivery specifications when you use the product.
(L)
http://www.ddknet.co.jp
形状はN-P-5D2V-CR20の場合
2
Finish
6.2
3.5D-QEFA
N-P-5-CF
N-P-8-1
φA (L)
N-P-3
N
N-P-5
Series
○ Straight Plug
Unit:mm
φ21
(L)
φA
φ21
φA
(L)
Clamp Type
N-P-5
φ21
φA
Part Number
φ21
(L)
φA
N-P-8-1
(L)
N-P-8-1
φA
(38.0)
N-P-10
8D-2V
N-P-8-1-Ni-CF
8D-2V
12.6
Ni
Ag
4
N-P-8DFB-1-CF
8D-FB
11.8
Ni
Ag
4
φ21
N-P-10-CF
N-P-Ni-CF
φ21
φA
(51.7)
φA
12.6
Finish
Assembly
Outer
Center Instruction
Conductor Conductor
N-P-8-1-CF
Part Number
(51.7)
Cable
φA
Ag
Ag
4
φ21
φA
N-P-10
φ21
(38.0)
Applicable
N-P-10DFB-1-CF
Applicable
Cable
10C-2V
10D-2V
10C-2V
10D2V
10D-FB
φA
Finish
Assembly
Outer
Center Instruction
Conductor Conductor
14.2
Ag
Ag
4
14.2
Ni
Ag
4
14.2
Ni
Ag
4
形状はN-P-5D2V-CR20の場合
φ21
φA
(L)
(L)
形状はN-P-5D2V-CR20の場合
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
3
N
Series
Unit:mm
○ Right Angle Cable Plug
Clamp Type
ジャック
N-LP-58U
N-J-3
φ21
Applicable
Part Number
Cable
N-LP-58U-CF
N-LP-58U
φA
φ21
φA φA
φA
(L2)
φ17.5
Ni
Ag
ー
(L)
Cable
N-J-5
5D-2V
(L2)
N-LP-5-Ni-CF
5D-2V
8.6
(L)
53.0 36.6
Center
Conductor Conductor
53.0 36.6
Ag
ー
Ni
Ag
ー
φA
φB
φA
(L)
φB
φA
(34.9)
(L2)
N-J-10
φB
φA
(52.7)
φB
φA
(34.9)
(L)
Part Number
N-LP-8U-CF
N-LP-8U-Ni-CF
φB
φA
(34.9)
(47.0)
Applicable
Finish
Assembly
Center
Instruction
Cable
Conductor Conductor
(52.7)
RG-8U
Ag
Ag
ー
RG-9/U
N-J-10
RG-8U
RG-9/U
Outer
Ni
Ag
(52.7)
(47.0)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
4
Assembly
Instruction
Ag
N-J-10
φ21
φ11.2
(L)
8.6
Finish
N-J-8 (L)
(L1)φ21
φ11.2
(46)
φA
(L1)(L2) Outer
N-J-8
φ21
φA
Applicable
φB
φA
N-LP-5-CF
φA
N-J-8
Part Number
φ21
φ11.2
φ17.5
ー
φA
φA
(L2)
(L2)
φA
φA
φ17.5
φ21
N-LP-8U
φ17.5
Ag
(46)
(47.0)
φ17.5
52.9 36.6
Ag
N-J-3
N-J-5
(L1)
(L1)
N-LP-8U
5.4
Conductor Conductor
Assembly
Instruction
N-J-5
φ21
φ21
(L1)
52.9 36.6
Center
ジャック
(L1)
N-LP-8U
5.4
Finish
(46)
(L1)
N-LP-58U
ジャック
N-LP-58U-Ni-CFN-J-3
RG-58/U
(L2)
φA
φ17.5
RG-58/U
φA (L1)(L2)Outer
ー
N
Series
Unit:mm
○ Straight ジャック
Cable Jack
N-J-3
Clamp Type
Part Number
Applicable
Cable
φA
ジャック
N-J-3
N-J-5
(46)
ジャック
φA
φA
N-J-3
3C-2V
N-J-3-CF
3D-2V
3C-2V
N-J-3-Ni-CF
3D-2V
Finish
φA Outer
Assembly
Instruction
Center
Conductor Conductor
6.2
Ag
Ag
2
6.2
Ni
Ag
2
N-J-58U-CF
RG-58/U
5.4
Ag
Ag
2
N-J-58U-Ni-CF
RG-58/U
5.4
Ni
Ag
2
ジャック
(L)
(46)
N-J-3
φA
φA φB φA
φA
N-J-5
N-J-8
Part Number
(46)
(L)
N-J-8
N-J-10
N-J-5
φB
φA
(L)
(46)
N-J-8
N-J-5-Ni-CF
N-J-8U-CF
N-J-8U-Ni-CF
(L)
(52.7)
N-J-8
Part Number
N-J-8-1-CF
φB
φA
φB
φA
(L)
N-J-8-1-Ni-CF
UG-23D/U-CF
N-J-10
φA
5D-2V
8.6
47.0
5D-2V
8.6
RG-8/U
RG-9/U
RG-8/U
RG-9/U
Finish
(L) Outer
Center
Conductor Conductor
Assembly
Instruction
Ag
Ag
2
47.0
Ni
Ag
2
11.2
47.0
Ag
Ag
2
11.2
47.0
Ni
Ag
2
(L)
φB
φA
N-J-10
Cable
N-J-5-CF
(L)
φB
φA
φA
φA
N-J-5
Applicable
Applicable
φA
φB
8D-2V
12.7
19.1
41.2
8D-2V
12.7
19.1
11.2
19.0
Cable
RG-8/U
RG-9/U
Finish
(L) Outer
Center
Conductor Conductor
Assembly
Instruction
Ag
Ag
5
41.2
Ni
Ag
5
40.0
Ag
Ag
5
(L)
(52.7)
φB
φA
N-J-10
Part Number
φB
φA
(52.7)
(52.7)
N-J-10-CF
N-J-10-Ni-CF
N-J-10DFB-1-CF
Applicable
Cable
10C-2V
10D-2V
10C-2V
10D-2V
10D-FB
φA
φB Outer
Finish
Center
Conductor Conductor
14.2
22.2
Ag
Ag
5
14.2
22.2
Ni
Ag
5
14.2
22.2
Ni
Ag
5
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
5
Assembly
Instruction
N
Series
Unit:mm
○ Straight Panel Cable Jack
N-PJ-3取付参考寸法
+0.1
C
φ17.5
φA
Part Number
C
(46)
4-φ3.2
18.2
Ag
Ag
3
5.4
16.6
18.2
Ni
Ag
3
N-PJ-58U-CF
RG-58/U
5.4
16.6
18.2
Ag
Ag
3
0
N-PJ-58U-Ni-CF 4-φ3.2
RG-58/U
5.4
16.6
18.2
Ni
Ag
3
+0.1
φ17.8 02
C
+0.1
18.24±0.05
4-φ3.2 0
18.2
□25.4
+0.1
4-φ3.2 0
4-φ3.2 0
+0.1
0
φ15.0
Part
Number
5D-2V
C
D
8.6
17.5
16.7
18.24
Ag
Ag
3
8.6
17.5
16.7
18.24
Ni
Ag
3
+0.1
+0.1
φ15.0 0
2
18.2
Panel Mounting
Dimensions
18.7
18.2±0.05
□25.4
L
+0.1
4-φ3.2 0
4-φA◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
18.2
http://www.ddknet.co.jp
+0.1
φ15.0 0
6
Assembly
Outer
Center Instruction
Conductor Conductor
B
4-φ3.2 0
18.2
18.24±0.05
Finish
φA
18.24±0.05
18.24±0.05
+0.1 18.2±0.05
φ18.0 0
φ14.6
D
□25.4
D
□25.4
Cable
±0.05
18.25D-2V
N-PJ-5-Ni-CF
D
□25.4
Applicable
5C-2V
+0.1
N-PJ-5-CF
φ18.0 0
4-φA
18.2
18.24±0.05
+0.1
4-φ3.2 0
+0.1
18.2
18.7
+0.1
φ15.0 0
+0.1
+0.1
18.2±0.05
C
18.2
-R取付け
16.6
RG-55/U
4-φA
4-φ3.2
C
2.0
18.24±0.05
18.2±0.05
+0.1
0
(47) 4-φ3.2
4-φA
5.4
N-PJ-55U-Ni-CF
18.2±0.05
D
+0.1
4-φ3.2 0
L
□25.4
3
C
18.2±0.05
D
C φ14.6
φB
φA
C
Ag
□25.4
φA
D
□25.4
3
18.24±0.05 18.2±0.05
4-φ3.2 0
4-φ3.2
N-PJ-5取付け
Ag
18.2±0.05
D
+0.1
B
Ag
Ni
φ17.8 0
+0.1
18.2
18.2
D
Panel (47)
Mounting Dimensions
□25.4
φ18.0 0
16.7
16.7
+0.1
φ18.0 0
4-φ3.2
2.0
B
18.2±0.05
R取付け4-φ3.2
6.2
6.2
18.24±0.05
φ17.5
φA
□25.4
φB
φA
C
Assembly
Outer
Center Instruction
Conductor Conductor
C
4-φ3.2
C
+0.1
φ17.8 0
3C-2V
Finish
B
3D-2V
18.2±0.05
N-PJ-55U-CF
RG-55/U
18.2±0.05
C
2.0
18.2±0.05
N-PJ-5取付け
N-PJ-3取付参考寸法
φA
18.2±0.05
φA
+0.1
4-φ3.2 0
4-φ3.2
3D-2V
N-PJ-3-Ni-CF
□25.4
Cable
3C-2V
+0.1
N-PJ-3-CF
φ17.8 0
(46)
Applicable
18.2±0.05
4-φ3.2
B
2.0
4-φ3.2 0
φ18.0 0
C
(46)
□25.4
(47)
N
18.24
+0.1
D1
φB
φA
φ17.8 0
18.2±0.05
D
□25.4
Series
18.24±0.05
Unit:mm
○ Receptacle Jack
+0.1
N-R取付け
4-φ3.2
+0.1
4-φA
φ14.6
D
+0.1
φ18.0 0
(47)
D
□25.4
4-φ3.2 0
Part Number
N-R-CF
+0.1
φ15.0 0
N-R-Ni-CF
18.24±0.05
2
18.2
18.7
□25.4
L
L
18.2±0.05
C
18.24±0.05
18.2
2.0
4-φ3.2 0
Finish
Outer
Center
Conductor Conductor
29
Ag
Ag
φ 3.2
29
Ni
Ag
φ 3.2
N-R-NiCAu-CF
29
Ni
Au
φ 3.2
UG-58A/U-CF
18.2±0.05
29
Ag
Ag
φ 3.2
+0.1
4-φ3.2 0
18.2
□25.4
18.2±0.05
Panel Mounting Dimensions
○ Dust Cap
5/8-24UNEF-2B
(φ3.5)
Part Number
(φ19.5)
L
+0.1
φ15.0 0
(60)
Finish
N-RC-5
Ni
N-RC-5-D1
Ag
(71)
5/8-24UNEF-2B
Part Number
N-RC-3-CF
Finish
Ni
(φ19.3)
2
18.7
18.2±0.05
18.2
4-φA
11.1
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
7
φA
N
Series
Unit:mm
○ Assembly Instruction(1) Straight Cable Plug
Parts Configulration
Contact
Nut
Nut
Washer
Washer
Gasket
Washer
Clamp Contact
Gasket
Washer
Clamp
①
Insulator
Body
Insulator
Body
① L=The Cable length require for the single-ended
cable assembly.
L=L1-10
L1
Sheath
②
L1
Sheath
Nut
Nut
Washer
Washer
Outer
Conductor
Cut the sheath 15mm from the end of the cable
and insert the clamp.
Please be careful to not damage the outer
15mm
Gasket
Clamp
Clamp
Insulator
Canter Conductor
(Pre-soldering)
Insulator
Pick the outer conductor and turn
down to the clamp equally.
Canter Conductor
(Pre-soldering)
3.5~4.0mm
3.5~4.0mm
④
conductor.
15mm
Gasket
Pick the outer conductor and turn
down to the clamp equally.
③
② Insert the nut, washer and gasket into the cable.
Outer
Conductor
5.0mm
3.5mm
3.5mm
③ Pick the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
④ Solder up the contact with the center conductor.
5.0mm
Soldering
Contact
Soldering
No gap
Contact
No gap
Please be careful to not deform the
insulator by heat.
When the solder is stick out, please shave
the extra solder.
No gap between contact and insulator of
the cable.
⑤ Insert the ring and insulator as fig. 5.
● In case of the insulator which has directivity,
⑤
insert the insulator as below direction and fit
the thinner side of the insulator into the inside
Washer
diameter of the washer.
Insulator
Washer
Insulator
Washer
Insulator
⑥
Washer
assembly into the body and screw
⑥ Insert the above
Insulator
up by wrench.
Applicable Cable
3C-2V, 3D-2V, 3C-2W,3D-2W,
RG-55/U, RG-58/U
5C-2V, 5D-2V
5C-2W, 5D-2W
5D-FB
RG-8/U, RG-9/U
Recommended Tightening Torque
196 〜 392N・cm(20 〜 40kgf・cm)
392N・cm(40kgf・cm)
490 〜 686N・cm(50 〜 70kgf・cm)
441 〜 539N・cm(45 〜 55kgf・cm)
343 〜 392N・cm(35 〜 40kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
8
N
Series
Unit:mm
○ Assembly Instruction(2) Straight Cable Jack
Washer
Clamp
Washer
Parts Configulration
Contact
Gasket
Nut
①
Body
Insulator
Contact
Gasket
Nut
Washer
Clamp
Washer
Body
Insulator
① L=The Cable length require for the single-ended
cable assembly.
L1
L=L1-12
L1
Gasket
Nut
Outer
Conductor
Nut
②
Cable
Gasket
Washer
Cable
② Insert the nut, washer and gasket into the cable.
Outer
Conductor
Cut the sheath 15mm from the end of the cable
and insert the calmp.
Please be careful to not damage the outer conductor .
15mm
15mm
Washer
Center
Conductor
Insulator
③ Pick the outer conductor and turn down to the
(Pre-soldering)
③
Insulator
Center Conductor
(Pre-soldering)
Clamp
3.5~4mm
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
3.5mm
Clamp
3.5~4mm
5mm
3.5mm
④
clamp. Cut the outer conductor along the clamp.
④ Solder up the contact with the center conductor.
5mm
Contact
Soldering
Soldering
Contact
No gap
Washer
No gap
⑤
Please be careful to not deform the
insulator by heat.
When the solder is stick out, please shave the
extra solder.
No gap between contact and insulator of
the cable.
⑤ Insert the ring and insulator as fig. 5.
Washer
● In case of the insulator which has directivity,
insert the insulator as below direction and fit
the thinner side of the insulator into the inside
diameter of the washer.
Insulator
Insulator
Washer
Insulator
⑥
into the body and screw
Washer
⑥ Insert the above assembly
up by wrench.
Applicable Cable
3C-2V, 3D-2V, RG-58/U,
5D-2V
RG-8/U,RG-9/U
Insulator
Recommended Tightening Torque
196 〜 392N・cm(20 〜 40kgf・cm)
490 〜 686N・cm(50 〜 70kgf・cm)
343 〜 392N・cm(35 〜 40kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
9
N
Series
Unit:mm
○ Assmbly Instruction(3)Straight Panel Jack
Parts Configulration
Washer
Clamp
Washer
Body
Washer
Clamp
Washer
Body
Nut
Gasket
Contact
Insulator
Nut
Gasket
Contact
Insulator
①
L2
Nut
L2
Nut
②
① L=The Cable length require for the single-ended
L1
cable assembly.
Gasket
L1
Outer
Conductor
Gasket
Outer
Conductor
L=L1-6.7
L=-L2-1.2
② Insert the nut, washer and gasket into the cable.
Cut the sheath 15mm from the end of the cable
15mm
and insert the clamp.
Cable
Washer
Cable
15mm
Insulator
Center Conductor
Washer
(Pre-soldering)
③
Please be careful to not damage the outer
Insulator Center Conductor
(Pre-soldering)
Clamp
3.5~4mm
Clamp
3.5~4mm
Soldering
3.5mm
Contact
5mm
Soldering
Contact
conductor.
④ Solder up the contact with the center conductor.
Please be careful to not deform the insulator
by heat.
When the solder is stick out, please shave the extra
solder.
No gap between contact and insulator of the cable.
Washer
Washer
⑤
clamp. Cut the outer conductor along the clamp.
Please be careful to not damage the center
No gap
No gap
③ Pick the outer conductor and turn down to the
Cut the insulator and center conductor as fig.3.
5mm
3.5mm
④
conductor.
⑤ Insert the ring and insulator as fig. 5.
● In case of the insulator which has directivity,
insert the insulator as below direction and fit
Insulator
the thinner side of the insulator into the inside
Washer
diameter ofInsulator
the washer.
Insulator
Washer
Insulator
⑥
⑥ Insert the above assembly into the body and screw
up by wrench.
Recommended Tightening Torque
:196 〜 392N・cm(20 〜 40kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
10
N
Series
Unit:mm
○ Assembly Instruction(4)MIL Clamp Straigh Cable Plug
Parts Configulration
Nut
Nut
Gasket
※Washer
Gasket
※Washer
Clamp
Body
Clamp
Contact
Body
Contact
※ As for N-P-8-1-CF, N-P-8-1-Ni-CF, UG-21D/U-CF and N-P-8DFB-1-CF
washer is not attached. The washer is not inserted into the cable.
① The cable length require for the single-ended
cable assembly as following table.
①
Part Number
L1
Sheath
Sheath
L1
Outer
Conductor
Washer
N-P-8-1-Ni-CF
N-P-10-Ni-CF
L1ー21.5
N-P-8DFB-1-CF
L1-14.2
N-P-10DFB-1-CF
L2
Nut
Nut
③
10
N-P-10-CF
②
Gasket
L2
13
② Insert the nut, washer and gasket into the cable.
Clamp
Cut the sheath from the end of the cable
and insert the clamp.
Clamp
Gasket
L2(mm)
L1ー11.4
UG-21D/U-CF
Outer
Conductor
Washer
L(mm)
N-P-8-1-CF
Please be careful to not damage the outer conductor.
Tip the outer conductor and
turn down to the clamp equally. Insulator
③ Pick the outer conductor and turn down to the
Tip the outer conductor and
turn down to the clamp equally. Insulator
clamp. Cut the outer conductor along the clamp.
Center Conductor
(Pre-soldering)
Center Conductor
(Pre-soldering)
B
B
④
A
A
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
C
Part Number
C
N-P-8-1-CF
N-P-8-1-Ni-CF
UG-21D/U-CF
Soldering
N-P-10-CF
Soldering
Contact
No gap
B(mm)
1.0
3.5 〜 4.0
C(mm)
5
N-P-10-Ni-CF
1.8
4.0 〜 4.5
N-P-8DFB-1-CF
1.8
3.5 〜 4.0
N-P-10DFB-1-CF
Contact
A(mm)
4.5
④ Solder up the contact with the center conductor.
No gap
Please be careful to not deform the insulator
by heat.
When the solder is stick out, please shave
the extra solder.
No gap between contact and insulator of
the cable.
⑤
⑤ Insert the above assembly into the body and screw
up by wrench.
Applicable Cable
RG-8/U, RG-9/U
8D-2V
8D-FB
10C-2V, 10D-2V
10D-FB
Recommended Tightening Torque
196 〜 392N・cm(20 〜 40kgf・cm)
294 〜 392N・cm(30 〜 40kgf・cm)
294N・cm(30kgf・cm)
980N・cm(100kgf・cm)
294N・cm(30kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
11
N
Series
Unit:mm
○ Assembly Instruction(5)MIL Clamp Straight Cable Jack
Parts Configulration
※Washer
Nut
※Washer
Nut
Calmp
Gasket
Body
※ As for N-J-8-1-CF, N-J-8-1-Ni-CF and UG-23D/U-CF,
Body
the washer is not attached. The washer is not inserted into the cable.
Calmp
Gasket
Contact
Contact
① The cable length require for the single-ended
①
cable assembly as following table.
L1
Part Number
L1
Sheath
②
Washer
Sheath
Washer
③
N-J-8-1-Ni-CF
Outer conductor
Insert the nut, washer and gasket into the cable.
②
Clamp
Cut the sheath 10mm from the end of the cable
Please be careful to not damage the outer
Insulator conductor.
Insulator
③
(Pre-soldering)
Pick
Outer Conductor
5mm
B
the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
Cut the insulator and center conductor as fig.3.
(Pre-soldering)
Please be careful to not damage the center
A
conductor.
5mm
Part Number
A
Soldering N-J-8-1-CF
N-J-8-1-Ni-CF
UG-23D/U-CF
Soldering
Contact
N-J-10-CF
N-J-10-Ni-CF
No gap
N-J-10DFB-1-CF
Contact
No gap
L1ー23.4
Outer Conductor
Pick the outer conductor and
turn down to the clamp equally/
④
N-J-10-Ni-CF
and insert the clamp.
10mm
Clamp
Gasket
Pick the outer conductor and
turn down to the clamp equally/
B
L1ー13.2
L1ー13.8
N-J-10DFB-1-CF
10mm
Gasket
L(mm)
UG-23D/U-CF
N-J-10-CF
Outer conductor
Nut
Nut
N-J-8-1-CF
A(mm)
B(mm)
1.0
3.5 〜 4.0
1.8
4.0 〜 4.5
④ Solder up the contact with the center conductor.
Please be careful to not deform the insulator
by heat.
When the solder is stick out, please shave
the extra solder.
No gap between contact and insulator of
the cable.
⑤
⑤ Insert the above assembly into the body and screw
up by wrench.
Applicable Cable
8D-2V, RG-8/U, RG-9/U
10C-2V, 10D-2V
10D-FB
Recommended Tightening Torque
294 〜 392N・cm(30 〜 40kgf・cm)
980N・cm(100kgf・cm)
294N・cm(30kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
12
Similar pages