BGP4001W-ST THRU BGP4007W-ST 1A Surface Mount General Purpose Rectifiers ■ Features ■ Outline • Low profile surface mounted application in order to optimize board space. • High current capability. • High surge capability. • Glass passivated chip junction inside. • Suffix "G" indicates Halogen-free part, ex.BGP4001WG-ST. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 SOD-123ST 0.154(3.9) 0.138(3.5) 0.039(1.0) 0.031(0.8) 0.016(0.4) Typ. 0.079(2.0) 0.063(1.6) 0.008(0.20)Max. 0.055(1.4) 0.039(1.0) 0.039 (1.0) 0.096(2.45) 0.081(2.05) 0.024 (0.6) ■ Mechanical data 0.051(1.3) 0.035(0.9) • Epoxy:UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123ST • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity : Indicated by cathode band • Weight : Approximated 0.0155 gram 0.039(1.0) 0.031(0.8) 0.057(1.45) 0.041(1.05) Dimensions in inches and (millimeters) ■ Maximum ratings and electrical characteristics Rating at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Conditions Symbol Forward rectified current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Forward surge current V R = V RRM T A = 25 OC Reverse current V R = V RRM T A = 125 C MAX. UNIT IO 1.0 A I FSM 30 A Junction to ambient Diode junction capacitance f=1MHz and applied 4V DC reverse voltage Max. RMS voltage V RMS (V) Max. DC blocking voltage V R (V) BGP4001W-ST A1 50 35 50 BGP4002W-ST A2 100 70 100 BGP4003W-ST A3 200 140 200 BGP4004W-ST A4 400 280 400 BGP4005W-ST A5 600 420 600 BGP4006W-ST A6 800 560 800 BGP4007W-ST A7 1000 700 1000 1 uA 100 O 60 CJ T STG Storage temperature Max. repetitive peak reverse voltage V RRM (V) 5.0 R θJA Thermal resistance Marking code TYP. IR O Symbol MIN. 15 -55 C/W pF +150 O C Max. forward voltage @1.0A, T A = 25 OC V F (V) Operating temperature T J ( OC) 1.10 -55 ~ +150 Document ID : DS-12G18 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C BGP4001W-ST THRU BGP4007W-ST 1A Surface Mount General Purpose Rectifiers ■ Rating and characteristic curves FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 3.0 1.0 1.2 1.0 0.8 Single Phase 0.6 Half Wave 60Hz Resistive Or Inductive Load 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 200 O TJ=25 C O AMBIENT TEMPERATURE ( C) Pulse Width 300us 1% Duty Cycle 0.1 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 FORWARD VOLTAGE,(V) FIG.3 - TYPICAL REVERSE CHARACTERISTICS PEAK FORWAARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 50 50 40 30 8.3ms Single Half TJ=25OC Sine Wave 20 JEDEC method 10 0 1 100 5 50 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE 35 TJ=100OC JUNCTION CAPACITANCE,(pF) REVERSE LEAKAGE CURRENT, (uA) 10 1.0 TJ=25OC .1 30 25 20 15 10 5 0 .01 0 20 40 60 80 100 120 .01 .05 .1 .5 1 5 10 50 100 140 REVERSE VOLTAGE,(V) PERCENTAGE RATED PEAK REVERSE VOLTAGE 2 Document ID : DS-12G18 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C BGP4001W-ST THRU BGP4007W-ST 1A Surface Mount General Purpose Rectifiers ■ SOD-123ST foot print C A B D A B C D 0.036 (0.90) 0.084 (2.10) 0.032 (0.80) 0.032 (0.80) Dimensions in inches and (millimeters) ■ CITC reserves the right to make changes to this document and its products and specifications at any time without notice. ■ Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. ■ CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design. ■ CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. ■ No license is granted by implication or otherwise under any intellectual property rights of CITC. ■ CITC products are not authorized for use as critical components in life support devices or systems without express written approval of CITC. http://www.citcorp.com.tw/ Tel:886-3-5600628 Fax:886-3-5600636 Add:Rm. 3, 2F., No.32, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) 3 Document ID : DS-12G18 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C