TIBPAL20L8-15C, TIBPAL20R4-15C, TIBPAL20R6-15C, TIBPAL20R8-15C TIBPAL20L8-20M, TIBPAL20R4-20M, TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 • High-Performance: fmax (w/o feedback) TIBPAL20R’ -15C Series . . . 45 MHz TIBPAL20R’ -20M Series . . . 41.6 MHz • • • High-Performance . . . 45 MHz Min • I I I I I I I I I I I GND Reduced ICC of 180 mA Max Functionally Equivalent, but Faster Than PAL20L8, PAL20R4, PAL20R6, PAL20R8 Power-Up Clear on Registered Devices (All Register Outputs are Set Low, but Voltage Levels at the Output Pins Go High) Preload Capability on Output Registers Simplifies Testing Package Options Include Both Plastic and Ceramic Chip Carriers in Addition to Plastic and Ceramic DIPs DEVICE I INPUTS 3-STATE O OUTPUTS REGISTERED Q OUTPUTS I/O PORT S PAL20L8 14 2 0 6 PAL20R4 12 0 4 (3-state buffers) 4 PAL20R6 12 0 6 (3-state buffers) 2 PAL20R8 12 0 8 (3-state buffers) 0 description These programmable array logic devices feature high speed and functional equivalency when compared with currently available devices. These IMPACT™ circuits combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-performance substitutes for conventional TTL logic. Their easy programmability allows for quick design of custom functions and typically results in a more compact circuit board. In addition, chip carriers are available for futher reduction in board space. 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 VCC I O I/O I/O I/O I/O I/O I/O O I I TIBPAL20L8’ C SUFFIX . . . FN PACKAGE M SUFFIX . . . FK PACKAGE (TOP VIEW) I I I NC VCC I O • (TOP VIEW) I I I NC I I I 5 4 3 2 1 28 27 26 25 6 24 7 23 8 22 9 21 10 20 11 19 12 13 14 15 16 17 18 I/O I/O I/O NC I/O I/O I/O I I GND NC I I O • TIBPAL20L8’ C SUFFIX . . . JT OR NT PACKAGE M SUFFIX . . . JT OR W PACKAGE NC − No internal connection Pin assignments in operating mode Extra circuitry has been provided to allow loading of each register asynchronously to either a high or low state. This feature simplifies testing because the registers can be set to an initial state prior to executing the test sequence. The TIBPAL20’ C series is characterized from 0°C to 75°C. The TIBPAL20’ M series is characterized for operation over the full military temperature range of −55°C to 125°C. IMPACT is a trademark of Texas Instruments Incorporated. PAL is a registered trademark of Advanced Micro Devices Inc. Copyright © 2010, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TIBPAL20R4-15C, TIBPAL20R6-15C, TIBPAL20R8-15C TIBPAL20R4-20M, TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 (TOP VIEW) (TOP VIEW) 24 23 22 21 20 19 18 17 16 15 14 13 VCC I I/O I/O Q Q Q Q I/O I/O I OE I I I NC I I I 4 3 2 1 28 27 26 5 25 6 24 7 23 8 22 9 21 10 20 11 19 12 13 14 15 16 17 18 (TOP VIEW) (TOP VIEW) VCC I I/O Q Q Q Q Q Q I/O I OE I I I NC I I I 4 3 2 1 28 27 26 5 25 6 24 7 23 8 22 9 21 10 20 11 19 12 13 14 15 16 17 18 (TOP VIEW) (TOP VIEW) VCC I Q Q Q Q Q Q Q Q I OE I I I NC I I I 4 3 2 1 28 27 26 5 25 6 24 7 23 8 22 9 21 10 20 11 19 12 13 14 15 16 17 18 NC Pin assignments in operating mode 2 POST OFFICE BOX 655303 OE I Q 24 23 22 21 20 19 18 17 16 15 14 13 I I GND NC 1 2 3 4 5 6 7 8 9 10 11 12 VCC I Q TIBPAL20R8’ C SUFFIX . . . FN PACKAGE M SUFFIX . . . FK PACKAGE I I CLK NC TIBPAL20R8’ C SUFFIX . . . JT OR NT PACKAGE M SUFFIX . . . JT OR W PACKAGE CLK I I I I I I I I I I GND − No internal connection • DALLAS, TEXAS 75265 Q Q Q NC Q Q Q OE I I/O 24 23 22 21 20 19 18 17 16 15 14 13 I I GND NC 1 2 3 4 5 6 7 8 9 10 11 12 VCC I I/O TIBPAL20R6’ C SUFFIX . . . FN PACKAGE M SUFFIX . . . FK PACKAGE I I CLK NC TIBPAL20R6’ C SUFFIX . . . JT OR NT PACKAGE M SUFFIX . . . JT OR W PACKAGE CLK I I I I I I I I I I GND I/O Q Q NC Q Q I/O OE I I/O 1 2 3 4 5 6 7 8 9 10 11 12 I I GND NC CLK I I I I I I I I I I GND VCC I I/O TIBPAL20R4’ C SUFFIX . . . FN PACKAGE M SUFFIX . . . FK PACKAGE I I CLK NC TIBPAL20R4’ C SUFFIX . . . JT OR NT PACKAGE M SUFFIX . . . JT OR W PACKAGE Q Q Q NC Q Q Q TIBPAL20L8-15C, TIBPAL20R4-15C TIBPAL20L8-20M, TIBPAL20R4-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 functional block diagrams (positive logic) TIBPAL20L8’ & 40 X 64 I 20 x 14 6 20 20 EN ≥ 1 7 O 7 O 7 I/O 7 I/O 7 I/O 7 I/O 7 I/O 7 I/O 6 TIBPAL20R4’ OE CLK EN 2 C1 & 40 X 64 I 20 x 12 I=0 2 ≥1 8 Q 1D 8 Q 8 Q 8 Q 20 4 4 20 EN ≥ 1 7 I/O 7 I/O 7 I/O 7 I/O 4 4 denotes fused inputs POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 TIBPAL20R6-15C, TIBPAL20R8-15C TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 functional block diagrams (positive logic) TIBPAL20R6’ OE CLK EN 2 C1 & 40 X 64 I 20 x 12 ≥1 8 I=0 2 1D Q 8 Q 8 Q 8 Q 8 Q 8 Q 20 6 2 20 EN ≥ 1 7 I/O I/O 7 2 6 TIBPAL20R8’ OE CLK EN 2 C1 & 40 X 64 I 20 x 12 8 8 ≥1 I=0 2 8 Q 8 Q 8 Q 8 Q 8 Q 8 Q 8 Q 20 20 8 denotes fused inputs 4 Q 1D POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TIBPAL20L8-15C TIBPAL20L8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 logic diagram (positive logic) I I 1 Increment 0 2 4 8 12 16 20 24 28 32 36 39 23 First Fuse Numbers I I I I I I I I I 3 4 5 6 7 8 9 10 0 40 80 120 160 200 240 280 22 320 360 400 440 480 520 560 600 21 640 680 720 760 800 840 880 920 20 960 1000 1040 1080 1120 1160 1200 1240 19 1280 1320 1360 1400 1440 1480 1520 1560 18 1600 1640 1680 1720 1760 1800 1840 1880 17 1920 1960 2000 2040 2080 2120 2160 2200 16 2240 2280 2320 2360 2400 2440 2480 2520 15 14 11 13 I O I/O I/O I/O I/O I/O I/O O I I Fuse number = First fuse number + Increment Pin numbers shown are for JT, NT, and W packages. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 TIBPAL20R4-15C TIBPAL20R4-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 logic diagram (positive logic) CLK I 1 Increment 0 2 4 8 12 16 20 24 28 32 36 39 23 First Fuse Numbers I I I I I I I I I 3 4 5 6 7 8 9 10 0 40 80 120 160 200 240 280 22 320 360 400 440 480 520 560 600 21 640 680 720 760 800 840 880 920 I=0 1D 960 1000 1040 1080 1120 1160 1200 1240 I=0 1D 1280 1320 1360 1400 1440 1480 1520 1560 I=0 1D 1600 1640 1680 1720 1760 1800 1840 1880 I=0 1D I/O I/O Q C1 19 Q C1 18 Q C1 17 Q C1 1920 1960 2000 2040 2080 2120 2160 2200 16 2240 2280 2320 2360 2400 2440 2480 2520 15 11 14 13 Fuse number = First fuse number + Increment Pin numbers shown are for JT, NT, and W packages. 6 20 I POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 I/O I/O I OE TIBPAL20R6-15C TIBPAL20R6-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 logic diagram (positive logic) CLK I 1 Increment 0 2 4 8 12 16 20 24 28 32 36 39 23 First Fuse Numbers I I I I I I I I I 3 4 5 6 7 8 9 10 0 40 80 120 160 200 240 280 22 320 360 400 440 480 520 560 600 I=0 1D 640 680 720 760 800 840 880 920 I=0 1D 960 1000 1040 1080 1120 1160 1200 1240 I=0 1D 1280 1320 1360 1400 1440 1480 1520 1560 I=0 1D 1600 1640 1680 1720 1760 1800 1840 1880 I=0 1D 1920 1960 2000 2040 2080 2120 2160 2200 I=0 1D 21 I I/O Q C1 20 Q C1 19 Q C1 18 Q C1 17 Q C1 16 Q C1 2240 2280 2320 2360 2400 2440 2480 2520 15 11 14 13 Fuse number = First fuse number + Increment Pin numbers shown are for JT, NT, and W packages. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 I/O I OE 7 TIBPAL20R8-15C TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 logic diagram (positive logic) CLK I 1 Increment 0 2 4 8 12 16 20 24 28 32 36 39 23 First Fuse Numbers I I I I I I I I I 3 4 5 6 7 8 9 10 0 40 80 120 160 200 240 280 I=0 1D 320 360 400 440 480 520 560 600 I=0 1D 640 680 720 760 800 840 880 920 I=0 1D 960 1000 1040 1080 1120 1160 1200 1240 I=0 1D 1280 1320 1360 1400 1440 1480 1520 1560 I=0 1D 1600 1640 1680 1720 1760 1800 1840 1880 I=0 1D 1920 1960 2000 2040 2080 2120 2160 2200 I=0 1D 2240 2280 2320 2360 2400 2440 2480 2520 I=0 1D Q C1 21 Q C1 20 Q C1 19 Q C1 18 Q C1 17 Q C1 16 Q C1 15 Q C1 11 14 13 Fuse number = First fuse number + Increment Pin numbers shown are for JT, NT, and W packages. 8 22 I POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 I OE TIBPAL20L8-15C, TIBPAL20R4-15C, TIBPAL20R6-15C, TIBPAL20R8-15C HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Voltage applied to disabled output (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 75°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C NOTE 1: These ratings apply except for programming pins during a programming cycle. recommended operating conditions VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage IOH IOL fclock UNIT 5.25 V 5.5 V V High-level output current −3.2 mA Low-level output current 24 mA 45 MHz Clock frequency 0 tsu† Setup time, input or feedback before clock↑ TA MAX 5 0.8 Pulse duration, clock † NOM 2 tw† th † † MIN 4.75 High 10 Low 12 ns 15 Hold time, input or feedback after clock↑ 0 Operating free-air temperature 0 ns ns 25 75 °C fclock, tw, tsu, and th do not apply for TIBPAL20L8’. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 TIBPAL20L8-15C, TIBPAL20R4-15C, TIBPAL20R6-15C, TIBPAL20R8-15C HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 electrical characteristics over recommended operating free-air temperature range PARAMETER TEST CONDITIONS VIK VCC = 4.75 V, II = − 18 mA VOH VCC = 4.75 V, IOH = − 3.2 mA VOL VCC = 4.75 V, IOL = 24 mA O, Q outputs IOZH MIN TYP† MAX UNIT −0.8 −1.5 V 0.3 0.5 2.4 V 20 V VCC = 5.25 V, VO = 2.7 V VCC = 5.25 V, VO = 0.4 V II VCC = 5.25 V, VI = 5.5 V 0.1 IIH‡ VCC = 5.25 V, VI = 2.7 V 25 μA IIL‡ VCC = 5.25 V, VI = 0.4 V −0.25 mA IOS§ VCC = 5.25 V, VO = 0.5 V −70 −130 mA ICC VCC = 5.25 V, Outputs open, VI = 0, OE at VIH 120 180 mA I/O ports O, Q outputs IOZL I/O ports 100 −20 −250 −30 μA μA mA switching characteristics over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER FROM (INPUT) fmax¶ TO (OUTPUT) MIN TYP† With feedback 37 40 Without feedback 45 50 TEST CONDITION tpd I, I/O O, I/O R1 = 200 Ω, tpd CLK↑ Q ten OE Q tdis OE↑ ten tdis UNIT MHz 12 15 ns R2 = 390 Ω, 8 12 ns See Figure 3 10 15 ns Q 8 12 ns I, I/O O, I/O 12 18 ns I, I/O O, I/O 12 15 ns † All typical values are at VCC = 5 V, TA = 25°C. For I/O ports, the parameters IIH and IIL include the off-state output current. § Not more than one output should be shorted at a time, and the duration of the short-circuit should not exceed one second. ¶ 1 , , f max(with feedback) + 1 t su ) t (CLK to Q) f max(without feedback) + t high ) t low pd w w fmax does not apply for TIBPAL20L8,. ‡ 10 MAX POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TIBPAL20L8-20M, TIBPAL20R4-20M, TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Voltage applied to disabled output (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C NOTE 1: These ratings apply except for programming pins during a programming cycle. recommended operating conditions NOM MAX 4.5 5 5.5 UNIT V 5.5 V Supply voltage VIH High-level input voltage VIL Low-level input voltage 0.8 V IOH High-level output current −2 mA Low-level output current 12 mA 41.6 MHz IOL fclock † 2 Clock frequency 0 tw† Pulse duration, clock tsu† Setup time, input or feedback before clock↑ th † TA † MIN VCC High 12 Low 12 ns 20 Hold time, input or feedback after clock↑ ns 0 Operating free-air temperature −55 ns 25 125 °C fclock, tw, tsu, and th do not apply for TIBPAL20L8’. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11 TIBPAL20L8-20M, TIBPAL20R4-20M, TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 electrical characteristics over recommended operating free-air temperature range PARAMETER TEST CONDITIONS VIK VCC = 4.5 V, II = − 18 mA VOH VCC = 4.5 V, IOH = − 2 mA VOL VCC = 4.5 V, IOL = 12 mA IOZH VCC = 5.5 V, VO = 2.7 V VCC = 5.5 V, VO = 0.4 V VCC = 5.5 V, VI = 5.5 V O, Q outputs IOZL‡ I/O ports II I/O ports IIH‡ VCC = 5.5 V, VI = 2.7 V IIL‡ VCC = 5.5 V, VI = 0.4 V IOS§ VCC = 5.5 V, VO = 0.5 V ICC VCC = 5.5 V, Outputs open, VI = 0, OE = VIH All others MIN 2.4 TYP† MAX UNIT −0.8 −1.5 V 3.2 0.3 V 0.5 V 100 μA −20 −250 1 100 25 −30 μA mA μA −0.25 mA −70 −250 mA 120 180 mA switching characteristics over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER FROM (INPUT) fmax¶ TO (OUTPUT) MIN TYP† With feedback 28.5 40 Without feedback 41.6 50 TEST CONDITION MAX UNIT MHz tpd I, I/O O, I/O R1 = 390 Ω, 12 20 ns tpd CLK↑ Q R2 = 750 Ω, 8 15 ns ten OE Q See Figure 3 10 20 ns tdis OE↑ Q 8 20 ns ten I, I/O O, I/O 12 25 ns tdis I, I/O O, I/O 12 20 ns † All typical values are at VCC = 5 V, TA = 25°C. ‡ For I/O ports, the parameters I and I include the off-state output current. IH IL § Not more than one output should be shorted at a time, and the duration of the short-circuit should not exceed one second. Set V at 0.5 V to O avoid test equipment ground degradation. ¶ 1 , , f max(with feedback) + 1 t su ) t (CLK to Q) f max(without feedback) + t high ) t low pd w w fmax does not apply for TIBPAL20L8,. 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TIBPAL20L8-15C, TIBPAL20R4-15C, TIBPAL20R6-15C, TIBPAL20R8-15C TIBPAL20L8-20M, TIBPAL20R4-20M, TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 programming information Texas Instruments programmable logic devices can be programmed using widely available software and inexpensive device programmers. Complete programming specifications, algorithms, and the latest information on hardware, software, and firmware are available upon request. Information on programmers capable of programming Texas Instruments programmable logic is also available, upon request, from the nearest TI field sales office, local authorized TI distributor, or by calling Texas Instruments at (214) 997-5666. preload procedure for registered outputs (see Figure 1 and Notes 2 and 3) The output registers can be preloaded to any desired state during device testing. This permits any state to be tested without having to step through the entire state-machine sequence. Each register is preloaded individually by following the steps given below. Step 1. Step 2. Step 3. Step 4. With VCC at 5 volts and Pin 1 at VIL, raise Pin 13 to VIHH. Apply either VIL or VIH to the output corresponding to the register to be preloaded. Pulse Pin 1, clocking in preload data. Remove output voltage, then lower Pin 13 to VIL. Preload can be verified by observing the voltage level at the output pin. VIHH Pin 13 td tsu tw VIL td VIH Pin 1 VIL VIH Registered I/O Input VOH Output VIL VOL Figure 1. Preload Waveforms NOTES: 2. Pin numbers shown are for JT, NT, and W packages only. If chip carrier socket adapter is not used, pin numbers must be changed accordingly. 3. td = tsu = th = 100 ns to 1000 ns VIHH = 10.25 V to 10.75 v POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 13 TIBPAL20L8-15C, TIBPAL20R4-15C, TIBPAL20R6-15C, TIBPAL20R8-15C TIBPAL20L8-20M, TIBPAL20R4-20M, TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021 D− D2920, JUNE 1986 − REVISED DECEMBER 2010 power-up reset (see Figure 2) Following power up, all registers are reset to zero. This feature provides extra flexibility to the system designer and is especially valuable in simplifying state-machine initialization. To ensure a valid power-up reset, it is important that the rise of VCC be monotonic. Following power-up reset, a low-to-high clock transition must not occur until all applicable input and feedback setup times are met. VCC 5V 4V tpd† (600 ns TYP, 1000 ns MAX) VOH Active Low Registered Output 1.5 V VOL tsu‡ CLK 1.5 V 1.5 V tw † ‡ This is the power-up reset time and applies to registered outputs only. The values shown are from characterization data. This is the setup time for input or feedback. Figure 2. Power-Up Reset Waveforms 14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VIH VIL TIBPAL20L8-15C, TIBPAL20R4-15C, TIBPAL20R6-15C, TIBPAL20R8-15C TIBPAL20L8-20M, TIBPAL20R4-20M, TIBPAL20R6-20M, TIBPAL20R8-20M HIGH-PERFORMANCE IMPACT™ PAL® CIRCUITS SRPS021A − D2920, JUNE 1986 − REVISED DECEMBER 2010 PARAMETER MEASUREMENT INFORMATION 5V S1 R1 From Output Under Test Test Point CL (see Note A) R2 LOAD CIRCUIT FOR 3-STATE OUTPUTS Timing Input 1.5 V 1.5 V (0.3 V) [0] Data Input (3.5 V) [3 V] 1.5 V 1.5 V (0.3 V) [0] (3.5 V) [3 V] VOH 1.5 V VOL tpd tpd 1.5 V VOH 1.5 V VOL (3.5 V) [3 V] 1.5 V Waveform 1 S1 Closed (see Note B) tdis 1.5 V tdis ten Waveform 2 S1 Open (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES 1.5 V (0.3 V) [0] ten tpd 1.5 V 1.5 V (0.3 V) [0] Output Control (low-level enabling) (0.3 V) [0] In-Phase Output 1.5 V VOLTAGE WAVEFORMS PULSE DURATIONS 1.5 V tpd (0.3 V) [0] (3.5 V) [3 V] Low-Level Pulse 1.5 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES Input 1.5 V tw th tsu Out-of-Phase Output (see Note D) (3.5 V) [3 V] High-Level Pulse (3.5 V) [3 V] ≈ 3.3 V VOL +0.5 V VOL VOH 1.5 V VOH −0.5 V ≈0V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance and is 50 pF for tpd and ten, 5 pF for tdis. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses have the following characteristics: For C suffix, use the voltage levels indicated in parentheses ( ). PRR ≤ 1 MHz, tr = tf ≤ 2 ns, duty cycle = 50%. For M suffix, use the voltage levels indicated in brackets [ ]. PRR ≤ 10 MHz, tr and tf ≤ 2 ns, duty cycle = 50%. D. When measuring propagation delay times of 3-state outputs, switch S1 is closed. E. Equivalent loads may be used for testing. Figure 3. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 15 TI Authorized TI North American Sales North American Offices Distributors ALABAMA: Huntsville: (205) 837-7530 ARIZONA: Phoenix: (602) 995-1007 CALIFORNIA: Irvine: (714) 660-1200 San Diego: (619) 278-9600 Santa Clara: (408) 980-9000 Woodland Hills: (818) 704-8100 COLORADO: Aurora: (303) 368-8000 CONNECTICUT: Wallingford: (203) 269-0074 FLORIDA: Altamonte Springs: (407) 260-2116 Fort Lauderdale: (305) 973-8502 Tampa: (813) 885-7588 GEORGIA: Norcross: (404) 662-7967 ILLINOIS: Arlington Heights: (708) 640-3000 INDIANA: Carmel: (317) 573-6400 Fort Wayne: (219) 489-4697 KANSAS: Overland Park: (913) 451-4511 MARYLAND: Columbia: (410) 964-2003 MASSACHUSETTS: Waltham: (617) 895-9100 MICHIGAN: Farmington Hills: (313) 553-1581 MINNESOTA: Eden Prairie: (612) 828-9300 MISSOURI: St. Louis: (314) 821-8400 NEW JERSEY: Iselin: (908) 750-1050 NEW MEXICO: Albuquerque: (505) 345-2555 NEW YORK: East Syracuse: (315) 463-9291 Fishkill: (914) 897-2900 Melville: (516) 454-6600 Pittsford: (716) 385-6770 NORTH CAROLINA: Charlotte: (704) 527-0930 Raleigh: (919) 876-2725 OHIO: Beachwood: (216) 765-7258 Beavercreek: (513) 427-6200 OREGON: Beaverton: (503) 643-6758 PENNSYLVANIA: Blue Bell: (215) 825-9500 PUERTO RICO: Hato Rey: (809) 753-8700 TEXAS: Austin: (512) 250-6769 Dallas: (214) 917-1264 Houston: (713) 778-6592 Midland: (915) 561-7137 UTAH: Salt Lake CIty: (801) 466-8972 WISCONSIN: Waukesha: (414) 798-1001 CANADA: Nepean: (613) 726-1970 Richmond Hill: (416) 884-9181 St. Laurent: (514) 335-8392 TI Regional Technology Centers CALIFORNIA: Irvine: (714) 660-8140 Santa Clara: (408) 748-2222 GEORGIA: Norcross: (404) 662-7945 ILLINOIS: Arlington Heights: (708) 640-2909 INDIANA: Indianapolis: (317) 573-6400 MASSACHUSETTS: Waltham: (617) 895-9196 MEXICO: Mexico City: 491-70834 MINNESOTA: Minneapolis: (612) 828-9300 TEXAS: Dallas: (214) 917-3881 CANADA: Nepean: (613) 726-1970 Alliance Electronics, Inc. (military product only) Almac/Arrow Anthem Electronics Arrow/Schweber Future Electronics (Canada) GRS Electronics Co., Inc. Hall-Mark Electronics Marshall Industries Newark Electronics Rochester Electronics, Inc. (obsolete product only (508) 462-9332) Wyle Laboratories Zeus Components TI Distributors ALABAMA: Arrow/Schweber (205) 837-6955; Hall-Mark (205) 837-8700; Marshall (205) 881-9235. ARIZONA: Anthem (602) 966-6600; Arrow/Schweber (602) 437-0750; Hall-Mark (602) 431-0030; Marshall (602) 496-0290; Wyle (602) 437-2088. CALIFORNIA: Los Angeles/Orange County: Anthem (818) 775-1333, (714) 768-4444; Arrow/Schweber (818) 380-9686, (714) 838-5422; Hall-Mark (818) 773-4500, (714) 727-6000; Marshall (818) 878-7000, (714) 458-5301; Wyle (818) 880-9000, (714) 863-9953; Zeus (714) 921-9000, (818) 889-3838; Sacramento: Anthem (916) 624-9744; Hall-Mark (916) 624-9781; Marshall (916) 635-9700; Wyle (916) 638-5282; San Diego: Anthem (619) 453-9005; Arrow/Schweber (619) 565-4800; Hall-Mark (619) 268-1201; Marshall (619) 578-9600; Wyle (619) 565-9171; Zeus (619) 277-9681. San Francisco Bay Area: Anthem (408) 453-1200; Arrow/Schweber (408) 441-9700, (510) 490-9477; Hall-Mark (408) 432-4000; Marshall (408) 942-4600; Wyle (408) 727-2500; Zeus (408) 629-4789. COLORADO: Anthem (303) 790-4500; Arrow/Schweber (303) 799-0258; Hall-Mark (303) 790-1662; Marshall (303) 451-8383; Wyle (303) 457-9953. CONNECTICUT: Anthem (203) 575-1575; Arrow/Schweber (203) 265-7741; Hall-Mark (203) 271-2844; Marshall (203) 265-3822. FLORIDA: Fort Lauderdale: Arrow/Schweber (305) 429-8200; Halll-Mark (305) 971-9280; Marshall (305) 977-4880. Orlando: Arrow/Schweber (407) 333-9300; Hall-Mark (407) 830-5855; Marshall (407) 767-8585; Zeus (407) 788-9100. Tampa: Hall-Mark (813) 541-7440; Marshall (813) 573-1399. GEORGIA: Arrow/Schweber (404) 497-1300; Hall-Mark (404) 623-4400; Marshall (404) 923-5750. ILLINOIS: Anthem (708) 884-0200; Arrow/Schweber (708) 250-0500; Hall-Mark (312) 860-3800; Marshall (708) 490-0155; Newark (312)784-5100. INDIANA: Arrow/Schweber (317) 299-2071; Hall-Mark (317) 872-8875; Marshall (317) 297-0483. IOWA: Arrow/Schweber (319) 395-7230. KANSAS: Arrow/Schweber (913) 541-9542; Hall-Mark (913) 888-4747; Marshall (913) 492-3121. MARYLAND: Anthem (301) 995-6640; Arrow/Schweber (301) 596-7800; Hall-Mark (301) 988-9800; Marshall (301) 622-1118; Zeus (301) 997-1118. MASSACHUSETTS: Anthem (508) 657-5170; Arrow/Schweber (508) 658-0900; Hall-Mark (508) 667-0902; Marshall (508) 658-0810; Wyle (617) 272-7300; Zeus (617) 246-8200. MICHIGAN: Detroit: Arrow/Schweber (313) 462-2290; Hall-Mark (313) 416-5800; Marshall (313) 525-5850; Newark (313) 967-0600. MINNESOTA: Anthem (612) 944-5454; Arrow/Schweber (612) 941-5280; Hall-Mark (612) 881-2600; Marshall (612) 559-2211. MISSOURI: Arrow/Schweber (314) 567-6888; Hall-Mark (314) 291-5350; Marshall (314) 291-4650. NEW JERSEY: Anthem (201) 227-7960; Arrow/Schweber (201) 227-7880, (609) 596-8000; Hall-Mark (201) 515-3000, (609) 235-1900; Marshall (201) 882-0320, (609) 234-9100. NEW MEXICO: Alliance (505) 292-3360. NEW YORK: Long Island: Anthem (516) 864-6600; Arrow/Schweber (516) 231-1000; Hall-Mark (516) 737-0600; Marshall (516) 273-2424; Zeus (914) 937-7400. Rochester: Arrow/Schweber (716) 427-0300; Hall-Mark (716) 425-3300; Marshall (716) 235-7620. Syracuse: Marshall (607) 785-2345. NORTH CAROLINA: Arrow/Schweber (919) 876-3132; Hall-Mark (919) 872-0712; Marshall (919) 878-9882. OHIO: Cleveland: Arrow/Schweber (216) 248-3990; Hall-Mark (216) 349-4632; Marshall (216) 248-1788. Columbus: Hall-Mark (614) 888-3313. Dayton: Arrow/Schweber (513) 435-5563; Marshall (513) 898-4480; Zeus (513) 293-6162. OKLAHOMA: Arrow/Schweber (918) 252-7537; Hall-Mark (918) 254-6110. OREGON: Almac/Arrow (503) 629-8090; Anthem (503) 643-1114; Marshall (503) 644-5050; Wyle (503) 643-7900. PENNSYLVANIA: Anthem (215) 443-5150; Arrow/Schweber (215) 928-1800; GRS (215) 922-7037; (609) 964-8560; Marshall (412) 788-0441. TEXAS: Austin: Arrow/Schweber (512) 835-4180; Hall-Mark (512) 258-8848; Marshall (512) 837-1991; Wyle (512) 345-8853; Dallas: Anthem (214) 238-7100; Arrow/Schweber (214) 380-6464; Hall-Mark (214) 553-4300; Marshall (214) 233-5200; Wyle (214) 235-9953; Zeus (214) 783-7010; Houston: Arrow/Schweber (713) 530-4700; Hall-Mark (713) 781-6100; Marshall (713) 467-1666; Wyle (713) 879-9953. UTAH: Anthem (801) 973-8555; Arrow/Schweber (801) 973-6913; Marshall (801) 973-2288; Wyle (801) 974-9953. WASHINGTON: Almac/Arrow (206) 643-9992, Anthem (206) 483-1700; Marshall (206) 486-5747; Wyle (206) 881-1150. WISCONSIN: Arrow/Schweber (414) 792-0150; Hall-Mark (414) 797-7844; Marshall (414) 797-8400. CANADA: Calgary: Future (403) 235-5325; Edmonton: Future (403) 438-2858; Montreal: Arrow/Schweber (514) 421-7411; Future (514) 694-7710; Marshall (514) 694-8142 Ottawa: Arrow/Schweber (613) 226-6903; Future (613) 820-8313. Quebec: Future (418) 897-6666. Toronto: Arrow/Schweber (416) 670-7769; Future (416) 612-9200; Marshall (416) 458-8046. Vancouver: Arrow/Schweber (604) 421-2333; Future (604) 294-1166. TI Die Processors Chip Supply Elmo Semiconductor Minco Technology Labs (407) 298-7100 (818) 768-7400 (512) 834-2022 Customer Response Center TOLL FREE: OUTSIDE USA: (800) 336-5236 (214) 995-6611 (8:00 a.m. − 5:00 p.m. CST) D0892 ©1992 Texas Instruments Incorporated SRPS021 PACKAGE OPTION ADDENDUM www.ti.com 17-Dec-2015 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) 5962-87671013A ACTIVE LCCC FD 28 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 596287671013A TIBPAL20 L8-20MFDB 5962-8767101KA ACTIVE CFP W 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767101KA TIBPAL20L8-20M WB 5962-8767101LA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767101LA TIBPAL20L8-20M JTB 5962-87671043A ACTIVE LCCC FD 28 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 596287671043A TIBPAL20 R4-20MFDB 5962-8767104LA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767104LA TIBPAL20R4-20M JTB 8412901LA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 8412901LA TIBPAL20L8-20M JTB 8412901XA ACTIVE LCCC FK 28 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 8412901XA TIBPAL20 L8-20MFKB 8412902LA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 8412902LA TIBPAL20R8-20M JTB 8412903LA NRND CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 8412903LA TIBPAL20R6-20M JTB 8412904LA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 8412904LA TIBPAL20R4-20M JTB JM38510/50501BLA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 50501BLA JM38510/50502BLA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 50502BLA Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 17-Dec-2015 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking TBD Call TI Call TI -55 to 125 JM38510/ 50503BLA (4/5) JM38510/50503BLA OBSOLETE CDIP JT 24 JM38510/50504BLA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 50504BLA M38510/50501BLA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 50501BLA M38510/50502BLA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 50502BLA M38510/50503BLA OBSOLETE CDIP JT 24 TBD Call TI Call TI -55 to 125 M38510/50504BLA ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 50504BLA TIBPAL20L8-20MJT ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 TIBPAL20L8-20M JT TIBPAL20L8-20MJTB ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767101LA TIBPAL20L8-20M JTB TIBPAL20L8-20MWB ACTIVE CFP W 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767101KA TIBPAL20L8-20M WB TIBPAL20R4-20MJT ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 TIBPAL20R4-20M JT TIBPAL20R4-20MJTB ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767104LA TIBPAL20R4-20M JTB TIBPAL20R6-20MJTB NRND CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767103LA TIBPAL20R6-20M JTB TIBPAL20R8-20MJTB ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8767102LA TIBPAL20R8-20M JTB (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 17-Dec-2015 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 MECHANICAL DATA MCER004A – JANUARY 1995 – REVISED JANUARY 1997 JT (R-GDIP-T**) CERAMIC DUAL-IN-LINE 24 LEADS SHOWN PINS ** A 13 24 B 1 24 28 A MAX 1.280 (32,51) 1.460 (37,08) A MIN 1.240 (31,50) 1.440 (36,58) B MAX 0.300 (7,62) 0.291 (7,39) B MIN 0.245 (6,22) 0.285 (7,24) DIM 12 0.070 (1,78) 0.030 (0,76) 0.100 (2,54) MAX 0.320 (8,13) 0.290 (7,37) 0.015 (0,38) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.014 (0,36) 0.008 (0,20) 0.100 (2,54) 4040110/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP3-T24, GDIP4-T28, and JEDEC MO-058 AA, MO-058 AB POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated