Hirose HSCP-HRFCJ-1AS Sc type fiber optic connector Datasheet

SC Type Fiber Optic Connectors
MU
HSC Series
SC
FC
■Features
1. JIS, IEC standards compliant and fully intermateable with NTT's SC products.
Harsh
Environment
JIS C 5973 (F04 type fiber optic connectors)
IEC 61754-4
2. Plugs with strain relief boot
Long strain relief boot assures that there are no performance losses when a pull force is applied in a vertical
bend direction.
The color of the boot identify the type of polishing:
Blue: PC polishing
Light purple: Advanced PC (AdPC) polishing
Green: Angled PC polishing (APC)
Other colors are also possible.
3. Zirconia Split Sleeve Adapter
Reduces the possibility of powdering caused by the repeated insertion and withdrawal of ferrule.
Attenuators
4. Duplex SC Type: Rigid Type
Available in following types;
H type – 8.5 mm spacing between the fibers, for high density applications.
F type – 12.7 mm spacing between the fibers, low profile, for LAN applications.
Refer to page 39 for further information.
5. Duplex SC Type: Adjustable Type -- Comply With ANSI Standards
Floating mechanism with Duplex SC plug.
It is also fully compatible with the HSCF fixed type.
6. Simplified Plugs and Receptacles.
Terminators
Small size (23.8mm plug length) simplified SC plug is designed for equipments inside connection.
Refer to page 43 for further information.
■Applications
LAN, public communications lines, CableTV, computer transmission systems, test equipment, and other
applications requiring reliable fiber optic connections.
25
■Product Specifications
Ratings
Operating temperature range
Optical
Characteristics
MU
Item
Insertion Loss
-25°C to +70°C
Storage temperature range
(SM)
Test Method (IEC 61300)
Wavelength 1310nm (LD)
Specifications
0.5dB max. (PC, AdPC, APC)
(GI)
Wavelength 1310nm (LED)
0.3dB max. (PC)
Wavelength 1310nm (LD)
22dB min. (PC)
60dB min. (APC)
(SM)
Return Loss
(GI)
Measured with corresponding connector.
Harsh
Environment
Environmental
Characteristics
FC
Mechanical Characteristics
SC
/force
Extract zirconia gauge 2.499 ±0.0005 mm dia
from split sleeve.
Copper alloy split sleeve
Zirconia split sleeve
Cable retention
(Straight pull)
89N tensile load for one minute.
1) Insertion loss fluctuation after test: 0.2dB max.
2) No visible damage, dislocation of clamp or cable.
Durability
(cycles, mating/un-mating)
1000 times
Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Shock
Acceleration of 981 m/s2, 6 ms duration,
sin half-wave waveform, 10 cycles in each of the 3 axis.
Humidity
(Temperature/ humidity- cycles)
-10°C to 65°C, humidity: 90% to 96%
20 cycles
Change of temperature
-40°C to +75°C 42 cycles
(Complies with Telcordia standard GR-326-CORE)
Dry heat
960 hours at 85°C
Cold
960 hours at -25°C
Salt mist
48 hours in a 5% concentration of salt mist
Part
Attenuators
Duplex plug
Engagement force: 19.6 N max.
Separation force: 19.6 N max.
Engagement force: 39 N max.
Separation force: 39 N max.
Ferrule withdrawal force
■Materials
Terminators
40dB min. (AdPC)
22dB min. (PC)
Simplex plug
Engagement and Separation
26
-25°C to +70°C
Material
Simplex plug housing
Synthetic resin
Spring
Stainless steel
Ferrule
Zirconia
Simplex adapter housing
Synthetic resin or Zinc alloy
4-position adapter housing
Synthetic resin
5-position adapter housing
Synthetic resin
Receptacle housing
Zinc alloy
Attenuator housing
Zinc alloy
Split sleeve
Zirconia or Copper alloy
Dust cap
Synthetic resin
2N to 5.9N
2N to 3.9N
1) Insertion loss fluctuation after test: 0.2dB max.
2) No visible damage, cracks or part dislocation.
No significant corrosion.
■Function diagram
Simplex type
Adapter-Panel Mounting
SC type plug housing
Strain relief type
(For Cable Diameter: 2 mm & 3mm)
MU
Plastic Housing Products
HSC-A3
HSC-A3-D1
HSC-A3-D2
Die Cast Housing Products
HSC-A2
HSC-A2-D1
HSC-PH2-E1,E2,E5
HSC-PH3-B1,B2,B5
HSC-PH0.9-E1,E2,E5
Short length type
(For Cable Diameter: 2mm)
HSC-PH2-E1-A
Short length type
(For Cable Diameter: 3mm)
Conversion adapter
FC to SC - Screw Mounting
SC
0.9 mm fiber
Light weight type
HSCJ-HRFCJ-B
FC to SC - Panel Mounting
HSCJ-HRFCJ-C
ST to SC - Screw Mounting
FC
HSCJ-HSTJ-B
HSC-PH3-A4
Receptacle
Conversion adapter
- FC jack to SC Plug
HSCP-HRFCJ-1, 2
HSCP-HRFCJ-1AS, 2AS
HSC-R1-B,R2-B
Harsh
Environment
Simplified receptacle
HSC-SR-1,D1
HSC-SR-2,D2
<Tool Insertion/Extraction Connectors>
SC2 type plug housing
Attenuators
Strain relief
(For Cable Diameter: 2 mm & 3mm)
Adapter
HSC2-PH2-E1,E2,E5
HSC2-PH3-B1,B2,B5
4-Position Adapter
Panel Mounting type
0.9 mm fiber Type
HSC2-4A
HSC2-4A-D1
5-Position Adapter
Panel Mounting type
Short length type
(For Cable Diameter: 2 mm)
HSC2-5A
HSC2-PH2-E1-A
Terminators
HSC2-PH0.9-E1,E2
Simplified receptacle
Short length type
(For Cable Diameter: 3mm)
HSC2-PH3-A
HSC2-8SR-1
HSC2-8SR-D1
27
Duplex type
MU
<Plug Housings>
<Adapters>
F type
Plug Housing
(For Cable Diameter: 2mm&3mm)
HSCF-2PH2-E1,E2
HSCF-2PH3-B1,B2
SC
<Complies with ANSI
Standard for adjustable Type>
F type
For Single mode
(For Cable Diameter: 2mm&3mm)
Panel Mounting
HSCF-2A(P)
HSCF-2A-D(P)
HSCM-2SPH2-B1,B2
HSCM-2SPH3-B1,B2
For Multi mode
(For Cable Diameter: 2 mm & 3mm)
H type
FC
HSCM-2GPH2-B1
HSCM-2GPH3-B1
Snap - in
HSCH-2A1(P)
HSCH-2A1-D(P)
H type
Plug Housing
(For Cable Diameter: 2 mm & 3mm)
Screw Mounting
HSCH-2A(P)
HSCH-2A-D(P)
Harsh
Environment
HSCH-2PH2-B1,B2
HSCH-2PH3-B1,B2
Attenuators
Fixed attenuators
For single mode
For GI
HSC-AT 11K-A**
HSC-AT5S-B**A
See Page 85 for details.
Terminators
Plug type
Tool- Insertion/Removal
Terminators
HSC-TM-P1
HSC2-TM-P1
Receptacle type
Tool Insertion/Removal
HSC-TM-R1
See Page 89 for details.
28
HSC2-TM-R1
Simplex type
MU
●Strain relief type
1.8
55
9
25
7.4
0.9
CL No.
704-0327-3-31
Fiber cable type
HSC-PH2-E2(31)
704-0328-6-31
HSC-PH2-E5(31)
704-3108-6-31
HSC-PH3-B1(31)
704-0222-5-31
HSC-PH3-B2(31)
704-0223-8-31
HSC-PH3-B5(31)
704-3020-7-31
Ø2mm
Ø3mm
●Light weight type (For 0.9mm fiber)
Boot color
Polishing type Outer jacket fixing
Blue
PC
Light purple
AdPC
Green
APC
Blue
PC
Light purple
AdPC
Green
APC
SC
Part Number
HSC-PH2-E1(31)
Glue
Crimp
33
9
1.8
FC
25
7.4
0.9
Boot color
Part Number
CL No.
HSC-PH0.9-E1(06)
704-0339-2-06
Blue
HSC-PH0.9-E2(31)
704-0354-6-31
Light purple
AdPC
HSC-PH0.9-E5(31)
704-3104-5-31
Green
APC
PC
Harsh
Environment
●Short length type (For 2mm Cable)
Polishing type
36.5
9
1.8
25
7.4
0.9
CL No.
HSC-PH2-E1-A(31)
704-0464-4-31
Blue
HSC-PH2-E2-A(31)
704-0480-0-31
Light purple
AdPC
Green
APC
HSC-PH2-E5-A
Boot color
704-3124-2
Polishing type
Attenuators
Part Number
Outer jacket fixing
PC
Glue
●Short length type (For 3mm Cable)
36.5
1.8
9
Terminators
25
7.4
0.9
Part Number
CL No.
HSC-PH3-A4(31)
Boot color
704-0245-0-31
Blue
HSC-PH3-A4(32)
704-0245-0-32
Light purple
Polishing type
PC
AdPC
Outer jacket fixing
Crimp
29
MU
■Tool Insertion/Extraction Plug Housings
●Strain relief type
7.2
55
FC
SC
6
Part Number
CL No.
HSC2-PH2-E1(31)
704-0329-9-31
HSC2-PH2-E2(31)
704-0330-8-31
HSC2-PH2-E5(31)
704-3109-9-31
Green
APC
HSC2-PH3-B1(31)
704-0226-6-31
Blue
PC
HSC2-PH3-B2(31)
704-0227-9-31
Light purple
AdPC
HSC2-PH3-B5
704-3123-0
Green
APC
Fiber cable type
Boot color
Ø2mm
Ø3mm
●Light weight type (For 0.9mm fiber)
Polishing type Outer jacket fixing
Blue
PC
Light purple
AdPC
Glue
Crimp
7.2
33
Harsh
Environment
6
Part Number
CL No.
HSC2-PH0.9-E1(31)
704-0421-1-31
Blue
HSC2-PH0.9-E2(31)
704-0422-4-31
Light purple
●Short length type (For 2mm Cable)
Boot color
Polishing type
PC
AdPC
Attenuators
7.2
36.5
6
Part Number
CL No.
Boot color
HSC2-PH2-E1-A
704-0482-6
Blue
HSC2-PH2-E2-A
704-0481-3
Light purple
Polishing type
PC
AdPC
Outer jacket fixing
Glue
●Short length type (For 3mm Cable)
7.2
Terminators
36.5
6
Part Number
CL No.
Boot color
Polishing type
Outer jacket attachment
HSC2-PH3-A(31)
704-0015-0-31
Blue
PC
Crimp
Note : Please contact HIROSE for other variations.
30
■Receptacles
15.2
12.2
M
15
12.8
Ø7
Ø3
MU
Ø19
13.4
9
2-Ø2.3
Note: Designed for power meter sensors
Part Number
CL No.
Remarks
HSC-R1-B(05)
704-0022-6-05
For MM
HSC-R2-B(05)
704-0023-9-05
For SM
SC
Ø1 (Hole diameter)
Ø2.499±0.0005
3
16
1.8
7.95 +0.05
0
FC
1.5
Ø4.6
●For PC, AdPC and UPC
ØA+0.001
(Hole diameter)
0
■Ferrules
0.125
HSC-F321-A1255(10)
704-0200-2-10
0.1255
HSC-F321-A126(10)
704-0071-1-10
0.126
1.8
Ø4.6
Ø1
16.15
8.095 +0.05
0
SM,MM
Attenuators
Ø2.499±0.0005
●For APC
Applicable Fiber cable
Ø1(Hole diameter)
A dimension
(Hole diameter)
ØA +0.001
0
CL No.
704-0070-9-10
Harsh
Environment
Part Number
HSC-F321-A125(10)
Part Number
CL No.
A dimension
HSC-F391-A125
704-3101-7
0.125
HSC-F391-A126
704-3102-0
0.126
HSC-F391-A127
704-3103-2
0.127
SM
Terminators
(1)No gap design.
Applicable Fiber cable
Minimal gap:(0.1mm max.)
(2)The entrance angle of the fiber has been set at 60° for easy fiber insertion.
60° fiber entrance angle
31
■Adapters - Panel Mounting
●SC adapters
BPanel cutout
9.4
1.8
18
22
12.8
13 +0.5
0.5
27.4
3
18±0.1
MU
SC/SC Plastic Housing
9.5
Ø2.3
CL No.
704-0092-1-51
704-0217-5-02
704-3007-9-06
Split sleeve
Copper alloy
Zirconia
Zirconia
Remarks
PC,AdPC(Blue)
APC(Green)
BPanel cutout
9.4
1.8
FC
18
22
9.5
Ø2.3
Part Number
HSC-A2(51)
HSC-A2-D1(01)
Harsh
Environment
+0.2
0.5
18±0.1
27.4
3
12.8
SC/SC Die Cast Metal Housing
2-M2∞0.4
or 2-Ø2.4
Panel thickness: 1.6mm
13 +0.5
0.5
SC
Part Number
HSC-A3(51)
HSC-A3-D1(02)
HSC-A3-D2(06)
0.5
0.5
0.5
0.5
2-M2∞0.4
or 2-Ø2.4 +0.2
0.5
Panel thickness: 1.6mm
CL No.
704-0020-0-51
704-0258-2-01
Split sleeve
Copper alloy
Zirconia
●SC2 adapters
BPanel cutout
Attenuators
28.5
1.8
28.2
15
12.8
24
3
+0.2
0.5
SC/SC2 4-way adapter
13 +0.5
0.5
Panel thickness: 1.6mm
Part Number
HSC2-4A(51)
HSC2-4A-D1(01)
BPanel cutout
SC/SC2 5-way adapter (for Multi-mode fiber)
35
35.3 +0.5
+0.5
1.8
15
12.8
Terminators
24
3
Split sleeve
Copper alloy
Zirconia
CL No.
704-0024-1-51
704-0290-5-01
+0.5
13 +0.5
Panel thickness: 1.6mm
Part Number
HSC2-5A(51)
32
CL No.
704-0025-4-51
Split sleeve
Copper alloy
■Conversion adapters
●FC / SC Screw Mounting
BPanel cutout
Ø9
+0.5
+0.5
MU
13.4
9
21.2
5.5 3.5
12.2
2-M2∞0.4
or 2-Ø2.4 +0.2
+0.5
Ø19
12.8
M8∞0.75
13.4±0.1
15
CL No.
Split sleeve
704-0021-3-51
Copper alloy
SC
Part Number
HSCJ-HRFCJ-B(51)
BPanel cutout
●FC / SC Snap-in and/or Screw Mounting
9.4
2-M2∞0.4
or 2-Ø2.4 +0.2
+0.5
FC
18±0.1
18
21.2
M8∞0.75
+0.5
0.5
18
22
12.8
Ø9
Ø2.3
Panel thickness: 1.6mm
Part Number
CL No.
Split sleeve
HSCJ-HRFCJ-C(51)
704-0206-9-51
Copper alloy
Harsh
Environment
●ST / SC Screw Mounting
BPanel cutout
Ø19
13.4
9
+0.5
2-M2∞0.4
or 2-Ø2.4 +0.2
+0.5
2-Ø2.2
13.4 ±0.1
.2
Ø8
1.2
2
Ø7
12.8
15
Ø9+0.5
14.7
13.7
Part Number
CL No.
Split sleeve
HSCJ-HSTJ-B(51)
704-0102-3-51
Copper alloy
Attenuators
28.4
Terminators
33
●FC / SC
M8∞0.75
9
12.8
MU
9.4
7.4
21
(1.8)
27.9
SC
Part Number
CL No.
Split sleeve
HSCP-HRFCJ-1(51)
704-0203-0-51
HSCP-HRFCJ-1AS(51)
704-0288-3-51
HSCP-HRFCJ-2(51)
704-0204-3-51
HSCP-HRFCJ-2AS(51)
704-0289-6-51
Polishing type Applicable Fiber cable
PC
Copper alloy
AdPC
PC
AdPC
GI-50/125
SM-9.5/125
●The positions of SC guide key and FC guide slot will not be always aligned.
(3.9)
32
13.7
Part Number
Harsh
Environment
7.4
Ø19
FC
19.5
15
●FC / SC
9
12.8
CL No.
Split sleeve
Polishing type Applicable Fiber cable
HRFCP-HSCJ-1(51)
701-0065-0-51
PC
HRFCP-HSCJ-1AS(51)
701-0108-0-51
AdPC
HRFCP-HSCJ-2(51)
701-0085-7-51
PC
HRFCP-HSCJ-2AS(51)
701-0109-3-51
AdPC
Copper alloy
GI-50/125
SM-9.5/125
●The positions of SC guide slot and FC guide key will not be always aligned.
■Cap
5
75
Terminators
17.8
17.8
11
Attenuators
Ø3.6 Hole
34
Part Number
CL No.
Applicable products
HSC-C2
704-0061-8
HSC-A2 , HSC-A3 , HSCJ-HRFCJ-B ,
CHSCJ-HSTJ-B , HSC-R1-B , HSC-R2-B
BMounting Dimensions
Unit: mm
Combination
Housing
a
b
c
d
e
f
58
28
15.2
53.4
23.4
10.6
39.5
28
15.2
34.9
23.4
10.6
36
26
15.2
31.4
21.4
10.6
58
----
13.5
53.4
----
8.9
39.5
----
13.5
34.9
----
8.9
36
----
13.5
31.4
----
8.9
57.5
27.5
14.7
----
----
----
MU
Adapter
Dimensions
HSC-PH2-E1
Plug
Plug
Panel
HSC-A2
Adapter
HSC-A2-D1
HSC-A3
HSC-A3-D1
HSC-PH2-E2
HSC-PH3-B1
HSC-PH3-B2
HSC-PH2-E1-A
HSC-PH3-A4
HSC-PH0.9-E1
HSC2-4A
HSC2-4A-D1
HSC2-5A
HSC2-5A-D1
HSC2-PH2-E2
HSC2-PH3-B1
SC
HSC2-PH2-E1
HSC2-PH3-B2
HSC2-PH3-A
HSC-PH2-E1-A
HSC2-PH0.9-E1
HSC-PH2-E1
HSC-PH2-E1
HSC-R2-B
HSC-PH3-B1
FC
HSC-R1-B
HSC-PH3-B2
Note: Panel thickness: 1.6mm
Harsh
Environment
Attenuators
Terminators
35
■Tools
MU
●Crimp Tool
Part Number
CL No.
Applicable connector
HSC-T3
704-0287-0
SC plug for 2mm, 3mm cable.
SC
<Locations>
(1)2mm Jacket crimping: section A
3mm Jacket crimping: section C
(2)KevlarTM crimping: section B
Harsh
Environment
FC
●HSC2 Insertion/Extraction Tool
Part Number
CL No.
Applicable Products
HSC-T1-L
704-0286-8
HSC2 series.
<How to operate>
Attenuators
1.Open the tip of tool by compressing levers as shown below.
Hold/release lever
2.Insert the tool (with opening the tips) into adapter.
3.Release the levers (then the tool catch HSC2 plug) and you can release the connector.
Terminators
●Plug assemble Tool
36
Part Number
CL No.
HSC2-PH2/CVMD
902-6029-1
SC Duplex
BNotes
MU
SC duplex adapters can be also connected with Simplex SC plugs.
SC type attenuators (HSC-AT11K-Aπ-π) can be connected only with F type adapters.
■Plug Housing
●F Type
22.1
12.7
SC
7.8
25
Part Number
HSCF-2PH2-E1(P)(31)
HSCF-2PH2-E2(P)(31)
HSCF-2PH3-B1(P)(31)
HSCF-2PH3-B2(P)(31)
CL No.
704-2109-3-31
704-2120-6-31
704-2032-0-31
704-2036-1-31
Applicable Cable Diameter
Ø2mm
Ø3mm
Boot Color
Blue
Light purple
Blue
Light purple
FC
55
Polishing type
PC
AdPC
PC
AdPC
Harsh
Environment
●H Type
15.89
8.5
9
Attenuators
25
55
CL No.
704-2046-5-31
704-2058-4-31
704-2054-3-31
704-2050-2-31
Applicable Cable Diameter
Ø2mm
Ø3mm
Boot Color
Blue
Light purple
Blue
Light purple
Polishing type
PC
AdPC
PC
AdPC
Terminators
Part Number
HSCH-2PH2-B1(P)(31)
HSCH-2PH2-B2(P)(31)
HSCH-2PH3-B1(P)(31)
HSCH-2PH3-B2(P)(31)
37
■Adapters
BPanel cutout
●F type Snap-in and/or Screw Mounting
MU
.3
Ø2
9.5
25.9
9
12.7
34.7
30.7
M2×0.4 or
2.4 +0.2
0
26.2 +0.3
0
30.7±0.1
3 1.8
27.4
9.4
SC
Part Number
HSCF-2A(P)(51)
HSCF-2A-D(P)(06)
HSCF-2A-D2(P)(06)
Panel thickness: 1.6mm
CL No.
704-2008-6-51
704-2040-9-06
704-2112-8-06
Split sleeve
Copper alloy
Blue
Zirconia
Green
BPanel cutout
●H type Snap-in
27.4
15.5
12.8
FC
18 +0.5
0
20.5
17.9
CL No.
704-2066-2-51
704-2117-1-02
704-2137-9
Split sleeve
Copper alloy
Color
Blue
Zirconia
Green
BPanel cutout
●H type Snap-in and/or Screw Mounting
M2∞0.4 or Ø2.4
3
1.8
18
12.8
Ø2.3
+0.2
0
18 +0.5
0
17.9
(8.5)
23
+0.3
0
Panel thickness: 1.6mm
Part Number
HSCH-2A1(P)(51)
HSCH-2A1-D(P)(02)
HSCH-2A1-D2(P)
Harsh
Environment
13
1.8
3
(8.5)
Attenuators
Color
13
27.4
+0.3
0
18±0.1
Panel thickness: 1.6mm
Terminators
Part Number
HSCH-2A(P)(51)
HSCH-2A-D(P)(02)
HSCH-2A-D2(P)(03)
38
CL No.
704-2020-1-51
704-2062-1-02
704-2108-0-03
Split sleeve
Copper alloy
Zirconia
Color
Blue
Green
BMounting Dimensions
MU
Plug
Plug
Adapter
Panel
<F Type>
Unit: mm
Combination
HSCF-2A(P)
HSCF-2A-D(P)
Housing
a
b
c
d
e
f
58
28
15.2
53.4
23.4
10.6
39.5
36
28
26
15.2
15.2
34.9
31.4
23.4
21.4
10.6
10.6
a
b
c
d
e
f
58
28
15.2
53.4
23.4
10.6
39.5
36
28
26
15.2
15.2
34.9
31.4
23.4
21.4
10.6
10.6
HSC-PH*-E#
HSCF-PH*-B#(P)
HSC-PH*-A4
HSC-PH0.9-E#
SC
Adapter
Dimensions
<H Type>
Combination
Adapter
HSC-PH*-E#
HSCH-2PH*-B#(P)
HSC-PH*-A4
HSC-PH0.9-E#
Note 1: * indicates cable diameter:
Note 2: # indicates polishing type:
FC
HSCH-2A(P)
HSCH-2A-D(P)
HSCH-2A1(P)
Dimensions
Housing
2= Ø2mm diameter
3= Ø3mm diameter
1= PC polishing
2= AdPC polishing
Harsh
Environment
Attenuators
Terminators
39
Complies with ANSI Standard
MU
ANSI X3T9.3 Fibre Channel Physical and Signaling Interface
■Plug Housings
●For Single Mode
8.99
SC
1
23
12.7
1.8
9.9
14.1
36.7
FC
61.5
Part Number
CL No.
Applicable cable
HSCM-2SPH2-B1
704-2100-9
Simplex-2mm dia. cable or dual fiber zip cable
HSCM-2SPH3-B1
704-2102-4
Simplex-3mm dia. cable or dual fiber zip cable
HSCM-2SPH2-B2
704-2133-8
Simplex-2mm dia. cable or dual fiber zip cable
HSCM-2SPH3-B2
---------
Simplex-3mm dia. cable or dual fiber zip cable
●For Multi-mode
Boot color Polishing type
Blue
PC
Light purple
AdPC
Harsh
Environment
1.8
8.99
23
12.7
1.8
9.9
14.1
36.7
61.5
Attenuators
■Ferrules
Convertional SC ferrules.
Refer to page 33 for details.
■Adapters
F type SC adapters.
Terminators
Refer to page 40 for details.
40
Part Number
CL No.
Applicable cable
HSCM-2GPH2-B1
704-2104-0
Simplex-2mm dia. cable or dual fiber zip cable
HSCM-2GPH3-B1
704-2106-5
Simplex-3mm dia. cable or dual fiber zip cable
Boot color Polishing type
Blue
PC
Simplified Receptacles & Plug
■Features
MU
1.Space saving
Types of SC plug
Length(mm)
Simplified plug
23.8
SC plug for 0.9mm fiber
33
Size comparison
SC
SC
Simplified Plug
FC
Installation image
(33)
Harsh
Environment
SC plug
(23)
Simplified plug
Attenuators
Split sleeve
Terminators
41
■Product Specifications
Ratings
Operating temperature range
FC
Environmental
Characteristics
SC
Mechanical Characteristics
Optical
Characeristics
MU
Item
Insertion Loss
Return Loss
-25°C to +70°C
Test Method (IEC 61300)
Wavelength 1310nm (LD)
0.5dB max. (PC, AdPC)
(GI)
Wavelength 1310nm (LED)
0.3dB max. (PC)
(SM)
(GI)
Wavelength 1310nm (LD)
Ferrule withdrawal
Extract zirconia gauge 2.499 ±0.0005 mm dia
from split sleeve.
Durability
(cycles, mating/un-mating)
1000 times
Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Shock
Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 10 cycles in each of the 3 axis.
Humidity resistance
(Temperature/ humidity- cycles)
Temperature: -10°C to 65°C, humidity: 90% to 96%
20 cycles
Change of temperature
Temperature: -40°C / +75°C 42cycles
(Complies with Telcordia standard GR-326-CORE)
Dry Heat
960 hours at 85°C
Cold
960 hours at -25°C
Harsh
Environment
Attenuators
●Simplified receptacle
Part
Material
Housing
Synthetic resin
Sleeve
Synthetic resin
Split sleeve
Zirconia or Copper alloy
Plate
Stainless steel
Dust cap
Synthetic resin
●Simplified plug
Part
Material
Ferrule
Zirconia and Synthetic resin
Boot
Synthetic resin
Ferrule cap
Synthetic resin
Terminators
●Simplified plug extraction tool
Part
Material
Extraction tool
Synthetic resin
-25°C to +70°C
Specifications
(SM)
■Materials
42
Storage temperature range
22dB min. (PC) 40dB min. (AdPC)
22dB min. (PC)
Copper alloy split sleeve
Zirconia split sleeve
2N to 5.9N
2N to 3.9N
Insertion loss fluctuation after test: 0.2dB max.
No visible damage, cracks or part dislocation.
■Simplified receptacle to SC
BPanel cutout
Ø2
.3
●Simplex / Shrouded
2-
13 +0.5
0
18±0.1
12.8
22
18
12.8
9
SC
SR
MU
.4
∞0
M2
2
JAPAN
3
26
7.4
9.4
9.5 +0.5
0
CL No.
704-0320-4-51
704-0321-7-02
704-0320-4-03
Split sleeve
Copper alloy
Zirconia
None
●Simplex / Unshrouded
SC
Part Number
HSC-SR-1(51)
HSC-SR-D1(02)
HSC-SR-1(03)
3
16.2
8 +0.5
0
CL No.
704-0291-8-51
704-0292-0-06
704-0291-8-03
17.9
15.9
( 8.5 )
Split sleeve
Copper alloy
Zirconia
None
BPanel cutout
∞0
.4
26
2-
M2
3
12.8
23
18
12.8
9
18 +0.5
0
1.8
13 +0.5
0
18±0.1
Ø2
2-
7.4
17.9
15.9
( 8.5 )
CL No.
704-0293-3-51
704-0294-6-01
704-0293-3-03
Attenuators
.3
Panel thickness: 1.6mm
Part Number
HSCH-2SR-1(R)(51)
HSCH-2SR-D1(R)(01)
HSCH-2SR-1(R)(03)
Split sleeve
Copper alloy
Zirconia
None
BPanel cutout
26
∞0
.4
3
2-
18 +0.5
0
12.8
13 +0.5
0
18±0.1
3
.
Ø2
2-
7.4
Terminators
23
18
12.8
9
M2
●Duplex H type / Shrouded (Without plate)
Harsh
Environment
●Duplex H type / Shrouded
9.35
7.8
Part Number
HSC-SR-2(51)
HSC-SR-D2(06)
HSC-SR-2(03)
FC
JAPAN
12.7 +0.5
0
18±0.1
6.3
12.5
22
18
12.5
9
SC
SR
2-M
2∞
0.4
BPanel cutout
Part Number
HSCH-2SR-3(R)(51)
HSCH-2SR-D3(R)(01)
HSCH-2SR-3(R)(03)
CL No.
704-0300-7-51
704-0301-0-01
704-0300-7-03
Split sleeve
Copper alloy
Zirconia
None
43
BPanel cutout
2-
Ø2
.3
●Duplex F Type / Unshrouded
8 +0.5
0
25.5
6.3
+0.2
0
9
19
34.7
25.5
21.7
12.7
MU
2SR
SCR
2-M2∞0.4 or 2-Ø2.4
25.7 +0.5
0
30.7±0.1
16.2
3 9.4
SC
Part Number
HSCF-2SR-2(P)(51)
HSCF-2SR-D2(P)(02)
HSCF-2SR-2(P)(03)
7.8
CL No.
704-0295-9-51
704-0296-1-02
704-0295-9-03
Split sleeve
Copper alloy
Zirconia
None
■Simplified Receptacles to SC2
BPanel cutout
24.3
10.73
4SR
JAPAN
JAPAN
FC
8+0.5
0
37.4
33.4
28.2
4SR
12.4
+0.2
0
12.7+0.5
0
Part Number
HSC2-4SR-1(51)
HSC2-4SR-D1(01)
HSC2-4SR-1(03)
Harsh
Environment
.4
r 2-Ø2
0.4 o
2-M2∞
0
28.6 +0.5
2Ø2
.3
●4-position / Shrouded
CL No.
704-0311-3-51
704-0312-6-01
704-0311-3-03
Split sleeve
Copper alloy
Zirconia
None
●8-Position / Shrouded
BPanel cutout
24.3
Ø
2.4
or 2-Ø
∞0.4
2-M2
8SR
+0.2
0
6
56
+0.5
0
55.4
60.6
64.6
Attenuators
8SR
10.7 3
60.6±0.1
3
2.
12.4
+0.5
12.7 0
Terminators
Part Number
HSC2-8SR-1(51)
HSC2-8SR-D1(01)
HSC2-8SR-1(03)
44
CL No.
704-0266-0-51
704-0270-8-01
704-0266-0-03
Split sleeve
Copper alloy
Zirconia
None
●8-Position / Unshrouded
BPanel cutout
.3
+0.2
0
Ø2.4
r 20.4 o
∞
2-M2
MU
Ø2
14.5
11.5 3
64.6
60.6
55.4
56+0.5
0
60.6±0.1
8SR
JAPAN
12.7+0.5
0
12.4
FC
5
5
Ø2.449
±0.0005
■Simplified plug
●for 0.9mm fiber
Split sleeve
Copper alloy
Zirconia
None
ØA+0.001
(Hole diameter)
0
CL No.
704-0318-2-51
704-0403-0-01
704-0318-2-03
SC
Part Number
HSC2-8SR-2(51)
HSC2-8SR-D2(01)
HSC2-8SR-2(03)
4.5
10.3
Part Number
HSC2-FK-A125(31)
23.8
CL No.
A dimension
704-0267-3-31
0.125
704-0268-6-31
0.126
HSC2-FK-A1255(31)
704-0269-9-31
0.1255
Black
Harsh
Environment
HSC2-FK-A126(31)
Boot color
■Split sleeve
Zirconia
11.4
Copper alloy
CL No.
Split sleeve
704-0275-1-51
Copper alloy
704-0264-5
Zirconia
HSC-D
Attenuators
Part Number
HSC-SLIT-SLEEVE(51)
■Extraction tool for Simplified plug
Terminators
7
5
6
6
20
30
20
Part Number
CL No.
Part Number
CL No.
HSC-T10
704-0350-5
HSC-T12
704-0448-8
45
Similar pages