ETC2 LED40W-114 Switch mode led driver Datasheet

LED-40W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<20.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
0.40 Amps max
Maximum Power:
40W
Current Accuracy:
± 1% Over input line variation
Load Regulation:
± 3%
THD:
<
_ 20% @ full load
Leakage Current:
400 µA Typical
Hold Up Time:
Half Cycle
Output Protection:
Over-Voltage, Over-Current, and
Short Circuit Protection with Auto Recovery
Environmental Specifications
• Total Power: 40 Watts
• Input Voltage: 100-277 Vac
• UL Dry & Damp Location Rated
• IP66 & NEMA4
• High Power Factor
• UL Sign Components
Manual (S.A.M. Models)
Constant Current - Product Specifications
Model Number
Output Current
(mA ±5%)
Output Voltage
Range (Vdc)
Max Output
Power (W)
Max
Efficiency
87%
LED40W-114-C0350-XX
350
38-114
40
LED40W-100-C0400-XX
400
33-100
40
87%
LED40W-089-C0450-XX
450
30-89
40
87%
Maximum Case Temp.
90°C
LED40W-054-C0700-XX
700
18-54
37.8
86%
LED40W-048-C0830-XX
830
16-48
40
86%
Minimum Starting Temp:
-30ºC
LED40W-045-C0900-XX
900
15-45
40
86%
Storage Temperature:
-40ºC to +85ºC
LED40W-040-C1000-XX
1000
13-40
40
85%
Humidity:
5% to 95%
LED40W-036-C1100-XX
1100
12-36
40
86%
Cooling:
Convection
LED40W-030-C1300-XX
1300
10-30
39.0
86%
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
LED40W-030-C1400-XX
1400
10-30
42
85%
LED40W-024-C1300-XX
1300
8-24
31.2
86%
Sound Rating:
Class A
LED40W-024-C1400-XX
1400
8-24
33.6
86%
MTBF:
82,000 Hours at full load and 40ºC ambient conditions
4
per MIL-217F Notice 2
LED40W-024-C1670-XX
1670
8-24
40
86%
LED40W-022-C1820-XX
1820
7-22
40
86%
FCC 47CFR Part 15 Class B compliant
LED40W-018-C2220-XX
2200
6-18
40
85%
LED40W-015-C2680-XX
2680
5-15
40
85%
Ordering Options:
LED40W-013-C3080-XX
3080
4-13
40
85%
-D:2-wire dimmable model dims 100% to 10%. Two extra wires included on the output side:
+Purple/-Gray. This model is offers 0-10V & Resistance dimming, compatible with most
quality 0-10V dimmers. See page 3.
LED40W-012-C3330-XX
3330
4-12
40
84%
LED40W-010-C4000-XX
4000
3-10
40
84%
LED40W-009-C4450-XX
4450
3-9
40
83%
EMC:
-D3:3-wire dimmable model dims 100% to 10%. Three extra wires included on the output side:
Yellow/Purple/Gray. This model is suitable for potentiometer dimming. See page 3.
-XX indicates dimming options are available. See options below. Blank = fixed current output
Constant Voltage - Product Specifications
Model Number
9
1113-4450
40
83%
10
1000-4000
40
84%
12
833-3330
40
84%
13
770-3080
40
85%
LED40W-015
15
670-2680
40
85%
18
550-2200
40
85%
22
455-1820
40
86%
24
418-1670
40
86%
30
350-1400
42
85%
LED40W-036
36
275-1100
40
86%
LED40W-040
40
250-100
40
85%
LED40W-022
Specifications subject to change without notice.
•
LED40W-018
LED40W-024
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Max
Efficiency
LED40W-009
LED40W-012
E332160
Max Output
Power (W)
LED40W-010
LED40W-013
Sign Components Manual
Output Voltage Output Current
(Vdc ±5%)
Range (mA)
LED40W-030
•
LED40W-045
45
225-900
40
86%
LED40W-048
48
208-830
40
86%
LED40W-054
54
175-700
40
86%
LED40W-089
89
113-450
40
87%
LED40W-100
100
100-400
40
87%
LED40W-114
114
88-350
40
87%
• Indicates S.A.M.
Class 2:
US/Canada
Rev 10-13-16
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 3
Dimensions - IN [mm]
5.91 Min [150 Min]
1.18 [30.0]
1.26 [32.0]
1.85 [47.0]
0.16 [4.0]
0.2 [5.0]
0.39±0.04 [10.0±1]
3.74 [95.0]
INPUT
White (N)
Black (L)
Tc = 90°C max
OUTPUT
Red (+)
Blue (-)
0.39 [10.0]
0.39±0.04 [10.0±1]
Dimming
Purple (+)
Gray (-)
0.39 [10.0]
1.18 [30.0]
2.76 [70.0]
5.91 Min [150 Min]
Power Factor / Load (LED40W Rev E1.1 models)
1.00
0.16 [4.0]
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
Typical Efficiency / Load
THD / Load (LED40W Rev E1.1 models)
25%
100%
0.95
20%
0.85
120Vac
277Vac
0.75
120Vac
277Vac
15%
THD
PF
0.80
95%
0.70
Efficiency
0.90
10%
90%
85%
120Vac
277Vac
80%
0.65
0.60
(LED40W Rev E1.1)
5%
75%
0.55
0.50
50%
60%
70%
80%
90%
Load
100%
Lifetime / Case Temperature
130
Lifetime (kHrs)
115
90
75
60
45
30
0%
50%
50
55
60
65
70
75
80
85
Case Hotspot Temperature (°C)
90
70%
80%
Load
90%
Safety Cert.
UL/CUL
CSA
CE
EMC Standard
EN61000-3-2
EN61000-3-3
FCC, 47CFR Part 15
Standard
UL8750
22.2
EN61347
Notes
EN6100-4-5
2KV L-N, 8/20 μsec
Surge Protection
15
0
45
60%
100%
70%
60%
70%
80%
Load
90%
Class C
Class B
UL Conditions of Acceptability
See website for additional information
Note:
The area under the life-temperature curve represents where the driver
has highly reliable operation within specification. Driver performance
may drift out of published specifications as the hours of operation
exceed the curve at a given temperature. Higher operating
temperatures increase the chances of a failure to function.
Other electrical, mechanical and environmental factors affect
driver lifetime but are not represented in this calculation.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
100%
LED40W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 3
“-D” and “-D3” Option: 0-10VDC and Resistance Dimming
Parameters
Minimum
Typical
Maximum
0 mA
-2.0 V
—-
———-
2 mA
+15 V
10mA
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Yellow Wire
Source Current out of Aux Yellow Wire
“-D” Typical Dimming Circuit
“-D3” 3-Wire Dimming Circuit
10V Output (Yellow)
Dim (+) Purple
LED40W-xxx-Cxxxx-D
IP710 Wall Dimmer
LED40W-xxx-Cxxxx-D3
Dim (-) Gray
0-10V Input (Purple)
Return (Gray)
20K
Potentiometer
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Control Voltage
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
Purple-to-Gray Voltage (Vdc)
8V
9V
10V
Notes:
1.
2.
3.
4.
D dimmable version comes with an extra two wires on the output side: +Purple/-Gray.
Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent.
D & D3 dimmable versions are not intended to dim below about 5% @ 0V or 10% @ 1.0V.
Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Similar pages