ITT CA01COM-PG16-1SW-B-DN Industrial connector Datasheet

Industrial Connectors
CA-COM
COM-7/0300
#1171_CA-COM_englisch_250900
1
18.10.2000, 8:20 Uhr
CA-COM
Introduction
ITT Industries, Cannon connectors series
CA-COM and CA-COM-B are derivations of
connectors according to MIL-C-5015 or
VG95234. They were developed especially
for industrial applications. Connectors of
both CA-COM series are interchangeable
with the corresponding types as per MILC-5015 and VG95234, as they offer the
same mounting dimensions and contact
arrangements.
The CA-COM and CA-COM-B connector
series offer
• Wall mounting receptacles
• Cable connecting plugs
• Box mounting receptacles
• Straight plugs
• Plugs 90°
Wall mounting receptacles and cable
connecting plugs (straight and 90°) are
available with
• Endbell with cable clamp
• Endbell for flex tubes
• Adapter combined for PG terminations
acc. to DIN 46320
• Adapter for heat shrink boots
Furthermore Cannon also provides the
appropriate accessories like
• Protective metal caps
• Sash chains
• Cable clamps
• Cable bushings
• Sealing gaskets
CA-COM
CA-COM-B
• Threaded coupling
• Mateable with all connectors according
to MIL-C-5015 and series CA respectively
• Either solder or crimp contacts
• Contact arrangements with 1 to 37
contacts
• Wire sizes from 0,14 up to 2,5 mm2
• Shells made of aluminum alloy enable
to withstand high mechanical strain*
• Surface protected by nickel plating
• Resilient insulator (polychloroprene)
for wide temperature range
(–55/125°C)
• Resistant against aggressive fluids like
fuel, oil, etc.
• Environmental by means of an adapter
for PG termination, universal endbell
and heat shrink boots
• Min 500 mating cycles
• Spray-waterproof IP67
• Bayonet coupling
• Mateable with all connectors according
to VG95234 and series CA-B respectively
• Either solder or crimp contacts
• Contact arrangements with 1 to 37
contacts
• Wire sizes from 0,14 to 2,5 mm2
• Shells made of aluminum alloy enable
to withstand high mechanical strain*
• Surface protected by nickel plating
• Resilient insulator (polychloroprene)
for wide temperature range
(–55/125°C)
• Resistant against aggressive fluids like
fuel, oil, etc.
• Environmental by means of an adapter
for PG termination, universal endbell
and heat shrink boots
• Min 500 mating cycles
• Waterproof (1 bar, 12 hours)
Contents
Introduction ........................................... 2
Connector design .................................. 2
Technical data ........................................ 3
How to order ........................................ 4
Contact arrangements. .......................... 5
Mounting dimensions ........................... 10
Separating and coupling dimensions .... 11
Shell styles and dimensions .................. 12
Accessories ............................................ 33
Contact dimensions .............................. 37
Tools ..................................................... 38
Product safety information ................... 40
Note: * Receptacle size 14S and barrels size 18 + 20 are made of Zinc dicast
material.
All dimensions are in mm
Subject to changes
2
#1171_CA-COM_englisch_250900
2
18.10.2000, 8:20 Uhr
CA-COM
Electrical data
Mechanical data
Rated current
20°C ambient temperature
Max operating temperature
acc. to DIN IEC 68, part 1 –55/125°C
Contact size
AWG / metric
15S
15
25
100
Mating cycles
Rated current
A max1)
22
22
41
74
Min separating force per contact
1
) This applies only to the max. rated current for one
contact. If several contacts in one contact arrangement
are loaded with higher current the specific heat and
the ambient temperature may not exceed +125°C.
Rated current vs. ambient temperature
Contact size
metric
15S
15
25
100
Contact resistance
mΩ max
6
6
3
1
Insulation resistance > 1000 MΩ
Air and creepage paths mm (min)
Instr.
0,7
0,7
A
1,1
1,1
Test force
N
35
35
55
80
Coupling torque
The allowable coupling torque has to be
tested under harnessed conditions
Contact resistance (Millivolt test)
Voltage class
Air path mm
Creepage path mm
Separating force
N
1,0
1,0
1,5
3,0
Contact retention
Test force to be applied in mating direction
Contact size
metric
15S
15
25
100
Contact size
metric
15S
15
25
100
min 500
D
2,8
2,8
Operating Voltage and connector usage
When the connectors in this catalogue are
used for voltages greater than 50 Volts and
have touchable conductive shell parts they
must be used in accordance with the safety
regulations DIN VDE Part 410; IEC 603644-41. This regulation basically dictates that
the power source should be turned off
before any mating and unmating of the
connector, this regulation does not provide
for protection against electrical shock
when mating and unmating the connectors in the live condition.
Shell
size
10SL
12S
14S
16S/16
18
20
22
24
28
32
36
Allowable coupling torque
Closing and opening
Opening
(N max)
(N min)
CA-COM
CA-COM-B CA-COM,
CA-COM-B
3,0
2,6
0,15
2,8
2,8
0,23
5,9
3,0
0,35
7,0
3,5
0,46
8,0
4,0
0,58
9,0
4,5
0,7
10,6
5,0
0,8
12,9
6,0
0,8
16,7
7,0
0,92
18,1
8,5
1,02
23,9
10,0
1,05
Materials
Shell
Contacts
Insulator
Aluminum alloy, Zinc dicast
nickel plated
Copper alloy, silver plated
Polychloroprene
3
#1171_CA-COM_englisch_250900
3
18.10.2000, 8:20 Uhr
CA-COM
CA
CA
How to order
06
06
COM-E
COM-E
18-1
18-1
P
P
W
xx
W - B - xx
Series
CA - Cannon designation
Shell style
00 - Wall mount receptacle
01 - Cable connecting plug
02 - Box mount receptacle
20 - Box mount receptacle for rear wall
mounting (Bayonett coupling only)
06 - Plug, straight
08 - Plug 90°
Class
COM-E - Endbell with cable clamp 1)
COM-F - Endbell for flex tube
COM-PG - Adapter for PG termination,
environmental
COM-L - PCB Solder termination
COM-IN - universal endbell
Shell size
10SL, 12S, 14S, 16, 16S, 18,
20, 22, 24, 28, 32*, 36* (* = upon request)
Contact arrangement
see pages 6 – 8
Contact type
P - Pin contact
S - Socket contact
Alternate insert position
Insert insulator position – see page 9
Coupling
B - Bayonet coupling
- without designation: threaded coupling
Modification
01 - metric crimp contacts
03 - Adapter for heat shrink boots and metric
crimp contacts (only for bayonet coupling
by shell style 01 + 06 class -E)
06 - Adapter for heat shrink boots and solder
contacts (only for bayonet coupling by
shell style 01 + 06 class -E)
44 - with end ring and grommet
(for class E and F only)
48 - F-Endbell with O-ring
DN - Adapter for heat shrink boots and solder
contacts (Mod. for threaded coupling)
F0 - without contacts (to be ordered separately)
1
) except shell style 02 / 20
All dimensions are in mm
Subject to changes
4
#1171_CA-COM_englisch_250900
4
18.10.2000, 8:20 Uhr
CA-COM
Contact arrangements
On pages 6 – 8 the contact arrangements are shown by shell sizes. The table below
gives an overview on the number of contacts, recommended contact and wire sizes and
the service rating class. Other contact arrangements acc. to MIL-C-5015 and VG 95234
upon request.
Shell size
10SL
12S
14S
16
16S
18
20
22
24
28
Contact
arrangement
10SL-3
10SL-4
12SA10
14S-2
14S-5
14S-6
14SA7
16-10
16S-1
18-1
Number of
contacts
3
2
4
4
5
6
7
3
7
10
Contact size
metric
15S
15S
15S
15S
15S
15S
15S
25
15S
15
Wire size
mm2
0,75 – 1,5
0,75 – 1,5
0,75 – 1,5
0,75 – 1,5
0,75 – 1,5
0,75 – 1,5
0,75 – 1,5
2,0 – 3,0
0,75 – 1,5
0,75 – 1,5
18-8
18-10
18-11
18-12
20-15
20-17
7+1
4
5
6
7
1
5
3
14
17
19
14
8
24
35
15 + 25
25
25
15
25
15
25
100
15
15
15
15
25
15
15
1 – 1,5 + 2,5
2,0 – 3,0
2,0 – 3,0
0,75 – 1,5
2,0 – 3,0
0,75 – 1,5
2,0 – 3,0
10
0,75 – 1,5
0,75 – 1,5
0,75 – 1,5
0,75 – 1,5
2,0 – 3,0
0,75 – 1,5
0,75 – 1,5
20-19
20-27
20-29
22-14
22-19
22-23
24-28
28-15
Service rating
nach IEC
A
A
A
Inst.
Inst.
Inst.
Inst.
A
A
A (B, C, F, G)
Inst. (all others)
A
A
A
A
A
A
A
A
A
A
A
A
D (H)
Inst.
A
Additional contact arrangements (per MIL-C-5015 and VG95234) upon request.
Wire selection
Contact size
Metric
15S
15
25
100
Wire sizes for crimp and solder contacts
Metric
Conductor
mm2
∅ mm2
0,75 – 1,5
1,6 – 3,3
0,75 – 1,5
1,6 – 3,3
2,0 – 3,0
2,9 – 4,3
10,0
4,2 – 6,5
Stripping lengths of wires
Strip wires carefully. Do not damage conductors and insulation.
For solder connections, wires have to be pretinned. Do not twist conductors used in
crimp contacts, otherwise no perfect crimp connection will be achieved. Do not touch
conductors before crimping. Film of grease or lubricants on the strands will cause poor
crimp quality.
Stripping length for contacts sizes 15S, 15 and 25 is 6,2 mm.
5
#1171_CA-COM_englisch_250900
5
18.10.2000, 8:20 Uhr
CA-COM
Contact Arrangements
Contact
arrangement
Contact size
metric
Service
rating
3
10SL-3
15S
A
-
-
-
-
6
9
2
10SL-4
15S
A
-
-
-
-
4
6
4
12SA10
15S
A
-
-
-
-
6
8
4
14S-2
15S
Inst.
-
120
240
-
7
11
5
14S-5
15S
Inst.
-
110
-
-
9
13
6
14S-6
15S
Inst.
-
-
-
-
11
15
7
14SA7
15S
Inst.
-
-
-
-
10
15
7
16S-1
15S
A
-
-
-
-
14
19
3
16-10
25
A
90
180
270
-
17
24
No. of
contacts
Insulator position
W
X
Y
Insulator weight (g)
including contacts
pin
socket
All dimensions are in mm
Subject to changes
6
#1171_CA-COM_englisch_250900
Z
6
18.10.2000, 8:20 Uhr
CA-COM
Contact Arrangements
Contact
arrangement
Contact size
metric
Service
rating
10
18-1
15
A
(B, C, F, G)
70
145
-
8
1
7
18-8
15
25
A
70
-
4
18-10
25
A
-
5
18-11
25
A
6
18-12
15
7
No. of
contacts
Insulator position
W
X
Y
Z
Insulator weight (g)
including contacts
pin
socket
290
24
37
-
290
18
30
120
240
-
13
22
-
170
265
-
31
40
A
80
-
-
280
15
25
20-15
25
A
80
-.
-
280
27
46
6
1
5
20-17
15
25
A
90
180
270
-
20
33
3
20-19
100
A
90
180
270
-
33
46
14
20-27
15
A
35
110
250
325
26
42
7
#1171_CA-COM_englisch_250900
7
18.10.2000, 8:20 Uhr
CA-COM
Contact Arrangements
Contact
arrangement
Contact size
metric
Service
rating
17
20-29
15
A
80
-
-
280
29
19
22-14
15
A
80
-
-
280
30
50
14
22-19
15
A
80
110
250
280
28
47
8
22-23
25
D(H)
A (all others)
35
-
250
-
34
54
24
24-28
15
Inst.
80
110
250
280
40
65
35
28-15
15
A
80
110
250
280
54
90
37
28-21
15
A
80
110
250
280
58
93
No. of
contacts
Insulator positions
W
X
Y
Insulator weight (g)
including contacts
pin
socket
47
All dimensions are in mm
Subject to changes
8
#1171_CA-COM_englisch_250900
Z
8
18.10.2000, 8:20 Uhr
CA-COM
Alternate insert positions
Alternate insert positions are available to
prevent cross-plugging of adjacent connectors. The standard position is without
designation. All other insert positions are
designated W, X, Y and Z. See table below.
View on mating face of pin insert
Contact
arrangement
10SL-3
10SL-4
12SA10
14S-2
14S-5
14S-6
14SA7
16S-1
16-10
18-1
18-8
18-10
18-11
18-12
20-15
20-17
20-19
20-27
20-29
22-14
22-19
22-23
24-28
28-15
28-21
W
X
Y
Z
90
70
70
80
80
90
90
35
80
80
80
35
80
80
80
120
110
180
145
120
170
180
180
110
110
110
110
110
240
270
240
265
270
270
250
250
250
250
250
250
290
290
280
280
325
280
280
280
280
280
280
9
#1171_CA-COM_englisch_250900
9
18.10.2000, 8:20 Uhr
CA-COM
Mounting dimensions
Mounting holes for connectors styles
CA00COM/CA00COM-B, CA02COM/
CA02COM-B and CA20COM-B
Shell
size
10SL
12S
14S
16S/16
18
20
22
24
28
32
36
CA-COM Threaded
D H12
CA00...
CA02...
CA20...
16,0
16,4
19,1
16,4
22,3
19,7
25,5
22,9
28,7
26,1
31,8
29,5
35,0
32,7
38,2
36,0
44,5
42,0
50,9
48,3
57,2
53,1
d H13
E-0,15
3,4
3,4
3,4
3,4
3,4
3,4
3,4
3,9
3,9
4,6
4,6
18,2
20,6
23,0
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
d H13
3,4
3,4
3,4
3,4
3,4
3,4
3,4
3,9
3,9
4,6
4,6
All dimensions are in mm
Subject to changes
10
#1171_CA-COM_englisch_250900
CA-COM-Bayonet
D H12
CA00...
CA02...
CA20...
18,5
16,4
21,7
16,4
24,9
19,7
27,7
22,9
31,1
26,1
34,5
29,5
37,8
32,7
41,3
36,0
47,1
42,0
53,8
48,3
60,0
53,1
10
18.10.2000, 8:21 Uhr
CA-COM
Separating and coupling dimensions
CA06COM-E
CA06COM-E-B
CA02COM-E
CA02COM-E-B
CA08COM-E
CA08COM-E-B
CA06COM-E-DN
CA06COM-E-B-03/-06
CA06COM-F
CA06COM-F-B
CA02COM-E
CA02COM-E-B
CA06COM-E-DN
CA06COM-E-B
CA02COM-E
CA20COM-E
CA02COM-E-B
CA20COM-E-B
CA06COM-PG
CA06COM-PG-B
Shell
size
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
A
min
70
70
70
70
80
80
80
80
110
110
110
110
B
min
70
75
75
90
100
100
100
100
120
120
180
190
C
min
65
65
65
65
70
70
70
70
90
90
90
100
D
min
80
80
80
80
100
110
110
110
120
120
120
130
E
min
70
75
75
65
90
95
95
95
105
105
115
120
F
min
65
70
80
80
100
110
110
110
120
120
120
130
H
max
3,5
3,5
3,5
3,5
3,5
3,5
3,5
3,5
5,0
5,0
6,0
6,0
11
#1171_CA-COM_englisch_250900
11
18.10.2000, 8:21 Uhr
CA-COM
Wall mounting receptacle, Class PG
CA00COM-PG-B
with bayonet coupling
CA00COM-PG-B is a wall mounting
receptacle for usage of PG
terminations. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin insert*
CA00COM-PG10SL-**-P*-BCA00COM-PG12S-**-P*-BCA00COM-PG14S-**-P*-BCA00COM-PG16S-**-P*-BCA00COM-PG16-**-P*-BCA00COM-PG18-**-P*-BCA00COM-PG20-**-P*-BCA00COM-PG22-**-P*-BCA00COM-PG24-**-P*-BCA00COM-PG28-**-P*-BCA00COM-PG32-**-P*-BCA00COM-PG36-**-P*-B-
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B
Thread
PG9
PG9
PG11
PG13,5
PG13,5
PG13,5
PG16
PG16
PG16
PG21
PG29
PG29
C
max
18
18
22
24
24
25
27
27
27
32
41
41
D
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
E
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
F
max
56
56
56
58
66
73
74
77
77
78
78
89
G
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
H
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
J
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
CA00COM-PG
with threaded coupling
CA00COM-PG is a wall mounting
receptacle for usage of PG
terminations. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin insert*
CA00COM-PG10SL-**-P*
CA00COM-PG12S-**-P*
CA00COM-PG14S-**-P*
CA00COM-PG16S-**-P*
CA00COM-PG16-**-P*
CA00COM-PG18-**-P*
CA00COM-PG20-**-P*
CA00COM-PG22-**-P*
CA00COM-PG24-**-P*
CA00COM-PG28-**-P*
CA00COM-PG32-**-P*
CA00COM-PG36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B
Thread
PG9
PG9
PG11
PG13,5
PG13,5
PG13,5
PG16
PG16
PG16
PG21
PG29
PG29
C
max
18
19
22
24
24
25
27
27
27
32
41
41
D
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
E
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
F
max
52
52
52
54
64
69
70
73
74
74
76
87
G
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
H
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
I
+0,2/–0,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,7
3,7
4,4
4,4
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
All dimensions are in mm
Subject to changes
12
#1171_CA-COM_englisch_250900
12
18.10.2000, 8:21 Uhr
CA-COM
Wall mounting receptacle, Class E
CA00COM-E-B
with bayonet coupling
CA00COM-E-B is a wall mounting
receptacle with endbell and cable
clamp. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin Insert*
CA00COM-E10SL-**-P*-BCA00COM-E12S-**-P*-BCA00COM-E14S-**-P*-BCA00COM-E16S-**-P*-BCA00COM-E16-**-P*-BCA00COM-E18-**-P*-BCA00COM-E20-**-P*-BCA00COM-E22-**-P*-BCA00COM-E24-**-P*-BCA00COM-E28-**-P*-BCA00COM-E32-**-P*-BCA00COM-E36-**-P*-B-
B1)
+0,4
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
C
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
D
+0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
E
max
57
57
59
60
68
72
72
72
78
79
78
78
F
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
CA00COM-E
with threaded coupling
CA00COM-E is a wall mounting
receptacle with endbell and cable
clamp. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin Insert*
CA00COM-E10SL-**-P*
CA00COM-E12S-**-P*
CA00COM-E14S-**-P*
CA00COM-E16S-**-P*
CA00COM-E16-**-P*
CA00COM-E18-**-P*
CA00COM-E20-**-P*
CA00COM-E22-**-P*
CA00COM-E24-**-P*
CA00COM-E28-**-P*
CA00COM-E32-**-P*
CA00COM-E36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B1)
+0,4
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
C
± 0,3
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
D
max
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
E
± 0,1
53
53
55
56
66
68
68
68
76
76
76
76
F
± 0,3
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
+0,2 /–0,1
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,7
3,7
4,4
4,4
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
13
#1171_CA-COM_englisch_250900
13
18.10.2000, 8:21 Uhr
CA-COM
Wall mounting receptacle, Class F
CA00COM-F-B
with bayonet coupling
CA00COM-F-B is a wall mounting
receptacle with endbell for flex
tubes. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin insert*
CA00COM-F10SL-**P*-BCA00COM-F12S-**P*-BCA00COM-F14S-**P*-BCA00COM-F16S-**P*-BCA00COM-F16-**P*-BCA00COM-F18-**P*-BCA00COM-F20-**P*-BCA00COM-F22-**P*-BCA00COM-F24-**P*-BCA00COM-F28-**P*-BCA00COM-F32-**P*-BCA00COM-F36-**P*-B-
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B1)
8,2
8,2
11,1
14,3
14,3
16,7
19,8
19,8
25,4
27,0
32,5
35,7
C
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF-2A
1-7/16-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
D
min
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
11,0
11,8
E
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
F
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
G
max
50
50
50
50
57
59
59
62
62
64
64
66
H
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
I
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
K
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
CA00COM-F
with threaded coupling
CA00COM-F is a wall mounting
receptacle with endbell for flex
tubes. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin Insert*
CA00COM-F10SL-**-P*
CA00COM-F12S-**-P*
CA00COM-F14S-**-P*
CA00COM-F16S-**-P*
CA00COM-F16-**-P*
CA00COM-F18-**-P*
CA00COM-F20-**-P*
CA00COM-F22-**-P*
CA00COM-F24-**-P*
CA00COM-F28-**-P*
CA00COM-F32-**-P*
CA00COM-F36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B1)
8,2
8,2
11,1
14,3
14,3
16,7
19,8
19,8
25,4
27,0
32,5
35,7
C
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF-2A
1-7/16-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
D
min
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
11,0
11,8
E
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
F
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
G
max
45
45
45
45
54
54
55
58
59
60
62
64
H
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
I
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
K
+0,2/–0,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,7
3,7
4,4
4,4
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
All dimensions are in mm
Subject to changes
14
#1171_CA-COM_englisch_250900
14
18.10.2000, 8:21 Uhr
CA-COM
Wall mounting receptacle, Class E
CA00COM-E-B/-03/-06
with bayonet coupling
CA00COM-E-B/-03/-06 is a wall
mounting receptacle (wire sealing)
for heat shrink boots. It mates
with plugs CA06COM-B and
CA08COM-B.
Part No.
Pin Insert*
CA00COM-E10SL-**-P*-BCA00COM-E12S-**-P*-BCA00COM-E14S-**-P*-BCA00COM-E16S-**-P*-BCA00COM-E16-**-P*-BCA00COM-E18-**-P*-BCA00COM-E20-**-P*-BCA00COM-E22-**-P*-BCA00COM-E24-**-P*-BCA00COM-E28-**-P*-BCA00COM-E32-**-P*-BCA00COM-E36-**-P*-B-
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
45,7
53,4
59,6
B
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
C
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D 1)
7,7
7,9
10,6
13,5
13,5
14,6
18,7
20,8
24,6
27,0
33,3
38,5
E
max
13,3
13,3
17,0
21,9
21,9
21,9
26,2
26,2
34,5
34,5
43,6
43,6
F
± 0,2
15,5
15,5
19,1
23,9
23,9
23,9
29,6
29,6
37,8
37,8
47,8
47,8
G
± 0,5
11,7
11,7
11,7
11,7
11,5
11,5
12,7
12,7
12,7
12,7
15,2
15,2
H
max
53
53
53
53
61
62
64
64
64
66
69
70
I
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
K
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
L
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
CA00COM-E-DN
with threaded coupling
CA00COM-E-DN is a wall mounting
receptacle with endbell (wire sealing)
for heat shrink boots. It mates with
plugs CA06COM and CA08COM.
Part No.
Pin Insert*
CA00COM-E10SL-**-P*-DN
CA00COM-E12S-**-P*-DN
CA00COM-E14S-**-P*-DN
CA00COM-E16S-**-P*-DN
CA00COM-E16-**-P*-DN
CA00COM-E18-**-P*-DN
CA00COM-E20-**-P*-DN
CA00COM-E22-**-P*-DN
CA00COM-E24-**-P*-DN
CA00COM-E28-**-P*-DN
CA00COM-E32-**-P*-DN
CA00COM-E36-**-P*-DN
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
C
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D1)
7,7
7,9
10,6
13,5
13,5
14,6
14,6
20,8
24,6
27,0
33,3
38,5
E
max
13,3
13,3
17,0
21,9
21,9
21,9
26,2
26,2
34,5
34,5
43,6
43,6
F
± 0,2
15,5
15,5
19,1
23,9
23,9
23,9
23,9
29,6
37,8
37,8
47,8
47,8
G
± 0,5
11,7
11,7
11,7
11,7
11,5
11,5
12,7
12,7
12,7
12,7
15,2
15,2
H
max
49
49
49
49
58
58
60
60
63
63
67
68
I
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
27,0
31,8
34,9
39,7
44,5
49,2
K
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
35,0
41,0
44,5
50,8
57,0
63,5
L
+0,2/–0,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,7
3,7
4,4
4,4
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
15
#1171_CA-COM_englisch_250900
15
18.10.2000, 8:21 Uhr
CA-COM
Cable connecting plug, Class PG
CA01COM-PG-B
with bayonet coupling
CA01COM-PG-B is a cable
connecting plug for usage of PG
terminations. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin Insert*
CA01COM-PG10SL-**-P*-B
CA01COM-PG12S-**-P*-B
CA01COM-PG14S-**-P*-B
CA01COM-PG16S-**-P*-B
CA01COM-PG16-**-P*-B
CA01COM-PG18-**-P*-B
CA01COM-PG20-**-P*-B
CA01COM-PG22-**-P*-B
CA01COM-PG24-**-P*-B
CA01COM-PG28-**-P*-B
CA01COM-PG32-**-P*-B
CA01COM-PG36-**-P*-B
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B
Thread
PG9
PG9
PG11
PG13,5
PG13,5
PG13,5
PG16
PG16
PG16
PG21
PG29
PG29
C
max
18
19
22
24
24
25
27
27
27
32
41
41
D
+0,4
18,2
18,2
18,2
18,2
18,2
23,05
23,05
23,05
23,05
24,05
24,05
24,05
E
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
F
max
56
56
56
58
66
73
74
77
77
78
78
89
G
max
25,2
27,8
29,8
32,3
32,3
34,8
37,8
41,1
44,6
50,9
57,1
63,6
H
± 0,2
20,6
23,8
25,4
28,6
28,6
31,7
34,9
38,1
41,3
47,6
54,0
60,6
CA01COM-PG
with threaded coupling
CA01COM-PG is a cable connecting
plug for usage of PG terminations.
It mates with plugs CA06COM and
CA08COM.
Part No.
Pin Insert*
CA01COM-PG10SL-**-P*
CA01COM-PG12S-**-P*
CA01COM-PG14S-**-P*
CA01COM-PG16S-**-P*
CA01COM-PG16-**-P*
CA01COM-PG18-**-P*
CA01COM-PG20-**-P*
CA01COM-PG22-**-P*
CA01COM-PG24-**-P*
CA01COM-PG28-**-P*
CA01COM-PG32-**-P*
CA01COM-PG36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B
Thread
PG9
PG9
PG11
PG13,5
PG13,5
PG13,5
PG16
PG16
PG16
PG21
PG29
PG29
C
max
18
19
22
24
24
25
27
27
27
32
41
41
D
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
E
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
F
max
52
52
52
54
64
69
70
73
74
74
76
87
G
max
21,8
25,0
28,2
31,4
31,4
34,5
37,7
40,9
43,8
50,4
56,8
63,1
H
max
16,2
19,4
22,5
25,7
25,7
28,9
32,1
35,2
38,4
44,8
51,1
57,5
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
All dimensions are in mm
Subject to changes
16
#1171_CA-COM_englisch_250900
16
18.10.2000, 8:21 Uhr
CA-COM
Cable connecting plug, Class E
CA01COM-E-B
with bayonet coupling
CA01COM-E-B is a cable connecting
plug with endbell and cable clamp.
It mates with plugs CA06COM-B
and CA08COM-B.
Part No.
Pin insert*
CA01COM-E10SL-**-P*-B
CA01COM-E-12S**-P*-B
CA01COM-E14S-**-P*-B
CA01COM-E16S-**-P*-B
CA01COM-E16-**-P*-B
CA01COM-E18-**-P*-B
CA01COM-E20-**-P*-B
CA01COM-E22**-P*-B
CA01COM-E24-**-P*-B
CA01COM-E28-**-P*-B
CA01COM-E32-**-P*-B
CA01COM-E36-**-P*-B
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B1)
C
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
D
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
E
max
57
57
59
60
68
72
72
72
78
79
78
78
F
max
25,2
27,8
29,8
32,3
32,3
34,8
37,8
41,1
44,6
50,9
57,1
63,6
G
± 0,2
20,6
23,8
25,4
28,6
28,6
31,7
34,9
38,1
41,3
47,6
54,0
60,6
CA01COM-E
with threaded coupling
CA01COM-E is a cable connecting
plug with endbell and cable clamp.
It mates with plugs CA06COM
and CA08COM.
Part No.
Pin Insert*
CA01COM-E10SL-**-P*
CA01COM-E12S-**-P*
CA01COM-E14S-**-P*
CA01COM-E16S-**-P*
CA01COM-E16-**-P*
CA01COM-E18-**-P*
CA01COM-E20-**-P*
CA01COM-E22-**-P*
CA01COM-E24-**-P*
CA01COM-E28-**-P*
CA01COM-E32-**-P*
CA01COM-E36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B1)
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
C
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
D
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
E
max
53
53
55
56
66
68
68
68
76
76
76
76
F
max
21,8
25,0
28,2
31,4
31,4
34,5
37,3
40,9
43,8
50,4
56,8
63,1
G
max
16,2
19,4
22,5
25,7
25,7
28,9
32,1
35,2
38,4
44,8
51,1
57,5
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
17
#1171_CA-COM_englisch_250900
17
18.10.2000, 8:21 Uhr
CA-COM
Cable connecting plug, Class E
CA01COM-E-B/-03/-06
with bayonet coupling
CA01COM-E-B/-03/-06 is a cable
connecting plug with endbell
(wire sealing) for heat shrink
boots. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin insert*
CA01COM-E10SL-**-P*-BCA01COM-E12S-**-P*-BCA01COM-E14S-**-P*-BCA01COM-E16S-**-P*-BCA01COM-E16-**-P*-BCA01COM-E18-**-P*-BCA01COM-E20-**-P*-BCA01COM-E22-**-P*-BCA01COM-E24-**-P*-BCA01COM-E28-**-P*-BCA01COM-E32-**-P*-BCA01COM-E36-**-P*-B-
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
C
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D 1)
7,7
7,9
10,6
13,5
13,5
14,6
18,7
20,8
24,6
27,0
33,3
38,5
E
max
13,3
13,3
17,0
21,9
21,9
21,9
26,2
26,2
34,5
34,5
43,6
43,6
F
± 0,2
15,5
15,5
19,1
23,9
23,9
23,9
29,6
29,6
37,8
37,8
47,8
47,8
G
± 0,5
11,7
11,7
11,7
11,7
11,5
11,5
12,7
12,7
12,7
12,7
15,2
15,2
H
max
53
53
53
53
61
62
64
64
64
66
69
70
I
max
25,2
27,8
29,8
32,3
32,3
34,8
37,8
41,1
44,6
50,9
57,1
63,6
K
± 0,2
20,6
23,8
25,4
28,6
28,6
31,7
34,9
38,1
41,3
47,6
54,0
60,6
CA01COM-E-DN
with threaded coupling
CA01COM-E-DN is a cable
connecting plug with endbell
(wire sealing) for heat shrink
boots. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin insert*
CA01COM-E10SL-**-P*-DN
CA01COM-E12S-**-P*-DN
CA01COM-E14S-**-P*-DN
CA01COM-E16S-**-P*-DN
CA01COM-E16-**-P*-DN
CA01COM-E18-**-P*-DN
CA01COM-E20-**-P*-DN
CA01COM-E22-**-P*-DN
CA01COM-E24-**-P*-DN
CA01COM-E28-**-P*-DN
CA01COM-E32-**-P*-DN
CA01COM-E36-**-P*-DN
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B
± 0,3
14,2
14,2
14,2
14,1
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
C
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D1)
max
7,7
7,9
10,6
13,5
13,5
14,6
18,7
20,8
24,6
27,0
33,3
38,5
E
± 0,2
13,3
13,3
17,0
21,9
21,9
21,9
26,2
26,2
34,5
34,5
43,6
43,6
F
± 0,5
15,5
15,5
19,1
23,9
23,9
23,9
29,6
29,6
37,8
37,8
47,8
47,8
G
max
11,7
11,7
11,7
11,7
11,5
11,5
12,7
12,7
12,7
12,7
15,2
15,2
H
max
49
49
49
49
58
58
60
60
63
63
67
68
I
max
21,8
25,0
28,2
31,4
31,4
34,5
37,7
40,9
43,8
50,4
56,8
63,1
K
± 0,2
16,2
19,4
22,5
25,7
25,7
28,9
32,1
35,2
38,4
44,8
51,1
57,5
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
All dimensions are in mm
Subject to changes
18
#1171_CA-COM_englisch_250900
18
18.10.2000, 8:21 Uhr
CA-COM
Cable connecting plug, Class F
CA01COM-F-B
with bayonet coupling
CA01COM-F-B is a cable
connecting plug for flex tube.
It mates with plugs CA06COM-B
and CA08COM-B.
Part No.
Pin Insert*
CA01COM-F10SL-**-P*-B
CA01COM-F12S-**-P*-B
CA01COM-F14S-**-P*-B
CA01COM-F16S-**-P*-B
CA01COM-F16-**-P*-B
CA01COM-F18-**-P*-B
CA01COM-F20-**-P*-B
CA01COM-F22-**-P*-B
CA01COM-F24-**-P*-B
CA01COM-F28-**-P*-B
CA01COM-F32-**-P*-B
CA01COM-F36-**-P*-B
A
–0,15
18,2
18,2
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B1)
8,2
8,2
11,1
14,3
14,3
16,7
19,8
19,8
25,4
27,0
32,5
35,7
C
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF
1-7/16-18UNEF
1-3/4-18UNS-2A
2-18UNS-2A
D
min
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
11,0
11,8
E
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
32,05
32,05
23,05
24,05
24,05
24,05
F
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
G
max
50
50
50
50
57
59
59
62
62
64
64
66
H
max
25,2
27,8
29,8
32,3
32,3
34,8
37,8
41,1
44,6
50,9
57,1
63,6
I
± 0,2
20,6
23,8
25,4
28,6
28,6
31,7
34,9
38,1
41,3
47,6
54,0
60,6
D
min
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
11,0
11,8
E
+0,4
14,2
14,2
14,2
14,2
14,2
19,0
19,0
20,6
20,6
20,6
22,2
22,2
F
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
G
max
45
45
45
45
54
54
55
58
59
60
62
64
H
max
21,8
25,0
28,2
31,4
31,4
34,5
37,7
40,9
43,8
50,4
56,8
63,1
I
max
16,2
19,4
22,5
25,7
25,7
28,9
32,1
35,2
38,4
44,8
51,1
57,5
CA01COM-F
with threaded coupling
CA01COM-F is a cable
connecting plug for flex tube.
It mates with plugs CA06COM
and CA08COM.
Part No.
Pin Insert*
CA01COM-F10SL-**-P*
CA01COM-F12S-**-P*
CA01COM-F14S-**-P*
CA01COM-F16S-**-P*
CA01COM-F16-**-P*
CA01COM-F18-**-P*
CA01COM-F20-**-P*
CA01COM-F22-**-P*
CA01COM-F24-**-P*
CA01COM-F28-**-P*
CA01COM-F32-**-P*
CA01COM-F36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
B1)
8,2
8,2
11,1
14,3
14,3
16,7
19,8
19,8
25,4
27,0
32,5
35,7
C
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF-2A
1-7/16-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
19
#1171_CA-COM_englisch_250900
19
18.10.2000, 8:21 Uhr
CA-COM
Box mounting receptacle, Class E
CA02COM-E-B
with bayonet coupling
CA02COM-E-B is a box mounting
receptacle for front panel
mounting. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin Insert*
CA02COM-E10SL-**-P*-B
CA02COM-E12S-**-P*-B
CA02COM-E14S-**-P*-B
CA02COM-E16S-**-P*-B
CA02COM-E16-**-P*-B
CA02COM-E18-**-P*-B
CA02COM-E20-**-P*-B
CA02COM-E22-**-P*-B
CA02COM-E24-**-P*-B
CA02COM-E28-**-P*-B
CA02COM-E32-**-P*-B
CA02COM-E36-**-P*-B
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
C
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4.0
4,0
4,0
4,0
4,0
4,0
D
± 0,3
24,7
24,7
24,7
24,7
33,8
33,8
33,8
33,8
33,8
33,8
33,8
33,8
E
max
16,2
16,2
19,2
22,4
22,4
25,6
29,0
32,2
35,3
41,4
47,8
52,6
F
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
H13
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,7
3,7
4,3
4,3
X / Contact size
15
25
13,6
13,2
13,2
13,2
17,9
17,9
17,1
17,1
17,1
17,1
17,1
17,1
15,5
15,5
15,5
15,5
13,9
15,5
13,9
15,5
100
19,5
18,7
18,7
18,7
17,1
17,1
15,5
15,5
CA02COM-E
with threaded coupling
CA02COM-E is a box mounting
receptacle for front panel
mounting. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin Insert*
CA02COM-E10SL-**-P*
CA02COM-E12S-**-P*
CA02COM-E14S-**-P*
CA02COM-E16S-**-P*
CA02COM-E16-**-P*
CA02COM-E18-**-P*
CA02COM-E20-**-P*
CA02COM-E22-**-P*
CA02COM-E24-**-P*
CA02COM-E28-**-P*
CA02COM-E32-**-P*
CA02COM-E36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNEF-2A
2-18UNS-2A
2-1/4-16UN-2A
B
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
C
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D
max
25,1
25,1
25,1
25,1
34,2
34,2
34,2
34,2
34,2
34,2
34,2
34,2
E
max
15,9
15,9
19,0
22,2
22,2
25,4
29,0
32,2
35,3
41,2
47,6
52,4
F
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
+0,2
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,7
3,7
4,4
4,4
X / Contact size
15
25
13,6
13,2
13,2
13,2
17,9
17,9
17,1
17,1
17,1
17,1
17,1
17,1
15,5
15,5
15,5
15,5
13,9
13,9
13,9
13,9
100
19,5
18,7
18,7
18,7
17,1
17,1
15,5
15,5
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
All dimensions are in mm
Subject to changes
20
#1171_CA-COM_englisch_250900
20
18.10.2000, 8:21 Uhr
CA-COM
Box mounting receptacle, Class E
CA20COM-E-B
with bayonet coupling
CA20COM-E-B is a box mounting
receptacle for rear panel
mounting. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin Insert*
CA20COM-E10SL-**-P*-B
CA20COM-E12S-**-P*-B
CA20COM-E14S-**-P*-B
CA20COM-E16S-**-P*-B
CA20COM-E16-**-P*-B
CA20COM-E18-**-P*-B
CA20COM-E20-**-P*-B
CA20COM-E22-**-P*-B
CA20COM-E24-**-P*-B
CA20COM-E28-**-P*-B
CA20COM-E32-**-P*-B
CA20COM-E36-**-P*-B
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
C
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D
± 0,3
24,7
24,7
24,7
24,7
33,8
33,8
33,8
33,8
33,8
33,8
33,8
33,8
E
max
16,2
16,2
19,2
22,4
22,4
25,6
29,0
32,2
35,3
41,4
47,8
54,1
F
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
CA20COM-E
with threaded coupling
CA20COM-E is a box mounting
receptacle for rear panel
mounting. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin insert*
A
Thread
B
+0,4
C
± 0,3
D
max
E
max
F
± 0,1
G
± 0,3
CA20COM-E10SL-**-P*
CA20COM-E12S-**-P*
CA20COM-E14S-**-P*
CA20COM-E16S-**-P*
CA20COM-E16-**-P*
CA20COM-E18-**-P*
CA20COM-E20-**-P*
CA20COM-E22-**-P*
CA20COM-E24-**-P*
CA20COM-E28-**-P*
CA20COM-E32-**-P*
CA20COM-E36-**-P*
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNEF-2A
2-18UNS-2A
2-1/4-16UN-2A
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
24,05
24,05
24,05
24,05
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
25,1
25,1
25,1
25,1
34,2
34,2
34,2
34,2
34,2
34,2
34,2
34,2
14,5
16,1
19,2
22,4
22,4
25,6
29,0
32,2
35,3
41,4
47,8
54,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
H13
Std
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,7
3,7
4,4
4,4
BM29
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M6
M6
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
21
#1171_CA-COM_englisch_250900
21
18.10.2000, 8:22 Uhr
CA-COM
Box mounting receptacle, Class L, with pcb termination
CA02COM-L-B
with bayonet coupling
CA02COM-L-B is a box mounting
receptacle for front panel
mounting. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin Insert*
CA02COM-L10SL-**-P*-B
CA02COM-L12S-**-P*-B
CA02COM-L14S-**-P*-B
CA02COM-L16S-**-P*-B
CA02COM-L16-**-P*-B
CA02COM-L18-**-P*-B
CA02COM-L20-**-P*-B
CA02COM-L22-**-P*-B
CA02COM-L24-**-P*-B
CA02COM-L28-**-P*-B
CA02COM-L32-**-P*-B
CA02COM-L36-**-P*-B
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
C
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4.0
4,0
4,0
4,0
4,0
4,0
D
± 0,3
24,7
24,7
24,7
24,7
33,8
33,8
33,8
33,8
33,8
33,8
33,8
33,8
E
max
16,2
16,2
19,2
22,4
22,4
25,6
29,0
32,2
35,3
41,4
47,8
52,6
F
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
H13
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,7
3,7
4,3
4,3
CA02COM-L
with threaded coupling
CA02COM-L is a box mounting
receptacle for front panel
mounting. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin Insert*
CA02COM-L10SL-**-P*
CA02COM-L12S-**-P*
CA02COM-L14S-**-P*
CA02COM-L16S-**-P*
CA02COM-L16-**-P*
CA02COM-L18-**-P*
CA02COM-L20-**-P*
CA02COM-L22-**-P*
CA02COM-L24-**-P*
CA02COM-L28-**-P*
CA02COM-L32-**-P*
CA02COM-L36-**-P*
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNEF-2A
2-18UNS-2A
2-1/4-16UN-2A
B
+0,4
14,2
14,2
14,2
14,2
19,0
19,0
19,0
19,0
20,6
20,6
22,2
22,2
C
± 0,3
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D
max
25,1
25,1
25,1
25,1
34,2
34,2
34,2
34,2
34,2
34,2
34,2
34,2
E
max
15,9
15,9
19,0
22,2
22,2
25,4
29,0
32,2
35,3
41,2
47,6
52,4
F
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
+0,2/–0,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,7
3,7
4,4
4,4
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
All dimensions are in mm
Subject to changes
22
#1171_CA-COM_englisch_250900
22
18.10.2000, 8:22 Uhr
CA-COM
Box mounting receptacle, Class L, with pcb termination
CA20COM-L-B
with bayonet coupling
CA20COM-L-B is a box mounting
receptacle for rear panel
mounting. It mates with plugs
CA06COM-B and CA08COM-B.
Part No.
Pin Insert*
CA20COM-L10SL-**-P*-B
CA20COM-L12S-**-P*-B
CA20COM-L14S-**-P*-B
CA20COM-L16S-**-P*-B
CA20COM-L16-**-P*-B
CA20COM-L18-**-P*-B
CA20COM-L20-**-P*-B
CA20COM-L22-**-P*-B
CA20COM-L24-**-P*-B
CA20COM-L28-**-P*-B
CA20COM-L32-**-P*-B
CA20COM-L36-**-P*-B
A
–0,15
18,2
21,4
24,6
27,4
27,4
30,8
34,2
37,4
40,9
46,7
53,4
59,6
B
+0,4
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
23,05
24,05
24,05
24,05
C
± 0,2
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
D
± 0,3
24,7
24,7
24,7
24,7
33,8
33,8
33,8
33,8
33,8
33,8
33,8
33,8
E
max
16,2
16,2
19,2
22,4
22,4
25,6
29,0
32,2
35,3
41,4
47,8
54,1
F
± 0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
G
± 0,3
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
CA20COM-L
with threaded coupling
CA20COM-L is a box mounting
receptacle for rear panel
mounting. It mates with plugs
CA06COM and CA08COM.
Part No.
Pin insert*
A
Thread
B
+0,4
C
± 0,3
D
max
E
max
F
± 0,1
G
± 0,3
CA20COM-L10SL-**-P*
CA20COM-L12S-**-P*
CA20COM-L14S-**-P*
CA20COM-L16S-**-P*
CA20COM-L16-**-P*
CA20COM-L18-**-P*
CA20COM-L20-**-P*
CA20COM-L22-**-P*
CA20COM-L24-**-P*
CA20COM-L28-**-P*
CA20COM-L32-**-P*
CA20COM-L36-**-P*
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNEF-2A
2-18UNS-2A
2-1/4-16UN-2A
18,2
18,2
18,2
18,2
21,5
23,05
23,05
23,05
24,05
24,05
24,05
24,05
2,8
3,2
3,2
3,2
3,2
4,0
4,0
4,0
4,0
4,0
4,0
4,0
25,1
25,1
25,1
25,1
34,2
34,2
34,2
34,2
34,2
34,2
34,2
34,2
14,5
16,1
19,2
22,4
22,4
25,6
29,0
32,2
35,3
41,4
47,8
54,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
25,4
28,0
30,0
32,5
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
H
H13
Std
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,7
3,7
4,4
4,4
BM29
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M6
M6
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
23
#1171_CA-COM_englisch_250900
23
18.10.2000, 8:22 Uhr
CA-COM
Straight plug, Class PG
CA06COM-PG-B
with bayonet coupling
CA06COM-PG-B is a straight plug
for usage of PG terminations.
It mates with receptacles
CA00COM-B, CA01COM-B and
CA02COM-E-B.
Part No.
Pin Insert*
CA06COM-PG10SL-**-P*-B
CA06COM-PG12S-**-P*-B
CA06COM-PG14S-**-P*-B
CA06COM-PG16S-**-P*-B
CA06COM-PG16-**-P*-B
CA06COM-PG18-**-P*-B
CA06COM-PG20-**-P*-B
CA06COM-PG22-**-P*-B
CA06COM-PG24-**-P*-B
CA06COM-PG28-**-P*-B
CA06COM-PG32-**-P*-B
CA06COM-PG36-**-P*-B
A
max
22,8
26,0
29,2
32,0
32,0
36,5
39,9
43,1
46,6
53,4
60,1
66,3
B
Thread
PG9
PG9
PG11
PG13,5
PG13,5
PG13,5
PG16
PG16
PG16
PG21
PG29
PG29
C
max
18
19
22
24
24
25
27
27
27
32
41
41
D
max
52
52
52
54
64
69
70
73
74
74
76
87
CA06COM-PG
with threaded coupling
CA06COM-PG is a straight plug
for usage of PG terminations.
It mates with receptacles
CA00COM, CA01COM and
CA02COM-E.
Part No.
Pin Insert*
CA06COM-PG10SL-**-P*
CA06COM-PG12S-**-P*
CA06COM-PG14S-**-P*
CA06COM-PG16S-**-P*
CA06COM-PG16-**-P*
CA06COM-PG18-**-P*
CA06COM-PG20-**-P*
CA06COM-PG22-**-P*
CA06COM-PG24-**-P*
CA06COM-PG28-**-P*
CA06COM-PG32-**-P*
CA06COM-PG36-**-P*
A
max
24,1
25,8
28,8
31,8
31,8
34,1
37,4
40,5
43,8
50,2
56,4
62,8
B
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
C
Thread
PG9
PG9
PG11
PG13,5
PG13,5
PG13,5
PG16
PG16
PG16
PG21
PG29
PG29
D
max
18
19
22
24
24
25
27
27
27
32
41
41
E
max
52
52
52
54
64
69
70
73
74
74
76
87
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
All dimensions are in mm
Subject to changes
24
#1171_CA-COM_englisch_250900
24
18.10.2000, 8:22 Uhr
CA-COM
Straight plug, Class E
CA06COM-E-B
with bayonet coupling
CA06COM-E-B is a straight plug with
endbell and cable clamp. It mates
with receptacles CA00COM-B,
CA01COM-B and CA02COM-E-B.
Part No.
Pin Insert*
CA06COM-E10SL-**-P*-B
CA06COM-E12S-**-P*-B
CA06COM-E14S-**-P*-B
CA06COM-E16S-**-P*-B
CA06COM-E16-**-P*-B
CA06COM-E18-**-P*-B
CA06COM-E20-**-P*-B
CA06COM-E22-**-P*-B
CA06COM-E24-**-P*-B
CA06COM-E28-**-P*-B
CA06COM-E32-**-P*-B
CA06COM-E36-**-P*-B
B1)
A
max
22,8
26,0
29,2
32,0
32,0
36,5
39,9
43,1
46,6
53,4
60,1
66,3
C
max
53
53
55
56
66
68
68
68
76
76
76
76
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
CA06COM-E
with threaded coupling
CA06COM-E is a straight plug with
endbell and cable clamp. It mates
with receptacles CA00COM,
CA01COM and CA02COM-E.
Part No.
Pin insert*
CA06COM-E10SL-**-P*
CA06COM-E12S-**-P*
CA06COM-E14S-**-P*
CA06COM-E16S-**-P*
CA06COM-E16-**-P*
CA06COM-E18-**-P*
CA06COM-E20-**-P*
CA06COM-E22-**-P*
CA06COM-E24-**-P*
CA06COM-E28-**-P*
CA06COM-E32-**-P*
CA06COM-E36-**-P*
A
max
24,1
25,8
28,8
31,8
31,8
34,1
37,4
40,5
43,8
50,2
56,4
62,8
B
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
C 1)
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
D
max
53
53
55
56
66
68
68
68
76
76
76
76
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
25
#1171_CA-COM_englisch_250900
25
18.10.2000, 8:22 Uhr
CA-COM
Straight plug, Class F
CA06COM-F-B
with bayonet coupling
CA06COM-F-B is a straight plug
with endbell for flex tubes. It mates
with receptacles CA00COM-B,
CA01COM-B and CA02COM-E-B.
Part No.
Pin Insert*
CA06COM-F10SL-**-P*-B
CA06COM-F12S-**-P*-B
CA06COM-F14S-**-P*-B
CA06COM-F16S-**-P*-B
CA06COM-F16-**-P*-B
CA06COM-F18-**-P*-B
CA06COM-F20-**-P*-B
CA06COM-F22-**-P*-B
CA06COM-F24-**-P*-B
CA06COM-F28-**-P*-B
CA06COM-F32-**-P*-B
CA06COM-F36-**-P*-B
B1)
A
max
22,8
26,0
29,2
32,0
32,0
36,5
39,9
43,1
46,6
53,4
60,1
66,3
C
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF-2A
1-7/16-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
8,2
8,2
11,1
14,3
14,3
16,7
19,8
19,8
25,4
27,0
32,5
35,7
D
min
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
11,0
11,8
E
max
45
45
45
45
54
54
55
58
59
60
62
64
CA06COM-F
with threaded coupling
CA06COM-F is a straight plug with
endbell for flex tubes. It mates with
receptacles CA00COM, CA01COM
and CA02COM-E.
Part No.
Pin Insert*
CA06COM-F10SL-**-P*
CA06COM-F12S-**-P*
CA06COM-F14S-**-P*
CA06COM-F16S-**-P*
CA06COM-F16-**-P*
CA06COM-F18-**-P*
CA06COM-F20-**-P*
CA06COM-F22-**-P*
CA06COM-F24-**-P*
CA06COM-F28-**-P*
CA06COM-F32-**-P*
CA06COM-F36-**-P*
A
max
24,1
25,8
28,8
31,8
31,8
34,1
37,4
40,5
43,8
50,2
56,4
62,8
B
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
C1)
8,2
8,2
11,1
14,3
14,3
16,7
19,8
19,8
25,4
27,0
32,5
35,7
D
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF
7/8-20UNEF
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF-2A
1-7/16-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
E
min
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
9,5
11,0
11,8
F
max
45
45
45
45
54
54
55
58
59
60
62
64
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
All dimensions are in mm
Subject to changes
26
#1171_CA-COM_englisch_250900
26
18.10.2000, 8:22 Uhr
CA-COM
Straight plug, Class E
CA06COM-E-B/-03/-06
with bayonet coupling
CA06COM-E-B/-03/-06 is a straight
plug with endbell (wire sealing) for
heat shrink boots. It mates with
receptacles CA00COM-B,
CA01COM-B and CA02COM-E-B.
Part No.
Pin Insert*
CA06COM-E10SL-**-P*-BCA06COM-E12S-**-P*-BCA06COM-E14S-**-P*-BCA06COM-E16S-**-P*-BCA06COM-E16-**-P*-BCA06COM-E18-**-P*-BCA06COM-E20-**-P*-BCA06COM-E22-**-P*-BCA06COM-E24-**-P*-BCA06COM-E28-**-P*-BCA06COM-E32-**-P*-BCA06COM-E36-**-P*-B-
B1)
A
max
22,8
26,0
29,2
32,0
32,0
36,5
39,9
43,1
46,6
53,4
60,1
66,3
C
max
13,3
13,3
17,0
21,9
21,9
21,9
26,2
26,2
34,5
34,5
43,6
43,6
7,7
7,9
10,6
13,5
13,5
14,6
18,7
20,8
24,6
27,0
33,3
38,5
D
± 0,2
15,5
15,5
19,1
23,9
23,9
23,9
29,6
29,6
37,8
37,8
47,8
47,8
E
± 0,5
11,7
11,7
11,7
11,7
11,5
11,5
12,7
12,7
12,7
12,7
15,2
15,2
F
max
49
49
49
49
58
58
60
60
63
63
67
68
CA06COM-E-DN
with threaded coupling
CA06COM-E-DN is a straight
plug with endbell (wire sealing) for
heat shrink boots. It mates with
receptacles CA00COM, CA01COM
and CA02COM-E.
Part No.
Pin Insert*
CA06COM-E10SL-**-P*-DN
CA06COM-E12S-**-P*-DN
CA06COM-E14S-**-P*-DN
CA06COM-E16S-**-P*-DN
CA06COM-E16-**-P*-DN
CA06COM-E18-**-P*-DN
CA06COM-E20-**-P*-DN
CA06COM-E22-**-P*-DN
CA06COM-E24-**-P*-DN
CA06COM-E28-**-P*-DN
CA06COM-E32-**-P*-DN
CA06COM-E36-**-P*-DN
A
max
24,1
25,8
28,8
31,8
31,8
34,1
37,4
40,5
43,8
50,2
56,4
62,8
B
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
C1)
7,7
7,9
10,6
13,5
13,5
14,6
18,7
20,8
24,6
27,0
33,3
38,5
D
max
13,3
13,3
17,0
21,9
21,9
21,9
26,2
26,2
34,5
34,5
43,6
43,6
E
± 0,2
15,5
15,5
19,1
23,9
23,9
23,9
29,6
29,6
37,8
37,8
47,8
47,8
F
± 0,5
11,7
11,7
11,7
11,7
11,5
11,5
12,7
12,7
12,7
12,7
15,2
15,2
G
max
49
49
49
49
58
58
60
60
63
63
67
68
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
27
#1171_CA-COM_englisch_250900
27
18.10.2000, 8:22 Uhr
CA-COM
Staright plug, Class IN
CA06COM-IN-B
with bayonet coupling
CA06COM-IN-B is a straight plug with
universal endbell. It mates with
receptacles CA00COM-B, CA01COM-B
and CA02COM-E-B.
Part No.
Pin Insert*
CA06COM-IN10SL-**-P*-B
CA06COM-IN14S-**-P*-B
CA06COM-IN20-**-P*-B
CA06COM-IN22-**-P*-B
A
24,1
28,8
37,4
40,5
B
max
84
85
92
96
E
max
18
18
24
34
D
Cable sealing area
D07 = 4,5 – 7,2 mm
D07 = 4,5 – 7,2 mm
D11 = 7,0 – 11,2 mm
D17 = 14,5 – 17,5 mm
E
max
18
18
24
34
D
Cable sealing area
D07 = 4,5 – 7,2 mm
D07 = 4,5 – 7,2 mm
D11 = 7,0 – 11,2 mm
D17 = 14,5 – 17,5 mm
CA06COM-IN
with threaded coupling
CA06COM-IN is a straight plug with
universal endbell. It mates with
receptacles CA00COM, CA01COM and
CA02COM-E.
Part No.
Pin Insert*
CA06COM-IN10SL-**-P*
CA06COM-IN14S-**-P*
CA06COM-IN20-**-P*
CA06COM-IN22-**-P*
A
24,1
28,8
37,4
40,5
B
max
84
85
92
96
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
All dimensions are in mm
Subject to changes
28
#1171_CA-COM_englisch_250900
28
18.10.2000, 8:22 Uhr
CA-COM
90° Plug, Class E
CA08COM-E-B
with bayonet coupling
CA08COM-E-B is a 90° plug with
cable clamp. It mates with
receptacles CA00COM-B,
CA01COM-B and CA02COM-E-B.
Part No.
Pin Insert*
CA08COM-E10SL-**-P*-B
CA08COM-E12S-**-P*-B
CA08COM-E14S-**-P*-B
CA08COM-E16S-**-P*-B
CA08COM-E16-**-P*-B
CA08COM-E18-**-P*-B
CA08COM-E20-**-P*-B
CA08COM-E22-**-P*-B
CA08COM-E24-**-P*-B
CA08COM-E28-**-P*-B
CA08COM-E32-**-P*-B
CA08COM-E36-**-P*-B
B1)
A
max
22,8
26,0
29,2
32,0
32,0
36,5
39,9
43,1
46,6
53,4
60,1
66,3
C
max
22,7
22,7
27,5
30,0
30,0
33,0
37,5
37,5
43,3
43,3
51,7
58,0
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
D
max
42
42
42
45
45
53
53
53
58
58
66
69
E
max
45
45
47
48
48
58
61
61
66
66
72
75
CA08COM-E
with threaded coupling
CA08COM-E is a 90° plug with
cable clamp. It mates with
receptacles CA00COM, CA01COM
and CA02COM-E.
Part No.
Pin Insert*
CA08COM-E10SL-**-P*
CA08COM-E12S-**-P*
CA08COM-E14S-**-P*
CA08COM-E16S-**-P*
CA08COM-E16-**-P*
CA08COM-E18-**-P*
CA08COM-E20-**-P*
CA08COM-E22-**-P*
CA08COM-E24-**-P*
CA08COM-E28-**-P*
CA08COM-E32-**-P*
CA08COM-E36-**-P*
A
max
24,1
25,8
28,8
31,8
31,8
34,1
37,4
40,5
43,8
50,2
56,4
62,8
B
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF
1-20UNEF
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
C1)
7,9
7,9
11,1
14,2
14,2
15,8
19,0
19,0
23,7
23,7
31,8
34,6
D
max
22,7
22,7
27,5
30,0
30,0
32,2
37,5
37,5
43,3
43,3
51,7
58,0
E
max
42
42
42
45
45
53
53
53
58
58
66
69
F
max
45
45
47
48
57
58
61
61
66
66
72
75
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
1
) max cable dia
29
#1171_CA-COM_englisch_250900
29
18.10.2000, 8:22 Uhr
CA-COM
90° Plug, Class F
CA08COM-F-B
with bayonet coupling
CA08COM-F-B is a 90° plug for flex
tubes. It mates with receptacles
CA00COM-B, CA01COM-B and
CA02COM-E-B.
Part No.
Pin Insert*
CA08COM-F10SL-**-P*-B
CA08COM-F12S-**-P*-B
CA08COM-F14S-**-P*-B
CA08COM-F16S-**-P*-B
CA08COM-F16-**-P*-B
CA08COM-F18-**-P*-B
CA08COM-F20-**-P*-B
CA08COM-F22-**-P*-B
CA08COM-F24-**-P*-B
CA08COM-F28-**-P*-B
CA08COM-F32-**-P*-B
CA08COM-F36-**-P*-B
A
max
22,8
26,0
29,2
32,0
32,0
36,5
39,9
43,1
46,6
53,4
60,1
66,3
B
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF-2A
1-7/16-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
C
max
45
45
47
48
57
58
61
61
66
66
72
75
D
max
22,0
22,0
24,0
25,0
25,0
27,0
29,0
30,0
32,0
34,0
39,5
45,0
E
min
9,4
9,4
9,4
9,4
9,4
9,4
9,4
9,4
9,4
9,4
11,0
12,6
CA08COM-F
with threaded coupling
CA08COM-F is a 90° plug for flex
tubes. It mates with receptacles
CA00COM, CA01COM and
CA02COM-E.
Part No.
Pin Insert*
CA08COM-F10SL-**-P*
CA08COM-F12SL-**-P*
CA08COM-F14S-**-P*
CA08COM-F16S-**-P*
CA08COM-F16-**-P*
CA08COM-F18-**-P*
CA08COM-F20-**-P*
CA08COM-F22-**-P*
CA08COM-F24-**-P*
CA08COM-F28-**-P*
CA08COM-F32-**-P*
CA08COM-F36-**-P*
A
max
24,1
25,8
28,8
31,8
31,8
34,1
37,4
40,5
43,8
50,2
56,4
62,8
B
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
C
Thread
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-3/16-18UNEF-2A
1-3/16-18UNEF-2A
1-7/16-18UNEF-2A
1-7/16-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
D
max
45
45
47
48
57
58
61
61
66
66
72
75
E
max
22,0
22,0
24,0
25,0
25,0
27,0
29,0
30,0
32,0
34,0
39,5
45,0
F
min
9,4
9,4
9,4
9,4
9,4
9,4
9,4
9,4
9,4
9,4
11,0
12,6
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
All dimensions are in mm
Subject to changes
30
#1171_CA-COM_englisch_250900
30
18.10.2000, 8:22 Uhr
CA-COM
90° Plug, Class PG
CA08COM-PG-B
with bayonet coupling
CA08COM-PG-B designates a 90°
plug for usage of PG terminations.
It mates with receptacles
CA01COM-B and CA02COM-B.
Part No.
Pin insert*
CA08COM-PG10SL-**P*-B
CA08COM-PG12S-**P*-B
CA08COM-PG14S-**P*-B
CA08COM-PG16S-**P*-B
CA08COM-PG16-**P*-B
CA08COM-PG18-**P*-B
CA08COM-PG20-**P*-B
CA08COM-PG22-**P*-B
A
max
22,8
26,0
29,2
32,0
32,0
36,5
39,9
43,1
B
–0,3
11,3
14,0
17,1
20,4
20,4
23,6
26,7
29,8
C
max
57
57
59
63
72
77
82
82
D
E
18,5
18,5
19,5
22,0
22,0
26,3
29,0
29,5
PG9
PG9
PG11
PG13,5
PG13,5
PG16
PG21
PG21
CA08COM-PG
with threaded coupling
CA08COM-PG designates a 90°
plug for usage of PG terminations.
It mates with receptacles
CA01COM and CA02COM.
Part No.
Pin insert*
CA08COM-PG10SL-**P*
CA08COM-PG12S-**P*
CA08COM-PG14S-**P*
CA08COM-PG16S-**P*
CA08COM-PG16-**P*
CA08COM-PG18-**P*
CA08COM-PG20-**P*
CA08COM-PG22-**P*
A
max
24,1
25,8
28,8
31,8
31,8
34,1
37,4
40,5
B
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
C
max
57
57
59
63
72
77
82
82
D
E
18,5
18,5
19,5
22,0
22,0
26,3
29,0
29,5
PG9
PG9
PG11
PG13,5
PG13,5
PG16
PG21
PG21
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
31
#1171_CA-COM_englisch_250900
31
18.10.2000, 8:23 Uhr
CA-COM
90° Plug, Class IN
CA08COM-IN-B
with bayonet coupling
CA08COM-IN-B is a 90° plug with
universal endbell. It mates with
receptacles CA00COM-B,
CA01COM-B and CA02COM-E-B.
Part No.
Pin Insert*
CA08COM-IN10SL-**P*-B-***-D07
CA08COM-IN20-**P*-B-***-D11
A
24,1
37,4
B
max
52
62
C
max
78
86
D
Cable sealing area
D07 = 4,5 – 7,2 mm
D11 = 7,0 – 11,2
E
max
18
24
C
max
78
86
D
Cable sealing area
D07 = 4,5 – 7,2 mm
D11 = 7,0 – 11,2
E
max
18
24
CA08COM-IN
with threaded coupling
CA08COM-IN is a 90° plug with
universal endbell. It mates with
receptacles CA00COM, CA01COM
and CA02COM-E.
Part No.
Pin Insert*
CA08COM-IN10SL-**P*-***-D07
CA08COM-IN20-**P*-***-D11
A
24,1
37,4
B
max
52
62
* For socket inserts substitute “S” for “P”
** Add contact arrangement number (see pages 6 – 8)
*** 01 Crimp contact
All dimensions are in mm
Subject to changes
32
#1171_CA-COM_englisch_250900
32
18.10.2000, 8:23 Uhr
CA-COM
Accessories
Protective caps
for receptacles with bayonet
coupling
CA00COM-B, CA02COM-E-B and
CA20COM-E-B
Part No.
Shell size
CA120003-1701
CA120003-1702
CA120003-1703
CA121003-1704
CA121003-1705
CA121003-1706
CA121003-1707
CA121003-1708
CA121003-1709
CA121003-1710
CA121003-1711
CA121003-1712
10 SL
12S
14S
16S
16
18
20
22
24
28
32
36
B
± 0,3
19,5
19,5
19,5
19,5
24.5
24,5
24,5
24,5
24,5
24,5
24,5
24,5
D
max
22,4
25,6
28,8
31,6
31,6
35,7
39,1
42,3
45,8
51,6
58,3
64,5
L
± 0,25
107
107
107
107
120
120
134
134
134
176
176
176
T
+0,25
4,3
4,3
4,3
4,3
4,3
4,3
4,3
4,3
4,3
5,5
5,5
5,5
Protective caps
for receptacles with threaded
coupling
CA00COM, CA02COM-E and
CA20COM
Part No.
Shell size
CA121003-1601
CA121003-1602
CA121003-1603
CA121003-1604
CA121003-1606
CA121003-1607
CA121003-1608
CA121003-1609
CA121003-1610
CA121003-1611
CA121003-1612
10SL
12S
14S
16S, 16
18
20
22
24
28
32
36
A
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNEF-2B
2-18UNS-2B
2-1/4-16UN-2B
B
max
16,0
16,0
16,0
16,0
16,0
16,0
16,0
16,0
18,0
18,0
18,0
D
max
20,2
23,4
26,6
29,8
32,9
36,1
39,4
42,6
48,9
55,3
61,6
L
max
114
127
127
127
127
141
141
154
214
214
214
T
+0,2
3,6
3,6
3,6
3,6
3,6
3,6
3,6
4,4
4,4
4,8
4,8
33
#1171_CA-COM_englisch_250900
33
18.10.2000, 8:23 Uhr
CA-COM
Accessories
Protective caps
for plugs with bayonet coupling
CA06COM-B and CA08COM-B
Part No.
Shell size
CA121004-1701
CA121004-1702
CA121004-1703
CA121004-1704
CA121004-1705
CA121004-1706
CA121004-1707
CA121004-1708
CA121004-1709
CA121004-1710
CA121004-1711
CA121004-1712
10 SL
12S
14S
16S
16
18
20
22
24
28
32
36
B
max
29,0
29,0
29,0
29,0
37,0
37,0
37,0
37,0
37,0
37,0
37,0
37,0
D
max
20,7
23,9
27,1
29,9
29,9
33,3
36,7
39,9
43,4
49,2
55,9
62,1
L
ca
107
120
120
120
134
134
147
147
147
204
204
204
T
+0,5
4,3
4,3
4,3
4,3
4,3
4,3
4,7
4,7
4,7
4,7
5,5
5,5
Protective caps
for plugs with threaded coupling
CA06COM and CA08COM
Part No.
Shell size
CA121004-1601
CA121004-1602
CA121004-1603
CA121004-1604
CA121004-1606
CA121004-1607
CA121004-1608
CA121004-1609
CA121004-1610
CA121004-1611
CA121004-1612
10SL
12S
14S
16S, 16
18
20
22
24
28
32
36
A
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNEF-2A
2-18UNS-2A
2-1/4-16UN-2A
B
max
20,5
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
D
max
16,7
19,8
23,0
26,2
29,4
32,5
35,7
38,9
45,2
51,6
57,9
L
max
114
127
127
127
127
141
141
154
214
214
214
All dimensions are in mm
Subject to changes
34
#1171_CA-COM_englisch_250900
T
+0,4
4,0
4,0
4,0
4,0
4,0
4,8
4,8
4,8
4,8
5,6
5,6
34
18.10.2000, 8:23 Uhr
CA-COM
Accessories
Cable clamp
without bushing
Part No.
Shell size
CA121051-325
CA121051-326
CA121051-327
CA121051-328
CA121051-329
CA121051-330
CA121051-331
CA121051-332
10SL, 12S
14S
16S, 16
18
20, 22
24, 28
32
36
A
Thread
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-3/16-18UNEF-2B
1-7/16-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
B
max
10,5
10,6
10,5
10,5
10,5
10,5
12,0
13,7
E
max
7,9
11,1
14,2
15,8
19,0
23,7
31,8
34,6
L
max
20,8
22,4
24,0
24,0
24,0
26,4
28,0
29,6
R
max
22,6
27,4
29,8
32,2
37,4
43,5
51,7
57,8
Shell weight
g
13,2
18,0
23,6
27,3
37,2
56,3
83,9
109,8
Telescoping bushing
The telescoping bushing is used together with above cable clamps
CA121051-... It keeps oil, dirt or dust
out of the endbell. Wrapping or
insulating of the wires fed through
the clamp is eliminated since they
are protected by the bushing.
Combinations of bushings may be
used to reduce cable entry diameters for improved sealing.
Material: Polychloroprene
Part No.
Shell size
012-8552-000
012-8554-000
012-0218-000
012-0219-000
012-0220-000
012-8555-000
012-8556-000
012-8557-000
012-8558-000
012-8558-000
012-0223-000
10SL,12S
14S
16S, 16
18
20, 22
24, 28
24, 28
32
32
36
36
C
max
10,0
12,8
18,9
22,1
27,0
27,0
33,5
33,5
40,5
40,5
47,0
L
max
70,4
67,4
63,9
60,6
57,4
57,4
54,4
54,4
51,4
51,4
48,4
R
–0,3
6,7
9,2
11,2
14,4
16,0
16,7
21,6
21,6
26,9
26,9
31,9
S
–0,3
8,1
11,0
14,2
15,8
18,9
21,3
23,7
26,6
31,6
31,6
34,8
35
#1171_CA-COM_englisch_250900
35
18.10.2000, 8:23 Uhr
CA-COM
Gaskets
for CA00COM-B
for CA02COM/CA02COM-B/CA00COM
These sealing gaskets made of neoprene are
used with receptacles with flange for sealing
between the shell and the flange of the receptacle.
Rear panel mounting
Part No.
Shell size
075-8501-000
075-8502-000
075-8503-000
075-8504-000
075-8505-000
075-8506-000
075-8507-000
075-8508-000
075-8509-000
075-8510-000
075-8511-000
10SL
12S
14S
16S, 16
18
20
22
24
28
32
36
A
± 0,1
18,2
20,6
23,0
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
B
+0,2
18,2
21,4
24,6
27,4
30,8
34,2
37,4
40,8
46,7
53,4
59,6
C
± 0,3
25,4
28,0
30,0
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
D
+0,2
4,2
4,2
4,2
4,2
4,2
4,2
4,2
4,2
5,2
5,2
5,2
A
± 0,1
15,7
20,6
23,0
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
B
+0,2
18,2
18,9
22,1
25,3
28,4
31,6
34,8
38,0
44,3
50,7
57,0
C
± 0,3
25,4
28,0
30,0
32,5
35,0
38,0
41,0
44,5
50,8
57,0
63,5
D
+0,2
4,2
4,2
4,2
4,2
4,2
4,2
4,2
4,2
5,2
5,2
5,2
Front panel mounting
Part No.
Shell size
075-8512-000
075-8513-000
075-8514-000
075-8515-000
075-8516-000
075-8517-000
075-8518-000
075-8519-000
075-8520-000
075-8521-000
075-8522-000
10SL
12S
14S
16S, 16
18
20
22
24
28
32
36
All dimensions are in mm
Subject to changes
36
#1171_CA-COM_englisch_250900
36
18.10.2000, 8:23 Uhr
CA-COM
Contacts
Standard contacts and contacts with
reduced termination size
Size 25
Finish:
A36 - 5 µm silver plated (Standard)
Size 15S
Socket contacts
Contact
size
Termination size
mm2
15S
0,75 - 1,5
0,3 - 0,6
0,14 - 0,38
0,75 - 1,5
0,3 - 0,6
0,14 - 0,38
2,0 - 3,0
0,75 - 1, 5
4,0
0,3 - 0,6
6,0
10,0
2,0 - 3,0
4,0
15
25
100
Part number
with finish
A36
031-8555-110
031-8688-110
031-8555-130
031-8556-110
031-8639-120
031-8556-130
031-8557-000
031-8557-020
031-8557-010
031-8557-040
031-8558-000
031-8559-000
031-8519-010
031-8519-000
Size 100
d1
d2
+0,05
d3
d5
d6
l1
± 0,2
l2
± 0,1
3,2-0,15
3,2-0,15
3,2-0,15
3,2-0,15
3,2-0,15
3,2-0,15
4,8-0,1
4,8-0,1
4,8-0,1
4,8-0,1
6,5-0,2
6,5-0,2
6,5-0,2
6,5-0,2
1,65
1,65
1,65
1,65
1,65
1,65
2,45
2,45
2,45
2,45
3,65
3,65
3,65
3,65
1,75-0,1
1,75-0,1
1,75-0,1
1,75-0,1
1,75-0,1
1,75-0,1
3,3-0,1
3,3-0,1
3,3-0,1
3,3-0,1
6,25-0,2
6,25-0,2
6,25-0,2
6,25-0,2
1,75+0,08
1,2+0,1
0,9+0,05
1,75+0,08
1,2+0,1
0,9+0,05
2,5+0,1
1,75+0,08
2,8+0,1
1,2+0,1
3,5+0,1
4,8+0,1
2,5+0,05
4,55+0,1
2,75-0,05
2,75-0,05
2,75-0,05
2,75-0,05
2,75-0,05
2,75-0,05
3,8-0,1
3,8-0,1
3,8-0,1
3,8-0,1
6,8-0,1
6,8-0,1
6,8-0,1
6,8-0,1
29,1
29,1
29,1
37,8
37,8
37,8
37,0
37,0
37,0
37,0
40,1
40,1
40,1
40,1
3,9
3,9
3,9
7,9
7,9
7,9
7,9
7,9
7,9
7,9
6,35
6,35
6,35
6,35
Pin Contacts
Contact
size
Termination size
mm2
15S
0,75 - 1,5
0,3 - 0,6
0,14 - 0,38
0,75 - 1,5
0,3 - 0,6
0,14 - 0,38
2,0 - 3,0
0,75 - 1, 5
4,0
6,0
10,0
2,0 - 3,0
4,0
15
25
100
Part number
with finish
A36
030-8586-000
330-8744-000
030-8586-010
030-8587-000
330-8659-000
030-8587-030
030-8588-000
030-8588-010
030-8588-054
030-8589-000
030-8590-000
030-8612-010
030-8612-020
d1
–0,05
d4
d6
d7
l1
± 0,15
l3
± 0,5
1,6
1,6
1,6
1,6
1,6
1,6
2,4
2,4
2,4
3,6
3,6
3,6
3,6
1,75-0,1
1,75-0,1
1,75-0,1
1,75-0,1
1,75-0,1
1,75-0,1
3,3-0,15
3,3-0,15
3,3-0,15
6,25-0,15
6,25-0,15
6,25-0,15
6,25-0,15
1,75+0,08
1,2+0,1
0,9+0,05
1,75+0,08
1,2+0,1
0,9+0,05
2,5+0,1
1,75+0,08
2,8+0,1
3,5+0,1
4,8+0,1
2,5+0,05
2,8+0,1
2,75-0,05
2,75-0,05
2,75-0,05
2,75-0,05
2,75-0,05
2,75-0,05
3,8-0,1
3,8-0,1
3,8-0,1
6,8-0,1
6,8-0,1
6,8-0,1
6,8-0,1
27,4
27,4
27,4
31,4
31,4
31,4
37,0
37,0
37,0
39,6
39,6
39,6
39,6
3,85
3,85
3,85
7,9
7,9
7,9
7,9
7,9
7,9
6,35
6,35
6,35
6,35
37
#1171_CA-COM_englisch_250900
37
18.10.2000, 8:23 Uhr
CA-COM
Tooling
Hand crimp tool
for pin / socket contacts acc to VG95234 and Cannon contacts with reduced termination size
Contact
size
Wire size
mm2
15
0,3 – 1,5
15S
0,3 – 1,5
25
0,3 – 4,0
Hand crimp tools
Order reference
Crimp locator
Order reference
M22520-1-01
995-0001-585
TH 452
995-0002-052
Preumatic crimp tool
for pin / socket contacts acc to VG95234 and Cannon contacts with reduced termination size
Contact
size
Wire size
mm2
15
0,3 – 1,5
15S
0,3 – 1,5
25
0,3 – 4,0
Pneumatic table
crimp tool
Order reference
Bench
mount
Order reference
Foot
pedal
Order reference
Crimp
locator
Order reference
WA27F-CE
121586-5067
BM-2
121586-5068
WA10
121586-5069
TH 452
995-0002-052
Hydraulic hand crimp tool
for pin / socket contacts acc to VG95234 and Cannon contacts with reduced termination size
Contact Wire size
size
mm2
100
2,0 – 10,0
Hand pump
Order reference
Foot pedal
Order reference
High pressure
hose 2 m
Order reference
Crimp head
Order reference
4601.00000.330
121586-0027
4601.51000.330
121586-0008
4604.00000.020
121586-0023
4632.00000.601
121586-0031
Safety device
incl.
Bench mounting
Order reference
Positioner
Order reference
Crimp Turrets (upper crimp die)
Order reference
Crimp Turrets (lower crimp die)
Order reference
CT121086-3079
121086-3079
121086-3080
121086-3080
317-8531-000
317-8531-001
Note: Hydraulic electro pump (HK 12EL) upon request.
Insertion tools / Extraction tools
Insertion tools
Contact size
Insertion pliers
Extraction tools
Part No.
Order reference
Part No.
Order reference
Part No.
Order reference
15
CIT 16
121086-3008
CIT-F80-16
121086-0097
CET-F80-16
121086-0081
25
CIT 12
121086-3007
CIT-F80-12
121086-0096
CET-F80-12
121086-0080
100
CIT 8
121086-0095
CET-8
121086-0079
Crimp contacts
Connectors of series CA-COM and CA-COM-B are also available with crimp contacts for AWG wire sizes. In order to wire, insert and extract these contacts the
tools mentioned on this page are needed. All tools have to be ordered separately.
Please ask for our detailed Wiring and Assembly instructions.
All dimensions are in mm
Subject to changes
38
#1171_CA-COM_englisch_250900
38
18.10.2000, 8:23 Uhr
CA-COM
Hand crimp tool
Dimensions (closed, without locator)
220 x 60 x 22 mm
Weight (without turret) approx. 800 g
Pneumatic crimp tool
Pneumatic table crimp tool WA 27F-CE
Hydraulic hand crimp tool
➄
≈
√
➂
1
2
3
4
5
6
Hand pump
Foot pedal
High pressure hose 2 m
Crimp head
Safety device incl. bench mounting
Positioner
(to be used with 121086-3079 only)
Insertion tools / Extraction tools
➁
➀
Technical Data
Hand pump:
Length
Width
Hight
Oil contents
Usable oil quality
Output per lift
560 mm
140 mm
120 mm
900 cm3
730 cm3
2,5 cm3
High pressure hose:
Length
2m
Crimp head:
Crimp force
Lift (with positioners)
Weight (incl. oil)
120 kN
25 mm
13 kg approx.
Insertion tool
Insertion pliers
Extraction tool
39
#1171_CA-COM_englisch_250900
39
18.10.2000, 8:23 Uhr
CA-COM
Product Safety Information
THIS NOTE SHOULD BE READ IN CONJUNCTION WITH
THE PRODUCT DATA SHEET/CATALOGUE. FAILURE TO
OBSERVE THE ADVICE IN THIS INFORMATION SHEET
AND THE OPERATING CONDITIONS SPECIFIED IN THE
PRODUCT DATA SHEET/CATALOGUE COULD RESULT
IN HAZARDOUS SITUATIONS.
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain hazardous
materials. They contain conducting and non-conducting materials and can be divided into two groups.
a) Printed circuit types and low cost audio types which
employ all plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types with
metal casings and either natural rubber, synthetic
rubber, plastic or glass insulating materials.
Contact materials vary with type of connector and
also application and are usually manufactured from
either copper, copper alloys, nickel, alumel, chromel
or steel. In special applications, other alloys may be
specified.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters. Incorrect wiring or assembly of the
connector or careless use of metal tools or conductive fluids, or transit damage to any of the
component parts may cause electric shock or
burns. Live circuits must not be broken by separating mated connectors as this may cause arcing,
ionisation and burning.
Heat dissipation is greater at maximum resistance in
a circuit. Hot spots may occur when resistance is raised
locally by damage, e.g. cracked or deformed contacts,
broken strands of wire. Local overheating may also
result from the use of the incorrect application tools
or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the
Product Data Sheet/Catalogue are exceeded and can
cause breakdown of insulation and hence electric
shock.
If heating is allowed to continue it intensifies by
further increasing the local resistance through loss of
temper of spring contacts, formation of oxide film on
contacts and wires, and leakage currents through
carbonisation of insulation and tracking paths. Fire
can then result in the presence of combustible materials and this may release noxious fumes. Overheating
may not be visually apparent. Burns may result from
touching overheated components.
3. HANDLING
Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp
edges, care must be taken when handling certain
components to avoid injury to fingers.
Electrical connectors may be damaged in transit to
the customers, and damage may result in creation
of hazards. Products should therefore be examined
prior to installation/use and rejected if found to be
damaged.
4. DISPOSAL
Incineration of certain materials may release noxious
or even toxic fumes.
5. APPLICATION
Connectors with exposed contacts should not be
selected for use on the current supply side of an
electrical circuit, because an electric shock could result
from touching exposed contacts on an unmated
connector. Voltages in excess of 30 V ac or 42.5 V dc
are potentially hazardous and care should be taken
to ensure that such voltages can not be transmitted
in any way to exposed metal parts of the connector
body. The connector and wiring should be checked,
before making live, to have no damage to metal parts
or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired
conducting particles. Insulation resistance should be
checked to make certain that no low resistance joints
or spurious conducting path are existing between
contacts and exposed metal parts of the connector
body. Further the contact resistance of the connectors
should be measured within the electrical circuit in
order to identify high resistances which result in
excessive connector heating.
Always use the correct application tools as specified in
the Data Sheet/Catalogue.
Do not permit untrained personnel to wire, assemble or
tramper with connectors.
For operation voltage please see appropriate national
regulations.
IMPORTANT GENERAL INFORMATION.
1. Air and creepage paths/Operating voltage
The admissible operating voltages depend on the
individual applications and the valid national and
other applicable safety regulations.
For this reason the air and creepage path data are
only reference values. Observe reduction of air and
creepage paths due to PC board and/or harnessing.
2. Temperature
All information given are temperature limits. The
operation temperature depends on the individual
application.
3. Other important information
Cannon continuously endeavours to improve their
products. Therefore, Cannon products may deviate
from the description, technical data and shape as
shown in this catalogue and data sheets.
4. Harnessing and Assembly Instructions
If applicable, our special harnessing and/or assembly instruction has to be adhered to. This is provided at request.
ITT Cannon, a division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace; however
these products are intended to be used in accordance with the specifications in this catalog. Any use or application that
deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in
this catalog shall be construed to create any liability on the part of Cannon. Any new issue of this catalog shall automatically
invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations
assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental
or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or
strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability,
prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based
on development samples delivered. This catalog is not to be construed as an offer. It is intended merely as an invitation to
make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other
rights of third parties which may result from its use. Reprinting this catalog is generally permitted, indicating the source.
However, Cannon's prior consent must be obtained in all cases.
Cannon is a trademark of ITT Industries, Inc
All dimensions are in mm
Subject to changes
40
#1171_CA-COM_englisch_250900
40
18.10.2000, 8:23 Uhr
CA-COM
41
#1171_CA-COM_englisch_250900
41
18.10.2000, 8:24 Uhr
Cannon Worldwide Facilities
Austria
Afrikanergasse 3
1020 Vienna
FAX: (1) 2160948
PH: (1) 2160947
Benelux
Residence Leopold
Genèvestreet 10
1140 Brussels, Belgium
FAX: (02) 7269201
PH: (02) 726 75 94
NL
FAX: 31.35.691.8796
PH: 31.35.691.6855
China
No. 24, 2 Block
Taohuawu New District
Zhenjiang, Jiangsu
P.R.C.
FAX: 86 511 4428616
PH: 86 511 443 3399
Denmark
Park Allé 287 A
2605 Brøndby
FAX: 43 43 58 58
PH: 43 45 52 88
Finland
Virkatie 1
1510 Vantaa
FAX:+358 9 70039188
PH: +358 9 70039180
France
2, Ave Sablons Bouillants, B.P. 133
77109 Meaux
FAX: (1) 64 33 16 82
PH: (1) 60 24 51 51
Germany
Postfach 11 20, 71365 Weinstadt
Cannonstrasse 1, 71384 Weinstadt
FAX: (07151) 699217
PH: (07151) 699-0
Hong Kong
Unit 901 & 912, West Tower
Shun Tak Center
168-200 Connaught Road
Central
FAX: (852) 2732-2919
PH: (852) 2732-2720
Italy
Via Panzeri 10
20123 Milano
FAX: (02) 8372036
PH: (02) 581801
Japan
5362-1, 5-chome, Hibarigaoka
Zama-shi, Kanagawa 228
FAX: 0462-57-1680
PH: 0462-57-2010
Korea
620, Changkang Bldg.
#22, Dohwa-dong, Mapo-ku
Seoul
FAX: (02) 717 7330
PH: (02) 702 7111
Spain
Parque Empresarial San Fernando
Edificio Italia 1a Planta
28830 Madrid
FAX: (34) 91 656 15 83
PH: (34) 91 656 03 11
Sweden
Norr Mälarstrand 64
Jaktvarvet 1
11235 Stockholm
FAX: (46) 8 650 0072
PH: (46) 8 650 0071
Switzerland
Herzogenmühle 18
8304 Wallisellen
FAX: (01) 830-3104
PH: (01) 830-3888, 830-3613
United Kingdom
Jays Close, Viables Estate
Basingstoke Hampshire RG22 4BA
FAX: (01256) 323356
PH: (01256) 311200
United States
666 E. Dyer Road
Santa Ana, CA 92705-5612
FAX: 714.628.2142
PH: 714.557.4700
INTERNET
http://www.ittcannon.com
© 2000 ITT Industries, Cannon. Printed in Germany. All Rights Reserved.
#1171_CA-COM_englisch_250900
42
18.10.2000, 8:24 Uhr
Similar pages